qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v6 1/3] hw: rtc: Add Goldfish RTC device


From: Anup Patel
Subject: Re: [PATCH v6 1/3] hw: rtc: Add Goldfish RTC device
Date: Wed, 6 Nov 2019 12:09:55 +0530

On Wed, Nov 6, 2019 at 4:54 AM Philippe Mathieu-Daudé <address@hidden> wrote:
>
> Hi Anup,
>
> On 11/3/19 8:55 AM, Anup Patel wrote:
> > This patch adds model for Google Goldfish virtual platform RTC device.
> >
> > We will be adding Goldfish RTC device to the QEMU RISC-V virt machine
> > for providing real date-time to Guest Linux. The corresponding Linux
> > driver for Goldfish RTC device is already available in upstream Linux.
> >
> > For now, VM migration support is available but untested for Goldfish RTC
> > device. It will be hardened in-future when we implement VM migration for
> > KVM RISC-V.
> >
> > Signed-off-by: Anup Patel <address@hidden>
> > Reviewed-by: Alistair Francis <address@hidden>
> > ---
> >   hw/rtc/Kconfig                |   3 +
> >   hw/rtc/Makefile.objs          |   1 +
> >   hw/rtc/goldfish_rtc.c         | 288 ++++++++++++++++++++++++++++++++++
> >   hw/rtc/trace-events           |   4 +
> >   include/hw/rtc/goldfish_rtc.h |  46 ++++++
>
> Correct path, thanks :)
>
> >   5 files changed, 342 insertions(+)
> >   create mode 100644 hw/rtc/goldfish_rtc.c
> >   create mode 100644 include/hw/rtc/goldfish_rtc.h
> >
> > diff --git a/hw/rtc/Kconfig b/hw/rtc/Kconfig
> > index 45daa8d655..bafe6ac2c9 100644
> > --- a/hw/rtc/Kconfig
> > +++ b/hw/rtc/Kconfig
> > @@ -21,3 +21,6 @@ config MC146818RTC
> >
> >   config SUN4V_RTC
> >       bool
> > +
> > +config GOLDFISH_RTC
> > +    bool
> > diff --git a/hw/rtc/Makefile.objs b/hw/rtc/Makefile.objs
> > index 8dc9fcd3a9..aa208d0d10 100644
> > --- a/hw/rtc/Makefile.objs
> > +++ b/hw/rtc/Makefile.objs
> > @@ -11,3 +11,4 @@ common-obj-$(CONFIG_EXYNOS4) += exynos4210_rtc.o
> >   obj-$(CONFIG_MC146818RTC) += mc146818rtc.o
> >   common-obj-$(CONFIG_SUN4V_RTC) += sun4v-rtc.o
> >   common-obj-$(CONFIG_ASPEED_SOC) += aspeed_rtc.o
> > +common-obj-$(CONFIG_GOLDFISH_RTC) += goldfish_rtc.o
> > diff --git a/hw/rtc/goldfish_rtc.c b/hw/rtc/goldfish_rtc.c
> > new file mode 100644
> > index 0000000000..f71f6eaab0
> > --- /dev/null
> > +++ b/hw/rtc/goldfish_rtc.c
> > @@ -0,0 +1,288 @@
> > +/*
> > + * Goldfish virtual platform RTC
> > + *
> > + * Copyright (C) 2019 Western Digital Corporation or its affiliates.
> > + *
> > + * For more details on Google Goldfish virtual platform refer:
> > + * 
> > https://android.googlesource.com/platform/external/qemu/+/master/docs/GOLDFISH-VIRTUAL-HARDWARE.TXT
>
> I'd use a (fixed) release tag, and not the (unstable) master branch:
>
> https://android.googlesource.com/platform/external/qemu/+/refs/heads/emu-2.0-release/docs/GOLDFISH-VIRTUAL-HARDWARE.TXT

Sure, I will update the URL.

