[Qemu-devel] [PULL 39/44] docs: provide documentation on the POWER9 XIVE interrupt controller

[David Gibson]

From: Cédric Le Goater <address@hidden>

This documents the overall XIVE architecture and the XIVE support for
sPAPR guest machines (pseries).

It also provides documentation on the 'info pic' command.

Signed-off-by: Cédric Le Goater <address@hidden>
Message-Id: <address@hidden>
Reviewed-by: Satheesh Rajendran <address@hidden>
Reviewed-by: Greg Kurz <address@hidden>
Signed-off-by: David Gibson <address@hidden>
---
 MAINTAINERS                   |   1 +
 docs/index.rst                |   1 +
 docs/specs/index.rst          |  13 +++
 docs/specs/ppc-spapr-xive.rst | 174 +++++++++++++++++++++++++++++
 docs/specs/ppc-xive.rst       | 199 ++++++++++++++++++++++++++++++++++
 5 files changed, 388 insertions(+)
 create mode 100644 docs/specs/index.rst
 create mode 100644 docs/specs/ppc-spapr-xive.rst
 create mode 100644 docs/specs/ppc-xive.rst

diff --git a/MAINTAINERS b/MAINTAINERS
index 1f5f8b7a2c..6f0609d61b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1712,6 +1712,7 @@ L: address@hidden
 S: Supported
 F: hw/*/*xive*
 F: include/hw/*/*xive*
+F: docs/*/*xive*
 
 Subsystems
 ----------
diff --git a/docs/index.rst b/docs/index.rst
index 3690955dd1..baa5791c17 100644
--- a/docs/index.rst
+++ b/docs/index.rst
@@ -12,4 +12,5 @@ Welcome to QEMU's documentation!
 
