[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH 23/26] tests/boot_linux_console: Test SDHCI and termal sensor on
From: |
Philippe Mathieu-Daudé |
Subject: |
[PATCH 23/26] tests/boot_linux_console: Test SDHCI and termal sensor on raspi3 |
Date: |
Mon, 28 Oct 2019 08:34:38 +0100 |
From: Philippe Mathieu-Daudé <address@hidden>
Add a test which loads the root filesystem on a SD card.
Use a kernel recent enough to also test the thermal sensor.
The kernel image comes from:
https://github.com/sakaki-/bcmrpi3-kernel#description
The cpio image used comes from the linux-build-test project:
https://github.com/groeck/linux-build-test
Reviewed-by: Cleber Rosa <address@hidden>
Tested-by: Cleber Rosa <address@hidden>
Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
---
v2: Use archive.gzip_uncompress (Cleber)
---
tests/acceptance/boot_linux_console.py | 46 ++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/tests/acceptance/boot_linux_console.py
b/tests/acceptance/boot_linux_console.py
index dc27d79199..44a046bd64 100644
--- a/tests/acceptance/boot_linux_console.py
+++ b/tests/acceptance/boot_linux_console.py
@@ -386,6 +386,52 @@ class BootLinuxConsole(MachineTest):
exec_command_and_wait_for_pattern(self, 'reboot',
'reboot: Restarting system')
+ def test_arm_raspi3_initrd_sd_temp(self):
+ """
+ :avocado: tags=arch:aarch64
+ :avocado: tags=machine:raspi3
+ """
+ tarball_url = ('https://github.com/sakaki-/bcmrpi3-kernel/releases/'
+ 'download/4.19.71.20190910/'
+ 'bcmrpi3-kernel-4.19.71.20190910.tar.xz')
+ tarball_hash = '844f117a1a6de0532ba92d2a7bceb5b2acfbb298'
+ tarball_path = self.fetch_asset(tarball_url, asset_hash=tarball_hash)
+ archive.extract(tarball_path, self.workdir)
+ dtb_path = self.workdir + "/boot/bcm2837-rpi-3-b.dtb"
+ kernel_path = self.workdir + "/boot/kernel8.img"
+
+ rootfs_url = ('https://github.com/groeck/linux-build-test/raw/'
+ '9b6b392ea7bc15f0d6632328d429d31c9c6273da/rootfs/'
+ 'arm64/rootfs.ext2.gz')
+ rootfs_hash = 'dbe4136f0b4a0d2180b93fd2a3b9a784f9951d10'
+ rootfs_path_gz = self.fetch_asset(rootfs_url, asset_hash=rootfs_hash)
+ rootfs_path = self.workdir + "rootfs.ext2"
+ archive.gzip_uncompress(rootfs_path_gz, rootfs_path)
+
+ self.vm.set_machine('raspi3')
+ self.vm.set_console()
+ kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE +
+ 'earlycon=pl011,0x3f201000 console=ttyAMA0 ' +
+ 'root=/dev/mmcblk0 rootwait rw ' +
+ 'panic=-1 noreboot')
+ self.vm.add_args('-kernel', kernel_path,
+ '-dtb', dtb_path,
+ '-append', kernel_command_line,
+ '-drive', 'file=' + rootfs_path + ',if=sd,format=raw',
+ '-no-reboot')
+ self.vm.launch()
+
+ self.wait_for_console_pattern('Boot successful.',
+ failure_message='-----[ cut here ]-----')
+
+ exec_command_and_wait_for_pattern(self, 'cat /proc/cpuinfo',
+ 'Raspberry Pi 3 Model B')
+ exec_command_and_wait_for_pattern(self, ('cat /sys/devices/virtual/'
+ 'thermal/thermal_zone0/temp'),
+ '25178')
+ exec_command_and_wait_for_pattern(self, 'reboot',
+ 'reboot: Restarting system')
+
def test_s390x_s390_ccw_virtio(self):
"""
:avocado: tags=arch:s390x
--
2.21.0
- Re: [PATCH 18/26] tests/boot_console: Test booting HP-UX firmware upgrade, (continued)
- [PATCH 19/26] tests/boot_linux_console: Use Avocado archive::gzip_uncompress(), Philippe Mathieu-Daudé, 2019/10/28
- [PATCH 20/26] tests/boot_linux_console: Add a test for the Raspberry Pi 2, Philippe Mathieu-Daudé, 2019/10/28
- [PATCH 21/26] tests/boot_linux_console: Test the raspi2 UART1 (16550 based), Philippe Mathieu-Daudé, 2019/10/28
- [PATCH 22/26] tests/boot_linux_console: Boot Linux and run few commands on raspi3, Philippe Mathieu-Daudé, 2019/10/28
- [PATCH 23/26] tests/boot_linux_console: Test SDHCI and termal sensor on raspi3,
Philippe Mathieu-Daudé <=
- [PATCH 24/26] tests/boot_linux_console: Add initrd test for the Exynos4210, Philippe Mathieu-Daudé, 2019/10/28
- [PATCH 25/26] tests/boot_linux_console: Add sdcard test for the Exynos4210, Philippe Mathieu-Daudé, 2019/10/28
- [PATCH 26/26] tests/boot_linux_console: Run BusyBox on 5KEc 64-bit cpu, Philippe Mathieu-Daudé, 2019/10/28
- Re: [PATCH 00/26] tests/acceptance: Queue for 4.2, no-reply, 2019/10/28
- Re: [PATCH 00/26] tests/acceptance: Queue for 4.2, no-reply, 2019/10/28