>
> > + *
> > + * This program is free software; you can redistribute it and/or modify it
> > + * under the terms and conditions of the GNU General Public License,
> > + * version 2 or later, as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope it will be useful, but WITHOUT
> > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> > + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
> > for
> > + * more details.
> > + *
> > + * You should have received a copy of the GNU General Public License along 
> > with
> > + * this program.  If not, see <http://www.gnu.org/licenses/>.
> > + */
> > +
> > +#include "qemu/osdep.h"
> > +#include "qemu-common.h"
> > +#include "hw/rtc/goldfish_rtc.h"
> > +#include "migration/vmstate.h"
> > +#include "hw/irq.h"
> > +#include "hw/qdev-properties.h"
> > +#include "hw/sysbus.h"
> > +#include "qemu/timer.h"
> > +#include "sysemu/sysemu.h"
> > +#include "qemu/cutils.h"
> > +#include "qemu/log.h"
> > +
> > +#include "trace.h"
> > +
> > +#define RTC_TIME_LOW            0x00
> > +#define RTC_TIME_HIGH           0x04
> > +#define RTC_ALARM_LOW           0x08
> > +#define RTC_ALARM_HIGH          0x0c
> > +#define RTC_IRQ_ENABLED         0x10
> > +#define RTC_CLEAR_ALARM         0x14
> > +#define RTC_ALARM_STATUS        0x18
> > +#define RTC_CLEAR_INTERRUPT     0x1c
> > +
> > +static void goldfish_rtc_update(GoldfishRTCState *s)
> > +{
> > +    qemu_set_irq(s->irq, (s->irq_pending & s->irq_enabled) ? 1 : 0);
> > +}
> > +
> > +static void goldfish_rtc_interrupt(void *opaque)
> > +{
> > +    GoldfishRTCState *s = (GoldfishRTCState *)opaque;
> > +
> > +    s->alarm_running = 0;
> > +    s->irq_pending = 1;
> > +    goldfish_rtc_update(s);
> > +}
> > +
> > +static uint64_t goldfish_rtc_get_count(GoldfishRTCState *s)
> > +{
> > +    return s->tick_offset + (uint64_t)qemu_clock_get_ns(rtc_clock);
> > +}
> > +
> > +static void goldfish_rtc_clear_alarm(GoldfishRTCState *s)
> > +{
> > +    timer_del(s->timer);
> > +    s->alarm_running = 0;
> > +}
> > +
> > +static void goldfish_rtc_set_alarm(GoldfishRTCState *s)
> > +{
> > +    uint64_t ticks = goldfish_rtc_get_count(s);
> > +    uint64_t event = s->alarm_next;
> > +
> > +    if (event <= ticks) {
> > +        goldfish_rtc_clear_alarm(s);
> > +        goldfish_rtc_interrupt(s);
> > +    } else {
> > +        /*
> > +         * We should be setting timer expiry to:
> > +         *     qemu_clock_get_ns(rtc_clock) + (event - ticks)
> > +         * but this is equivalent to:
> > +         *     event - s->tick_offset
> > +         */
> > +        timer_mod(s->timer, event - s->tick_offset);
> > +        s->alarm_running = 1;
> > +    }
> > +}
> > +
> > +static uint64_t goldfish_rtc_read(void *opaque, hwaddr offset,
> > +                                  unsigned size)
> > +{
> > +    GoldfishRTCState *s = opaque;
> > +    uint64_t r = 0;
> > +
> > +    switch (offset) {
> > +    case RTC_TIME_LOW:
> > +        r = goldfish_rtc_get_count(s) & 0xffffffff;
> > +        break;
> > +    case RTC_TIME_HIGH:
> > +        r = goldfish_rtc_get_count(s) >> 32;
> > +        break;
> > +    case RTC_ALARM_LOW:
> > +        r = s->alarm_next & 0xffffffff;
> > +        break;
> > +    case RTC_ALARM_HIGH:
> > +        r = s->alarm_next >> 32;
> > +        break;
> > +    case RTC_IRQ_ENABLED:
> > +        r = s->irq_enabled;
> > +        break;
> > +    case RTC_ALARM_STATUS:
> > +        r = s->alarm_running;
> > +        break;
> > +    default:
> > +        qemu_log_mask(LOG_GUEST_ERROR,
> > +                      "%s: Bad offset 0x%x\n", __func__, (uint32_t)offset);
>
> Hmm 0x20 is UNIMP.