    interop/index
    devel/index
+   specs/index
 
diff --git a/docs/specs/index.rst b/docs/specs/index.rst
new file mode 100644
index 0000000000..2e927519c2
--- /dev/null
+++ b/docs/specs/index.rst
@@ -0,0 +1,13 @@
+. This is the top level page for the 'specs' manual
+
+
+QEMU full-system emulation guest hardware specifications
+========================================================
+
+
+Contents:
+
+.. toctree::
+   :maxdepth: 2
+
+   xive
diff --git a/docs/specs/ppc-spapr-xive.rst b/docs/specs/ppc-spapr-xive.rst
new file mode 100644
index 0000000000..539ce7ca4e
--- /dev/null
+++ b/docs/specs/ppc-spapr-xive.rst
@@ -0,0 +1,174 @@
+XIVE for sPAPR (pseries machines)
+=================================
+
+The POWER9 processor comes with a new interrupt controller
+architecture, called XIVE as "eXternal Interrupt Virtualization
+Engine". It supports a larger number of interrupt sources and offers
+virtualization features which enables the HW to deliver interrupts
+directly to virtual processors without hypervisor assistance.
+
+A QEMU ``pseries`` machine (which is PAPR compliant) using POWER9
+processors can run under two interrupt modes:
+
+- *Legacy Compatibility Mode*
+
+  the hypervisor provides identical interfaces and similar
+  functionality to PAPR+ Version 2.7.  This is the default mode
+
+  It is also referred as *XICS* in QEMU.
+
+- *XIVE native exploitation mode*
+
+  the hypervisor provides new interfaces to manage the XIVE control
+  structures, and provides direct control for interrupt management
+  through MMIO pages.
+
+Which interrupt modes can be used by the machine is negotiated with
+the guest O/S during the Client Architecture Support negotiation
+sequence. The two modes are mutually exclusive.
+
+Both interrupt mode share the same IRQ number space. See below for the
+layout.
+
+CAS Negotiation
+---------------
+
+QEMU advertises the supported interrupt modes in the device tree
+property "ibm,arch-vec-5-platform-support" in byte 23 and the OS
+Selection for XIVE is indicated in the "ibm,architecture-vec-5"
+property byte 23.
+
+The interrupt modes supported by the machine depend on the CPU type
+(POWER9 is required for XIVE) but also on the machine property
+``ic-mode`` which can be set on the command line. It can take the
+following values: ``xics``, ``xive``, ``dual`` and currently ``xics``
+is the default but it may change in the future.
+
+The choosen interrupt mode is activated after a reconfiguration done
+in a machine reset.
+
+XIVE Device tree properties
+---------------------------
+
+The properties for the PAPR interrupt controller node when the *XIVE
+native exploitation mode* is selected shoud contain:
+
+- ``device_type``
+
+  value should be "power-ivpe".
+
+- ``compatible``
+
+  value should be "ibm,power-ivpe".
+
+- ``reg``
+
+  contains the base address and size of the thread interrupt
+  managnement areas (TIMA), for the User level and for the Guest OS
+  level. Only the Guest OS level is taken into account today.
+
+- ``ibm,xive-eq-sizes``
+
+  the size of the event queues. One cell per size supported, contains
+  log2 of size, in ascending order.
+
+- ``ibm,xive-lisn-ranges``
+
+  the IRQ interrupt number ranges assigned to the guest for the IPIs.
+
+The root node also exports :
+
+- ``ibm,plat-res-int-priorities``
+
+  contains a list of priorities that the hypervisor has reserved for
+  its own use.
+
+IRQ number space
+----------------
+
+IRQ Number space of the ``pseries`` machine is 8K wide and is the same
+for both interrupt mode. The different ranges are defined as follow :
+
+- ``0x0000 .. 0x0FFF`` 4K CPU IPIs (only used under XIVE)
+- ``0x1000 .. 0x1000`` 1 EPOW
+- ``0x1001 .. 0x1001`` 1 HOTPLUG
+- ``0x1100 .. 0x11FF`` 256 VIO devices
+- ``0x1200 .. 0x127F`` 32 PHBs devices
+- ``0x1280 .. 0x12FF`` unused
+- ``0x1300 .. 0x1FFF`` PHB MSIs
+
+Monitoring XIVE
+---------------
+
+The state of the XIVE interrupt controller can be queried through the
+monitor commands ``info pic``. The output comes in two parts.
+
+First, the state of the thread interrupt context registers is dumped
+for each CPU :
+
+::
+
+   (qemu) info pic
+   CPU[0000]:   QW   NSR CPPR IPB LSMFB ACK# INC AGE PIPR  W2
+   CPU[0000]: USER    00   00  00    00   00  00  00   00  00000000
+   CPU[0000]:   OS    00   ff  00    00   ff  00  ff   ff  80000400
+   CPU[0000]: POOL    00   00  00    00   00  00  00   00  00000000
+   CPU[0000]: PHYS    00   00  00    00   00  00  00   ff  00000000
+   ...
+
+In the case of a ``pseries`` machine, QEMU acts as the hypervisor and only
+the O/S and USER register rings make sense. ``W2`` contains the vCPU CAM
+line which is set to the VP identifier.
+
+Then comes the routing information which aggregates the EAS and the
+END configuration:
+
+::
+
+   ...
+   LISN         PQ    EISN     CPU/PRIO EQ
+   00000000 MSI --    00000010   0/6    380/16384 @1fe3e0000 ^1 [ 80000010 ... 
]
+   00000001 MSI --    00000010   1/6    305/16384 @1fc230000 ^1 [ 80000010 ... 
]
+   00000002 MSI --    00000010   2/6    220/16384 @1fc2f0000 ^1 [ 80000010 ... 
]
+   00000003 MSI --    00000010   3/6    201/16384 @1fc390000 ^1 [ 80000010 ... 
]
+   00000004 MSI -Q  M 00000000
+   00000005 MSI -Q  M 00000000
+   00000006 MSI -Q  M 00000000
+   00000007 MSI -Q  M 00000000
+   00001000 MSI --    00000012   0/6    380/16384 @1fe3e0000 ^1 [ 80000010 ... 
]
