Re: [Qemu-devel] [PATCH v6 06/14] hmat acpi: Build Memory Proximity Domain Attributes Structure(s)

[Jonathan Cameron]

On Sun, 7 Jul 2019 22:29:50 +0800
Tao Xu <address@hidden> wrote:

> From: Liu Jingqi <address@hidden>
> 
> HMAT is defined in ACPI 6.3: 5.2.27 Heterogeneous Memory Attribute Table
> (HMAT). The specification references below link:
> http://www.uefi.org/sites/default/files/resources/ACPI_6_3_final_Jan30.pdf
> 
> It describes the memory attributes, such as memory side cache
> attributes and bandwidth and latency details, related to the
> Memory Proximity Domain. The software is
> expected to use this information as hint for optimization.
> 
> This structure describes Memory Proximity Domain Attributes by memory
> subsystem and its associativity with processor proximity domain as well as
> hint for memory usage.
> 
> Signed-off-by: Liu Jingqi <address@hidden>
> Signed-off-by: Tao Xu <address@hidden>
Looks good to me.  Thanks for changing to 6.3.

Reviewed-by: Jonathan Cameron <address@hidden>

> ---
> 
> Changes in v6:
> Update to ACPI 6.3, main changes are:
>     - Renamed as Memory Proximity Domain Attributes, use numa nodes to
>       replace memory ranges
>     - Use "-numa initiator" to describe "the Attached Initiator", more
>       clear for memory topology
>     - Because HMAT does not use memory ranges, remove the codes to build
>       mem_renges for dimm device
> ---
>  hw/acpi/Kconfig       |   5 +++
>  hw/acpi/Makefile.objs |   1 +
>  hw/acpi/hmat.c        | 101 ++++++++++++++++++++++++++++++++++++++++++
>  hw/acpi/hmat.h        |  45 +++++++++++++++++++
>  hw/i386/acpi-build.c  |   3 ++
>  5 files changed, 155 insertions(+)
>  create mode 100644 hw/acpi/hmat.c
>  create mode 100644 hw/acpi/hmat.h
> 
> diff --git a/hw/acpi/Kconfig b/hw/acpi/Kconfig
> index 7c59cf900b..039bb99efa 100644
> --- a/hw/acpi/Kconfig
> +++ b/hw/acpi/Kconfig
> @@ -7,6 +7,7 @@ config ACPI_X86
>      select ACPI_NVDIMM
>      select ACPI_CPU_HOTPLUG
>      select ACPI_MEMORY_HOTPLUG
> +    select ACPI_HMAT
>  
>  config ACPI_X86_ICH
>      bool
> @@ -31,3 +32,7 @@ config ACPI_VMGENID
>      bool
>      default y
>      depends on PC
> +
> +config ACPI_HMAT
> +    bool
> +    depends on ACPI
> diff --git a/hw/acpi/Makefile.objs b/hw/acpi/Makefile.objs
> index 9bb2101e3b..c05019b059 100644
> --- a/hw/acpi/Makefile.objs
> +++ b/hw/acpi/Makefile.objs
> @@ -6,6 +6,7 @@ common-obj-$(CONFIG_ACPI_MEMORY_HOTPLUG) += memory_hotplug.o
>  common-obj-$(CONFIG_ACPI_CPU_HOTPLUG) += cpu.o
>  common-obj-$(CONFIG_ACPI_NVDIMM) += nvdimm.o
>  common-obj-$(CONFIG_ACPI_VMGENID) += vmgenid.o
> +common-obj-$(CONFIG_ACPI_HMAT) += hmat.o
>  common-obj-$(call lnot,$(CONFIG_ACPI_X86)) += acpi-stub.o
>  
>  common-obj-y += acpi_interface.o
> diff --git a/hw/acpi/hmat.c b/hw/acpi/hmat.c
> new file mode 100644
> index 0000000000..abf99b1adc
> --- /dev/null
> +++ b/hw/acpi/hmat.c
> @@ -0,0 +1,101 @@
> +/*
> + * HMAT ACPI Implementation
> + *
> + * Copyright(C) 2019 Intel Corporation.
> + *
> + * Author:
> + *  Liu jingqi <address@hidden>
> + *  Tao Xu <address@hidden>
> + *
> + * HMAT is defined in ACPI 6.3: 5.2.27 Heterogeneous Memory Attribute Table
> + * (HMAT)
> + *
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2 of the License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, see 
> <http://www.gnu.org/licenses/>
> + */
> +
> +#include "qemu/osdep.h"
> +#include "sysemu/numa.h"
> +#include "hw/acpi/hmat.h"
> +
> +/*
> + * ACPI 6.3:
> + * 5.2.27.3 Memory Proximity Domain Attributes Structure: Table 5-141
> + */
> +static void build_hmat_mpda(GArray *table_data, uint16_t flags, int 
> initiator,
> +                           int mem_node)
> +{
> +
> +    /* Memory Proximity Domain Attributes Structure */
> +    /* Type */
> +    build_append_int_noprefix(table_data, 0, 2);
> +    /* Reserved */
> +    build_append_int_noprefix(table_data, 0, 2);
> +    /* Length */
