[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH-for-4.2 v9 06/12] hw/arm/virt: Enable device mem
From: |
Auger Eric |
Subject: |
Re: [Qemu-devel] [PATCH-for-4.2 v9 06/12] hw/arm/virt: Enable device memory cold/hot plug with ACPI boot |
Date: |
Sun, 1 Sep 2019 13:22:44 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Thunderbird/60.4.0 |
Hi Shameer,
On 9/1/19 1:18 PM, Auger Eric wrote:
> Hi Shameer,
>
> On 8/13/19 11:05 PM, Shameer Kolothum wrote:
>> This initializes the GED device with base memory and irq, configures
>> ged memory hotplug event and builds the corresponding aml code. With
>> this, both hot and cold plug of device memory is enabled now for Guest
>> with ACPI boot.
>>
>> Memory cold plug support with Guest DT boot is not yet supported.
>
> I think you should comment about bios-tables-test-allowed-diff.h update.
> Can't you update the table instead of ignoring the test?
>
> Thanks
>
> Eric
>>
>> Signed-off-by: Shameer Kolothum <address@hidden>
>> ---
>> v8 --> v9
>> -Changes related to GED being a TYPE_SYS_BUS_DEVICE now.
>> -Error propagation to _plug() handler.
>> -Removed R-by by Eric for now.
>>
>> v7 --> v8
>> -Changed no_acpi_dev to no_ged.
>> -Fixed 'dev' reference leak by object_new().
>> -Updated bios-tables-test-allowed-diff.h to avoid "make check"
>> failure.
>>
>> ---
>> hw/arm/Kconfig | 2 +
>> hw/arm/virt-acpi-build.c | 16 +++++++
>> hw/arm/virt.c | 62 ++++++++++++++++++++++++---
>> include/hw/arm/virt.h | 4 ++
>> tests/bios-tables-test-allowed-diff.h | 1 +
>> 5 files changed, 78 insertions(+), 7 deletions(-)
>>
>> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
>> index 84961c17ab..ad7f7c089b 100644
>> --- a/hw/arm/Kconfig
>> +++ b/hw/arm/Kconfig
>> @@ -22,6 +22,8 @@ config ARM_VIRT
>> select ACPI_PCI
>> select MEM_DEVICE
>> select DIMM
>> + select ACPI_MEMORY_HOTPLUG
>> + select ACPI_HW_REDUCED
>>
>> config CHEETAH
>> bool
>> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
>> index 0afb372769..63fa845076 100644
>> --- a/hw/arm/virt-acpi-build.c
>> +++ b/hw/arm/virt-acpi-build.c
>> @@ -40,6 +40,8 @@
>> #include "hw/acpi/aml-build.h"
>> #include "hw/acpi/utils.h"
>> #include "hw/acpi/pci.h"
>> +#include "hw/acpi/memory_hotplug.h"
>> +#include "hw/acpi/generic_event_device.h"
>> #include "hw/pci/pcie_host.h"
>> #include "hw/pci/pci.h"
>> #include "hw/arm/virt.h"
>> @@ -705,6 +707,7 @@ static void
>> build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
>> {
>> Aml *scope, *dsdt;
>> + MachineState *ms = MACHINE(vms);
>> const MemMapEntry *memmap = vms->memmap;
>> const int *irqmap = vms->irqmap;
>>
>> @@ -729,6 +732,19 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
>> VirtMachineState *vms)
>> vms->highmem, vms->highmem_ecam);
>> acpi_dsdt_add_gpio(scope, &memmap[VIRT_GPIO],
>> (irqmap[VIRT_GPIO] + ARM_SPI_BASE));
>> + if (vms->acpi_dev) {
>> + build_ged_aml(scope, "\\_SB."GED_DEVICE,
>> + HOTPLUG_HANDLER(vms->acpi_dev),
>> + irqmap[VIRT_ACPI_GED] + ARM_SPI_BASE,
>> AML_SYSTEM_MEMORY,
>> + memmap[VIRT_ACPI_GED].base);
>> + }
>> +
>> + if (vms->acpi_dev && ms->ram_slots) {
>> + build_memory_hotplug_aml(scope, ms->ram_slots, "\\_SB", NULL,
>> + AML_SYSTEM_MEMORY,