Sure, I will update.

>
> > +        break;
> > +    }
> > +
> > +    trace_goldfish_rtc_read(offset, r);
> > +
> > +    return r;
> > +}
> > +
> > +static void goldfish_rtc_write(void *opaque, hwaddr offset,
> > +                               uint64_t value, unsigned size)
> > +{
> > +    GoldfishRTCState *s = opaque;
> > +    uint64_t current_tick, new_tick;
> > +
> > +    switch (offset) {
> > +    case RTC_TIME_LOW:
> > +        current_tick = goldfish_rtc_get_count(s);
>
> FYI, this 2 lines ...:
>
> > +        new_tick = current_tick & (0xffffffffULL << 32);
> > +        new_tick |= value;
>
> ... can also be written as:
>
>             new_tick = deposit64(current_tick, 0, 32, value);
>
> (I find this notation easier to review).

Sure, I will use deposite64() here and everywhere below.

Thanks for this suggestion.

>
> > +        s->tick_offset += new_tick - current_tick;
> > +        break;
> > +    case RTC_TIME_HIGH:
> > +        current_tick = goldfish_rtc_get_count(s);
> > +        new_tick = current_tick & 0xffffffffULL;
> > +        new_tick |= (value << 32);
> > +        s->tick_offset += new_tick - current_tick;
> > +        break;
> > +    case RTC_ALARM_LOW:
> > +        s->alarm_next &= (0xffffffffULL << 32);
> > +        s->alarm_next |= value;
> > +        goldfish_rtc_set_alarm(s);
> > +        break;
> > +    case RTC_ALARM_HIGH:
>
> Ditto these ...
>
> > +        s->alarm_next &= 0xffffffffULL;
> > +        s->alarm_next |= (value << 32);
>
> ... as:
>
>             s->alarm_next = deposit64(s->alarm_next, 32, 32, value);
>
> > +        break;
> > +    case RTC_IRQ_ENABLED:
> > +        s->irq_enabled = (uint32_t)(value & 0x1);
> > +        goldfish_rtc_update(s);
> > +        break;
> > +    case RTC_CLEAR_ALARM:
> > +        goldfish_rtc_clear_alarm(s);
> > +        break;
> > +    case RTC_CLEAR_INTERRUPT:
> > +        s->irq_pending = 0;
> > +        goldfish_rtc_update(s);
> > +        break;
> > +    default:
> > +        qemu_log_mask(LOG_GUEST_ERROR,
> > +                      "%s: Bad offset 0x%x\n", __func__, (uint32_t)offset);
>
> 0x20 is UNIMP.
>
> > +        break;
> > +    }
> > +
> > +    trace_goldfish_rtc_write(offset, value);
> > +}
> > +
> > +static int goldfish_rtc_pre_save(void *opaque)
> > +{
> > +    uint64_t delta;
> > +    GoldfishRTCState *s = opaque;
> > +
> > +    /*
> > +     * We want to migrate this offset, which sounds straightforward.
> > +     * Unfortunately, we cannot directly pass tick_offset because
> > +     * rtc_clock on destination Host might not be same source Host.
> > +     *
> > +     * To tackle, this we pass tick_offset relative to vm_clock from
> > +     * source Host and make it relative to rtc_clock at destination Host.
>
> Hmm this is the fix from commit 032cfe6a79c.
>
> > +     */
> > +    delta = qemu_clock_get_ns(rtc_clock) -
> > +            qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
> > +    s->tick_offset_vmstate = s->tick_offset + delta;
> > +
> > +    return 0;
> > +}
> > +
> > +static int goldfish_rtc_post_load(void *opaque, int version_id)
> > +{
> > +    uint64_t delta;
> > +    GoldfishRTCState *s = opaque;
> > +
> > +    /*
> > +     * We extract tick_offset from tick_offset_vmstate by doing
> > +     * reverse math compared to pre_save() function.
> > +     */
> > +    delta = qemu_clock_get_ns(rtc_clock) -
> > +            qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
> > +    s->tick_offset = s->tick_offset_vmstate - delta;
> > +
> > +    return 0;
> > +}
> > +
> > +static const MemoryRegionOps goldfish_rtc_ops = {
> > +    .read = goldfish_rtc_read,
> > +    .write = goldfish_rtc_write,
> > +    .endianness = DEVICE_LITTLE_ENDIAN,
> > +    .valid = {
> > +        .min_access_size = 4,
> > +        .max_access_size = 4
>
> OK.
>
> > +    }
> > +};
> > +
> > +static const VMStateDescription goldfish_rtc_vmstate = {
> > +    .name = TYPE_GOLDFISH_RTC,
> > +    .version_id = 1,
> > +    .pre_save = goldfish_rtc_pre_save,
> > +    .post_load = goldfish_rtc_post_load,
> > +    .fields = (VMStateField[]) {
> > +        VMSTATE_UINT64(tick_offset_vmstate, GoldfishRTCState),
> > +        VMSTATE_UINT64(alarm_next, GoldfishRTCState),
> > +        VMSTATE_UINT32(alarm_running, GoldfishRTCState),
> > +        VMSTATE_UINT32(irq_pending, GoldfishRTCState),
> > +        VMSTATE_UINT32(irq_enabled, GoldfishRTCState),
> > +        VMSTATE_END_OF_LIST()
> > +    }
> > +};
> > +
> > +static void goldfish_rtc_reset(DeviceState *dev)
> > +{
> > +    GoldfishRTCState *s = GOLDFISH_RTC(dev);
> > +    struct tm tm;
> > +
> > +    timer_del(s->timer);
> > +
> > +    qemu_get_timedate(&tm, 0);
> > +    s->tick_offset = mktimegm(&tm);
> > +    s->tick_offset *= NANOSECONDS_PER_SECOND;
> > +    s->tick_offset -= qemu_clock_get_ns(rtc_clock);
> > +    s->tick_offset_vmstate = 0;
> > +    s->alarm_next = 0;
> > +    s->alarm_running = 0;
> > +    s->irq_pending = 0;
> > +    s->irq_enabled = 0;
> > +}
> > +
> > +static void goldfish_rtc_realize(DeviceState *d, Error **errp)
> > +{
> > +    SysBusDevice *dev = SYS_BUS_DEVICE(d);
> > +    GoldfishRTCState *s = GOLDFISH_RTC(d);
> > +
> > +    memory_region_init_io(&s->iomem, OBJECT(s), &goldfish_rtc_ops, s,
> > +                          "goldfish_rtc", 0x1000);
>
> The spec says this device's io region is 0x24 bytes. 0x1000 might be
> your SoC mapping. Restricting it to the spec allow other targets to use
> this device.

