[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [Qemu-block] [RFC] nvme: how to support multiple namesp
From: |
Markus Armbruster |
Subject: |
Re: [Qemu-devel] [Qemu-block] [RFC] nvme: how to support multiple namespaces |
Date: |
Wed, 26 Jun 2019 06:46:46 +0200 |
User-agent: |
Gnus/5.13 (Gnus v5.13) Emacs/26.2 (gnu/linux) |
Cc: QOM maintainers in case I'm talking nonsense about QOM.
Klaus Birkelund <address@hidden> writes:
> On Tue, Jun 25, 2019 at 07:51:29AM +0200, Markus Armbruster wrote:
>> Laszlo Ersek <address@hidden> writes:
>>
>> > On 06/24/19 12:18, Kevin Wolf wrote:
>> >> Am 24.06.2019 um 10:01 hat Klaus Birkelund geschrieben:
>> >>> On Thu, Jun 20, 2019 at 05:37:24PM +0200, Laszlo Ersek wrote:
>> >>>> On 06/17/19 10:12, Klaus Birkelund wrote:
>> >>>>> Hi all,
>> >>>>>
>> >>>>> I'm thinking about how to support multiple namespaces in the NVMe
>> >>>>> device. My first idea was to add a "namespaces" property array to the
>> >>>>> device that references blockdevs, but as Laszlo writes below, this
>> >>>>> might
>> >>>>> not be the best idea. It also makes it troublesome to add per-namespace
>> >>>>> parameters (which is something I will be required to do for other
>> >>>>> reasons). Some of you might remember my first attempt at this that
>> >>>>> included adding a new block driver (derived from raw) that could be
>> >>>>> given certain parameters that would then be stored in the image. But I
>> >>>>> understand that this is a no-go, and I can see why.
>> >>>>>
>> >>>>> I guess the optimal way would be such that the parameters was something
>> >>>>> like:
>> >>>>>
>> >>>>> -blockdev
>> >>>>> raw,node-name=blk_ns1,file.driver=file,file.filename=blk_ns1.img
>> >>>>> -blockdev
>> >>>>> raw,node-name=blk_ns2,file.driver=file,file.filename=blk_ns2.img
>> >>>>> -device nvme-ns,drive=blk_ns1,ns-specific-options
>> >>>>> (nsfeat,mc,dlfeat)...
>> >>>>> -device nvme-ns,drive=blk_ns2,...
>> >>>>> -device nvme,...
>> >>>>>
>> >>>>> My question is how to state the parent/child relationship between the
>> >>>>> nvme and nvme-ns devices. I've been looking at how ide and virtio does
>> >>>>> this, and maybe a "bus" is the right way to go?
>> >>>>
>> >>>> I've added Markus to the address list, because of this question. No
>> >>>> other (new) comments from me on the thread starter at this time, just
>> >>>> keeping the full context.
>> >>>>
>> >>>
>> >>> Hi all,
>> >>>
>> >>> I've succesfully implemented this by introducing a new 'nvme-ns' device
>> >>> model. The nvme device creates a bus named from the device id ('id'
>> >>> parameter) and the nvme-ns devices are then registered on this.
>> >>>
>> >>> This results in an nvme device being creates like this (two namespaces
>> >>> example):
>> >>>
>> >>> -drive file=nvme0n1.img,if=none,id=disk1
>> >>> -drive file=nvme0n2.img,if=none,id=disk2
>> >>> -device nvme,serial=deadbeef,id=nvme0
>> >>> -device nvme-ns,drive=disk1,bus=nvme0,nsid=1
>> >>> -device nvme-ns,drive=disk2,bus=nvme0,nsid=2
>> >>>
>> >>> How does that look as a way forward?
>> >>
>> >> This looks very similar to what other devices do (one bus controller
>> >> that has multiple devices on its but), so I like it.
>>
>> Devices can be wired together without a bus intermediary. You
>> definitely want a bus when the physical connection you model has one.
>> If not, a bus may be useful anyway, say because it provides a convenient
>> way to encapsulate the connection model, or to support -device bus=...
>>
>
> I'm not sure how to wire it together without the bus abstraction? So
> I'll stick with the bus for now. It *is* extremely convenient!
As far as I can tell offhand, a common use of bus-less connections
between devices is wiring together composite devices. Example:
static void designware_pcie_host_init(Object *obj)
{
DesignwarePCIEHost *s = DESIGNWARE_PCIE_HOST(obj);
DesignwarePCIERoot *root = &s->root;
object_initialize_child(obj, "root", root, sizeof(*root),
TYPE_DESIGNWARE_PCIE_ROOT, &error_abort, NULL);
qdev_prop_set_int32(DEVICE(root), "addr", PCI_DEVFN(0, 0));
qdev_prop_set_bit(DEVICE(root), "multifunction", false);
}
This creates a TYPE_DESIGNWARE_PCIE_ROOT device "within" the
TYPE_DESIGNWARE_PCIE_HOST device.
Bus-less connections between separate devices (i.e. neither device is a
part of the other) are also possible. But I'm failing at grep right
now. Here's an example for connecting a device to a machine:
static void mch_realize(PCIDevice *d, Error **errp)
{
int i;
MCHPCIState *mch = MCH_PCI_DEVICE(d);
[...]
object_property_add_const_link(qdev_get_machine(), "smram",
OBJECT(&mch->smram), &error_abort);
[...]
}
Paolo, can you provide guidance on when to use a bus, and when not to?
- [Qemu-devel] [RFC] nvme: how to support multiple namespaces, Klaus Birkelund, 2019/06/17
- Re: [Qemu-devel] [RFC] nvme: how to support multiple namespaces, Laszlo Ersek, 2019/06/20
- Re: [Qemu-devel] [Qemu-block] [RFC] nvme: how to support multiple namespaces, Klaus Birkelund, 2019/06/24
- Re: [Qemu-devel] [Qemu-block] [RFC] nvme: how to support multiple namespaces, Kevin Wolf, 2019/06/24
- Re: [Qemu-devel] [Qemu-block] [RFC] nvme: how to support multiple namespaces, Laszlo Ersek, 2019/06/24
- Re: [Qemu-devel] [Qemu-block] [RFC] nvme: how to support multiple namespaces, Markus Armbruster, 2019/06/25
- Re: [Qemu-devel] [Qemu-block] [RFC] nvme: how to support multiple namespaces, Klaus Birkelund, 2019/06/25
- Re: [Qemu-devel] [Qemu-block] [RFC] nvme: how to support multiple namespaces,
Markus Armbruster <=
- Re: [Qemu-devel] [Qemu-block] [RFC] nvme: how to support multiple namespaces, Paolo Bonzini, 2019/06/26
- Re: [Qemu-devel] [Qemu-block] [RFC] nvme: how to support multiple namespaces, Klaus Birkelund, 2019/06/26
- Re: [Qemu-devel] [Qemu-block] [RFC] nvme: how to support multiple namespaces, Kevin Wolf, 2019/06/25
- Re: [Qemu-devel] [Qemu-block] [RFC] nvme: how to support multiple namespaces, Klaus Birkelund, 2019/06/25
- Re: [Qemu-devel] [Qemu-block] [RFC] nvme: how to support multiple namespaces, Markus Armbruster, 2019/06/26