>> + memmap[VIRT_PCDIMM_ACPI].base);
>> + }
>> +
>> acpi_dsdt_add_power_button(scope);
>>
>> aml_append(dsdt, scope);
>> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
>> index ef65e721d2..0949a227a9 100644
>> --- a/hw/arm/virt.c
>> +++ b/hw/arm/virt.c
>> @@ -66,6 +66,7 @@
>> #include "target/arm/internals.h"
>> #include "hw/mem/pc-dimm.h"
>> #include "hw/mem/nvdimm.h"
>> +#include "hw/acpi/generic_event_device.h"
>>
>> #define DEFINE_VIRT_MACHINE_LATEST(major, minor, latest) \
>> static void virt_##major##_##minor##_class_init(ObjectClass *oc, \
>> @@ -136,6 +137,8 @@ static const MemMapEntry base_memmap[] = {
>> [VIRT_GPIO] = { 0x09030000, 0x00001000 },
>> [VIRT_SECURE_UART] = { 0x09040000, 0x00001000 },
>> [VIRT_SMMU] = { 0x09050000, 0x00020000 },
>> + [VIRT_PCDIMM_ACPI] = { 0x09070000, MEMORY_HOTPLUG_IO_LEN },
>> + [VIRT_ACPI_GED] = { 0x09080000, ACPI_GED_EVT_SEL_LEN },
>> [VIRT_MMIO] = { 0x0a000000, 0x00000200 },
>> /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size
>> */
>> [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 },
>> @@ -171,6 +174,7 @@ static const int a15irqmap[] = {
>> [VIRT_PCIE] = 3, /* ... to 6 */
>> [VIRT_GPIO] = 7,
>> [VIRT_SECURE_UART] = 8,
>> + [VIRT_ACPI_GED] = 9,
>> [VIRT_MMIO] = 16, /* ...to 16 + NUM_VIRTIO_TRANSPORTS - 1 */
>> [VIRT_GIC_V2M] = 48, /* ...to 48 + NUM_GICV2M_SPIS - 1 */
>> [VIRT_SMMU] = 74, /* ...to 74 + NUM_SMMU_IRQS - 1 */
>> @@ -520,6 +524,26 @@ static void fdt_add_pmu_nodes(const VirtMachineState
>> *vms)
>> }
>> }
>>
>> +static inline DeviceState *create_acpi_ged(VirtMachineState *vms, qemu_irq
>> *pic)
>> +{
>> + DeviceState *dev;
>> + int irq = vms->irqmap[VIRT_ACPI_GED];
>> + uint32_t event = ACPI_GED_MEM_HOTPLUG_EVT;
>> +
>> + dev = qdev_create(NULL, TYPE_ACPI_GED);
>> + qdev_prop_set_uint32(dev, "ged-event", event);
>> + object_property_add_child(qdev_get_machine(), "acpi-ged",
>> + OBJECT(dev), NULL);
Out of curiosity, what is the object_property_add_child() used for?
Thanks
Eric
>> + qdev_init_nofail(dev);
>> +
>> + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0,
>> vms->memmap[VIRT_ACPI_GED].base);
>> + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1,
>> vms->memmap[VIRT_PCDIMM_ACPI].base);
>> +
>> + sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[irq]);
>> +
>> + return dev;
>> +}
>> +
>> static void create_its(VirtMachineState *vms, DeviceState *gicdev)
>> {
>> const char *itsclass = its_class_name();
>> @@ -1483,6 +1507,7 @@ static void machvirt_init(MachineState *machine)
>> MemoryRegion *ram = g_new(MemoryRegion, 1);
>> bool firmware_loaded;
>> bool aarch64 = true;
>> + bool has_ged = !vmc->no_ged;
>> unsigned int smp_cpus = machine->smp.cpus;
>> unsigned int max_cpus = machine->smp.max_cpus;
>>
>> @@ -1697,6 +1722,10 @@ static void machvirt_init(MachineState *machine)
>>
>> create_gpio(vms, pic);
>>
>> + if (has_ged && aarch64 && firmware_loaded && acpi_enabled) {
>> + vms->acpi_dev = create_acpi_ged(vms, pic);
>> + }
>> +
>> /* Create mmio transports, so the user can create virtio backends
>> * (which will be automatically plugged in to the transports). If
>> * no backend is created the transport will just sit harmlessly idle.