+   00001001 MSI --    00000013   0/6    380/16384 @1fe3e0000 ^1 [ 80000010 ... 
]
+   00001100 MSI --    00000100   1/6    305/16384 @1fc230000 ^1 [ 80000010 ... 
]
+   00001101 MSI -Q  M 00000000
+   00001200 LSI -Q  M 00000000
+   00001201 LSI -Q  M 00000000
+   00001202 LSI -Q  M 00000000
+   00001203 LSI -Q  M 00000000
+   00001300 MSI --    00000102   1/6    305/16384 @1fc230000 ^1 [ 80000010 ... 
]
+   00001301 MSI --    00000103   2/6    220/16384 @1fc2f0000 ^1 [ 80000010 ... 
]
+   00001302 MSI --    00000104   3/6    201/16384 @1fc390000 ^1 [ 80000010 ... 
]
+
+The source information and configuration:
+
+- The ``LISN`` column outputs the interrupt number of the source in
+  range ``[ 0x0 ... 0x1FFF ]`` and its type : ``MSI`` or ``LSI``
+- The ``PQ`` column reflects the state of the PQ bits of the source :
+
+  - ``--`` source is ready to take events
+  - ``P-`` an event was sent and an EOI is PENDING
+  - ``PQ`` an event was QUEUED
+  - ``-Q`` source is OFF
+
+  a ``M`` indicates that source is *MASKED* at the EAS level,
+
+The targeting configuration :
+
+- The ``EISN`` column is the event data that will be queued in the event
+  queue of the O/S.
+- The ``CPU/PRIO`` column is the tuple defining the CPU number and
+  priority queue serving the source.
+- The ``EQ`` column outputs :
+
+  - the current index of the event queue/ the max number of entries
+  - the O/S event queue address
+  - the toggle bit
+  - the last entries that were pushed in the event queue.
diff --git a/docs/specs/ppc-xive.rst b/docs/specs/ppc-xive.rst
new file mode 100644
index 0000000000..b997dc0629
--- /dev/null
+++ b/docs/specs/ppc-xive.rst
@@ -0,0 +1,199 @@
+================================
+POWER9 XIVE interrupt controller
+================================
+
+The POWER9 processor comes with a new interrupt controller
+architecture, called XIVE as "eXternal Interrupt Virtualization
+Engine".
+
+Compared to the previous architecture, the main characteristics of
+XIVE are to support a larger number of interrupt sources and to
+deliver interrupts directly to virtual processors without hypervisor
+assistance. This removes the context switches required for the
+delivery process.
+
+
+XIVE architecture
+=================
+
+The XIVE IC is composed of three sub-engines, each taking care of a
+processing layer of external interrupts:
+
+- Interrupt Virtualization Source Engine (IVSE), or Source Controller
+  (SC). These are found in PCI PHBs, in the PSI host bridge
+  controller, but also inside the main controller for the core IPIs
+  and other sub-chips (NX, CAP, NPU) of the chip/processor. They are
+  configured to feed the IVRE with events.
+- Interrupt Virtualization Routing Engine (IVRE) or Virtualization
+  Controller (VC). It handles event coalescing and perform interrupt
+  routing by matching an event source number with an Event
+  Notification Descriptor (END).
+- Interrupt Virtualization Presentation Engine (IVPE) or Presentation
+  Controller (PC). It maintains the interrupt context state of each
+  thread and handles the delivery of the external interrupt to the
+  thread.
+
+::
+
+                XIVE Interrupt Controller
+                +------------------------------------+      IPIs
+                | +---------+ +---------+ +--------+ |    +-------+
+                | |IVRE     | |Common Q | |IVPE    |----> | CORES |
+                | |     esb | |         | |        |----> |       |
+                | |     eas | |  Bridge | |   tctx |----> |       |
+                | |SC   end | |         | |    nvt | |    |       |
+    +------+    | +---------+ +----+----+ +--------+ |    +-+-+-+-+
+    | RAM  |    +------------------|-----------------+      | | |
+    |      |                       |                        | | |
+    |      |                       |                        | | |
+    |      |  +--------------------v------------------------v-v-v--+    other
+    |      <--+                     Power Bus                      +--> chips
+    |  esb |  +---------+-----------------------+------------------+
+    |  eas |            |                       |
+    |  end |         +--|------+                |
+    |  nvt |       +----+----+ |           +----+----+
+    +------+       |IVSE     | |           |IVSE     |
+                   |         | |           |         |
+                   | PQ-bits | |           | PQ-bits |
+                   | local   |-+           |  in VC  |
+                   +---------+             +---------+
+                      PCIe                 NX,NPU,CAPI
+
+
+    PQ-bits: 2 bits source state machine (P:pending Q:queued)
+    esb: Event State Buffer (Array of PQ bits in an IVSE)
+    eas: Event Assignment Structure
+    end: Event Notification Descriptor
+    nvt: Notification Virtual Target
+    tctx: Thread interrupt Context registers
+
+
+
+XIVE internal tables
+--------------------
+
+Each of the sub-engines uses a set of tables to redirect interrupts
+from event sources to CPU threads.
+
+::
+
+                                            +-------+
+    User or O/S                             |  EQ   |
+        or                          +------>|entries|
+    Hypervisor                      |       |  ..   |
+      Memory                        |       +-------+
+                                    |           ^
+                                    |           |