> +    build_append_int_noprefix(table_data, 40, 4);
> +    /* Flags */
> +    build_append_int_noprefix(table_data, flags, 2);
> +    /* Reserved */
> +    build_append_int_noprefix(table_data, 0, 2);
> +    /* Proximity Domain for the Attached Initiator */
> +    build_append_int_noprefix(table_data, initiator, 4);
> +    /* Proximity Domain for the Memory */
> +    build_append_int_noprefix(table_data, mem_node, 4);
> +    /* Reserved */
> +    build_append_int_noprefix(table_data, 0, 4);
> +    /*
> +     * Reserved:
> +     * Previously defined as the Start Address of the System Physical
> +     * Address Range. Deprecated since ACPI Spec 6.3.
> +     */
> +    build_append_int_noprefix(table_data, 0, 8);
> +    /*
> +     * Reserved:
> +     * Previously defined as the Range Length of the region in bytes.
> +     * Deprecated since ACPI Spec 6.3.
> +     */
> +    build_append_int_noprefix(table_data, 0, 8);
> +}
> +
> +/* Build HMAT sub table structures */
> +static void hmat_build_table_structs(GArray *table_data, NumaState *nstat)
> +{
> +    uint16_t flags;
> +    int i;
> +
> +    for (i = 0; i < nstat->num_nodes; i++) {
> +        flags = 0;
> +
> +        if (nstat->nodes[i].initiator_valid) {
> +            flags |= HMAT_PROX_INIT_VALID;
> +        }
> +
> +        build_hmat_mpda(table_data, flags, nstat->nodes[i].initiator, i);
> +    }
> +}
> +
> +void build_hmat(GArray *table_data, BIOSLinker *linker, NumaState *nstat)
> +{
> +    uint64_t hmat_start;
> +
> +    hmat_start = table_data->len;
> +
> +    /* reserve space for HMAT header  */
> +    acpi_data_push(table_data, 40);
> +
> +    hmat_build_table_structs(table_data, nstat);
> +
> +    build_header(linker, table_data,
> +                 (void *)(table_data->data + hmat_start),
> +                 "HMAT", table_data->len - hmat_start, 2, NULL, NULL);
> +}
> diff --git a/hw/acpi/hmat.h b/hw/acpi/hmat.h
> new file mode 100644
> index 0000000000..574cfba60a
> --- /dev/null
> +++ b/hw/acpi/hmat.h
> @@ -0,0 +1,45 @@
> +/*
> + * HMAT ACPI Implementation Header
> + *
> + * Copyright(C) 2019 Intel Corporation.
> + *
> + * Author:
> + *  Liu jingqi <address@hidden>
> + *  Tao Xu <address@hidden>
> + *
> + * HMAT is defined in ACPI 6.3: 5.2.27 Heterogeneous Memory Attribute Table
> + * (HMAT)
> + *
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2 of the License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, see 
> <http://www.gnu.org/licenses/>
> + */
> +
> +#ifndef HMAT_H
> +#define HMAT_H
> +
> +#include "hw/acpi/acpi-defs.h"
> +#include "hw/acpi/acpi.h"
> +#include "hw/acpi/bios-linker-loader.h"
> +#include "hw/acpi/aml-build.h"
> +
> +/*
> + * ACPI 6.3: 5.2.27.3 Memory Proximity Domain Attributes Structure,
> + * Table 5-141, Field "flag", Bit [0]: set to 1 to indicate that data in
> + * the Proximity Domain for the Attached Initiator field is valid.
> + * Other bits reserved.
> + */
> +#define HMAT_PROX_INIT_VALID 0x1
> +
> +void build_hmat(GArray *table_data, BIOSLinker *linker, NumaState *nstat);
> +
> +#endif
> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> index 0e451e06d1..34f2f898ce 100644
> --- a/hw/i386/acpi-build.c
> +++ b/hw/i386/acpi-build.c
> @@ -65,6 +65,7 @@
>  #include "hw/i386/intel_iommu.h"
>  
>  #include "hw/acpi/ipmi.h"
> +#include "hw/acpi/hmat.h"
>  
>  /* These are used to size the ACPI tables for -M pc-i440fx-1.7 and
>   * -M pc-i440fx-2.0.  Even if the actual amount of AML generated grows
> @@ -2684,6 +2685,8 @@ void acpi_build(AcpiBuildTables *tables, MachineState 
> *machine)
>              acpi_add_table(table_offsets, tables_blob);
>              build_slit(tables_blob, tables->linker, machine);
>          }
> +        acpi_add_table(table_offsets, tables_blob);
> +        build_hmat(tables_blob, tables->linker, machine->numa_state);
>      }
>      if (acpi_get_mcfg(&mcfg)) {
>          acpi_add_table(table_offsets, tables_blob);