>> @@ -1876,14 +1905,23 @@ static const CPUArchIdList
>> *virt_possible_cpu_arch_ids(MachineState *ms)
>> static void virt_memory_pre_plug(HotplugHandler *hotplug_dev, DeviceState
>> *dev,
>> Error **errp)
>> {
>> + VirtMachineState *vms = VIRT_MACHINE(hotplug_dev);
>> + const bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM);
>> + Error *local_err = NULL;
>>
>> - /*
>> - * The device memory is not yet exposed to the Guest either through
>> - * DT or ACPI and hence both cold/hot plug of memory is explicitly
>> - * disabled for now.
>> - */
>> - if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
>> - error_setg(errp, "memory cold/hot plug is not yet supported");
>> + if (is_nvdimm) {
>> + error_setg(errp, "nvdimm is not yet supported");
>> + return;
>> + }
>> +
>> + if (!vms->acpi_dev) {
>> + error_setg(errp, "memory hotplug is not enabled: missing acpi
>> device");
>> + return;
>> + }
>> +
>> + hotplug_handler_pre_plug(HOTPLUG_HANDLER(vms->acpi_dev), dev,
>> &local_err);
>> + if (local_err) {
>> + error_propagate(errp, local_err);
>> return;
>> }
>>
>> @@ -1893,11 +1931,18 @@ static void virt_memory_pre_plug(HotplugHandler
>> *hotplug_dev, DeviceState *dev,
>> static void virt_memory_plug(HotplugHandler *hotplug_dev,
>> DeviceState *dev, Error **errp)
>> {
>> + HotplugHandlerClass *hhc;
>> VirtMachineState *vms = VIRT_MACHINE(hotplug_dev);
>> Error *local_err = NULL;
>>
>> pc_dimm_plug(PC_DIMM(dev), MACHINE(vms), &local_err);
>> + if (local_err) {
>> + goto out;
>> + }
>>
>> + hhc = HOTPLUG_HANDLER_GET_CLASS(vms->acpi_dev);
>> + hhc->plug(HOTPLUG_HANDLER(vms->acpi_dev), dev, &local_err);
>> +out:
>> error_propagate(errp, local_err);
>> }
>>
>> @@ -2104,8 +2149,11 @@ DEFINE_VIRT_MACHINE_AS_LATEST(4, 2)
>>
>> static void virt_machine_4_1_options(MachineClass *mc)
>> {
>> + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc));
>> +
>> virt_machine_4_2_options(mc);
>> compat_props_add(mc->compat_props, hw_compat_4_1, hw_compat_4_1_len);
>> + vmc->no_ged = true;
>> }
>> DEFINE_VIRT_MACHINE(4, 1)
>>
>> diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
>> index a72094204e..577ee49b4b 100644
>> --- a/include/hw/arm/virt.h
>> +++ b/include/hw/arm/virt.h
>> @@ -77,6 +77,8 @@ enum {
>> VIRT_GPIO,
>> VIRT_SECURE_UART,
>> VIRT_SECURE_MEM,
>> + VIRT_PCDIMM_ACPI,
>> + VIRT_ACPI_GED,
>> VIRT_LOWMEMMAP_LAST,
>> };
>>
>> @@ -106,6 +108,7 @@ typedef struct {
>> bool claim_edge_triggered_timers;
>> bool smbios_old_sys_ver;
>> bool no_highmem_ecam;
>> + bool no_ged; /* Machines < 4.2 has no support for ACPI GED device */
>> } VirtMachineClass;
>>
>> typedef struct {
>> @@ -133,6 +136,7 @@ typedef struct {
>> uint32_t iommu_phandle;
>> int psci_conduit;
>> hwaddr highest_gpa;
>> + DeviceState *acpi_dev;
>> } VirtMachineState;
>>
>> #define VIRT_ECAM_ID(high) (high ? VIRT_HIGH_PCIE_ECAM : VIRT_PCIE_ECAM)
>> diff --git a/tests/bios-tables-test-allowed-diff.h
>> b/tests/bios-tables-test-allowed-diff.h
>> index dfb8523c8b..7b4adbc822 100644
>> --- a/tests/bios-tables-test-allowed-diff.h
>> +++ b/tests/bios-tables-test-allowed-diff.h
>> @@ -1 +1,2 @@
>> /* List of comma-separated changed AML files to ignore */
>> +"tests/data/acpi/virt/DSDT",
>>
>