[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [Qemu-ppc] [PATCH v3 5/5] pci: Fold pci_get_bus_devfn()
From: |
Greg Kurz |
Subject: |
Re: [Qemu-devel] [Qemu-ppc] [PATCH v3 5/5] pci: Fold pci_get_bus_devfn() into its sole caller |
Date: |
Tue, 7 May 2019 12:21:29 +0200 |
On Tue, 7 May 2019 16:23:16 +1000
David Gibson <address@hidden> wrote:
> The only remaining caller of pci_get_bus_devfn() is pci_nic_init_nofail(),
> itself an old compatibility function. Fold the two together to avoid
> re-using the stale interface.
>
> While we're there replace the explicit fprintf()s with error_report().
>
> Signed-off-by: David Gibson <address@hidden>
> ---
> hw/pci/pci.c | 61 +++++++++++++++++++++++++---------------------------
> 1 file changed, 29 insertions(+), 32 deletions(-)
>
> diff --git a/hw/pci/pci.c b/hw/pci/pci.c
> index 7e5f8d001b..90e2743185 100644
> --- a/hw/pci/pci.c
> +++ b/hw/pci/pci.c
> @@ -723,37 +723,6 @@ static int pci_parse_devaddr(const char *addr, int
> *domp, int *busp,
> return 0;
> }
>
> -static PCIBus *pci_get_bus_devfn(int *devfnp, PCIBus *root,
> - const char *devaddr)
> -{
> - int dom, bus;
> - unsigned slot;
> -
> - if (!root) {
> - fprintf(stderr, "No primary PCI bus\n");
> - return NULL;
> - }
> -
> - assert(!root->parent_dev);
> -
> - if (!devaddr) {
> - *devfnp = -1;
> - return pci_find_bus_nr(root, 0);
> - }
> -
> - if (pci_parse_devaddr(devaddr, &dom, &bus, &slot, NULL) < 0) {
> - return NULL;
> - }
> -
> - if (dom != 0) {
> - fprintf(stderr, "No support for non-zero PCI domains\n");
> - return NULL;
> - }
> -
> - *devfnp = PCI_DEVFN(slot, 0);
> - return pci_find_bus_nr(root, bus);
> -}
> -
> static void pci_init_cmask(PCIDevice *dev)
> {
> pci_set_word(dev->cmask + PCI_VENDOR_ID, 0xffff);
> @@ -1895,6 +1864,8 @@ PCIDevice *pci_nic_init_nofail(NICInfo *nd, PCIBus
> *rootbus,
> DeviceState *dev;
> int devfn;
> int i;
> + int dom, busnr;
> + unsigned slot;
>
> if (nd->model && !strcmp(nd->model, "virtio")) {
> g_free(nd->model);
> @@ -1928,7 +1899,33 @@ PCIDevice *pci_nic_init_nofail(NICInfo *nd, PCIBus
> *rootbus,
> exit(1);
> }
>
> - bus = pci_get_bus_devfn(&devfn, rootbus, devaddr);
> + if (!rootbus) {
> + error_report("No primary PCI bus");
> + exit(1);
> + }
> +
> + assert(!rootbus->parent_dev);
> +
> + if (!devaddr) {
> + devfn = -1;
> + busnr = 0;
> + bus = pci_find_bus_nr(rootbus, 0);
This line isn't needed since it is done below...
> + } else {
> + if (pci_parse_devaddr(devaddr, &dom, &busnr, &slot, NULL) < 0) {
> + error_report("Invalid PCI device address %s for device %s",
> + devaddr, nd->model);
> + exit(1);
> + }
> +
> + if (dom != 0) {
> + error_report("No support for non-zero PCI domains");
> + exit(1);
> + }
> +
> + devfn = PCI_DEVFN(slot, 0);
> + }
> +
> + bus = pci_find_bus_nr(rootbus, busnr);
... here.
> if (!bus) {
> error_report("Invalid PCI device address %s for device %s",
> devaddr, nd->model);
Maybe output a different message from the one for pci_parse_devaddr()
failures ? Here, the address is supposed to be well formatted but we
couldn't find the requested bus.
- [Qemu-devel] [PATCH v3 0/5] Simplify some not-really-necessary PCI bus callbacks, David Gibson, 2019/05/07
- [Qemu-devel] [PATCH v3 5/5] pci: Fold pci_get_bus_devfn() into its sole caller, David Gibson, 2019/05/07
- Re: [Qemu-devel] [Qemu-ppc] [PATCH v3 5/5] pci: Fold pci_get_bus_devfn() into its sole caller,
Greg Kurz <=
- [Qemu-devel] [PATCH v3 1/5] pcie: Remove redundant test in pcie_mmcfg_data_{read, write}(), David Gibson, 2019/05/07
- [Qemu-devel] [PATCH v3 4/5] pci: Make is_bridge a bool, David Gibson, 2019/05/07
- [Qemu-devel] [PATCH v3 2/5] pci: Simplify pci_bus_is_root(), David Gibson, 2019/05/07
- [Qemu-devel] [PATCH v3 3/5] pcie: Simplify pci_adjust_config_limit(), David Gibson, 2019/05/07