+               +-------------------------------------------------+
+                                    |           |
+    Hypervisor      +------+    +---+--+    +---+--+   +------+
+      Memory        | ESB  |    | EAT  |    | ENDT |   | NVTT |
+     (skiboot)      +----+-+    +----+-+    +----+-+   +------+
+                      ^  |        ^  |        ^  |       ^
+                      |  |        |  |        |  |       |
+               +-------------------------------------------------+
+                      |  |        |  |        |  |       |
+                      |  |        |  |        |  |       |
+                 +----|--|--------|--|--------|--|-+   +-|-----+    +------+
+                 |    |  |        |  |        |  | |   | | tctx|    |Thread|
+     IPI or   ---+    +  v        +  v        +  v |---| +  .. |----->     |
+    HW events    |                                 |   |       |    |      |
+                 |             IVRE                |   | IVPE  |    +------+
+                 +---------------------------------+   +-------+
+
+
+The IVSE have a 2-bits state machine, P for pending and Q for queued,
+for each source that allows events to be triggered. They are stored in
+an Event State Buffer (ESB) array and can be controlled by MMIOs.
+
+If the event is let through, the IVRE looks up in the Event Assignment
+Structure (EAS) table for an Event Notification Descriptor (END)
+configured for the source. Each Event Notification Descriptor defines
+a notification path to a CPU and an in-memory Event Queue, in which
+will be enqueued an EQ data for the O/S to pull.
+
+The IVPE determines if a Notification Virtual Target (NVT) can handle
+the event by scanning the thread contexts of the VCPUs dispatched on
+the processor HW threads. It maintains the interrupt context state of
+each thread in a NVT table.
+
+XIVE thread interrupt context
+-----------------------------
+
+The XIVE presenter can generate four different exceptions to its
+HW threads:
+
+- hypervisor exception
+- O/S exception
+- Event-Based Branch (user level)
+- msgsnd (doorbell)
+
+Each exception has a state independent from the others called a Thread
+Interrupt Management context. This context is a set of registers which
+lets the thread handle priority management and interrupt
+acknowledgment among other things. The most important ones being :
+
+- Interrupt Priority Register  (PIPR)
+- Interrupt Pending Buffer     (IPB)
+- Current Processor Priority   (CPPR)
+- Notification Source Register (NSR)
+
+TIMA
+~~~~
+
+The Thread Interrupt Management registers are accessible through a
+specific MMIO region, called the Thread Interrupt Management Area
+(TIMA), four aligned pages, each exposing a different view of the
+registers. First page (page address ending in ``0b00``) gives access
+to the entire context and is reserved for the ring 0 view for the
+physical thread context. The second (page address ending in ``0b01``)
+is for the hypervisor, ring 1 view. The third (page address ending in
+``0b10``) is for the operating system, ring 2 view. The fourth (page
+address ending in ``0b11``) is for user level, ring 3 view.
+
+Interrupt flow from an O/S perspective
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+After an event data has been enqueued in the O/S Event Queue, the IVPE
+raises the bit corresponding to the priority of the pending interrupt
+in the register IBP (Interrupt Pending Buffer) to indicate that an
+event is pending in one of the 8 priority queues. The Pending
+Interrupt Priority Register (PIPR) is also updated using the IPB. This
+register represent the priority of the most favored pending
+notification.
+
+The PIPR is then compared to the the Current Processor Priority
+Register (CPPR). If it is more favored (numerically less than), the
+CPU interrupt line is raised and the EO bit of the Notification Source
+Register (NSR) is updated to notify the presence of an exception for
+the O/S. The O/S acknowledges the interrupt with a special load in the
+Thread Interrupt Management Area.
+
+The O/S handles the interrupt and when done, performs an EOI using a
+MMIO operation on the ESB management page of the associate source.
+
+Overview of the QEMU models for XIVE
+====================================
+
+The XiveSource models the IVSE in general, internal and external. It
+handles the source ESBs and the MMIO interface to control them.
+
+The XiveNotifier is a small helper interface interconnecting the
+XiveSource to the XiveRouter.
+
+The XiveRouter is an abstract model acting as a combined IVRE and
+IVPE. It routes event notifications using the EAS and END tables to
+the IVPE sub-engine which does a CAM scan to find a CPU to deliver the
+exception. Storage should be provided by the inheriting classes.
+
+XiveEnDSource is a special source object. It exposes the END ESB MMIOs
+of the Event Queues which are used for coalescing event notifications
+and for escalation. Not used on the field, only to sync the EQ cache
+in OPAL.
+
+Finally, the XiveTCTX contains the interrupt state context of a thread,
+four sets of registers, one for each exception that can be delivered
+to a CPU. These contexts are scanned by the IVPE to find a matching VP
+when a notification is triggered. It also models the Thread Interrupt
+Management Area (TIMA), which exposes the thread context registers to
+the CPU for interrupt management.
-- 
2.21.0