Sure, I will update this.

>
> > +    sysbus_init_mmio(dev, &s->iomem);
> > +
> > +    sysbus_init_irq(dev, &s->irq);
> > +
> > +    s->timer = timer_new_ns(rtc_clock, goldfish_rtc_interrupt, s);
> > +}
> > +
> > +static void goldfish_rtc_class_init(ObjectClass *klass, void *data)
> > +{
> > +    DeviceClass *dc = DEVICE_CLASS(klass);
> > +
> > +    dc->realize = goldfish_rtc_realize;
> > +    dc->reset = goldfish_rtc_reset;
> > +    dc->vmsd = &goldfish_rtc_vmstate;
> > +}
> > +
> > +static const TypeInfo goldfish_rtc_info = {
> > +    .name          = TYPE_GOLDFISH_RTC,
> > +    .parent        = TYPE_SYS_BUS_DEVICE,
> > +    .instance_size = sizeof(GoldfishRTCState),
> > +    .class_init    = goldfish_rtc_class_init,
> > +};
> > +
> > +static void goldfish_rtc_register_types(void)
> > +{
> > +    type_register_static(&goldfish_rtc_info);
> > +}
> > +
> > +type_init(goldfish_rtc_register_types)
> > diff --git a/hw/rtc/trace-events b/hw/rtc/trace-events
> > index d6749f4616..0bfaa26cb8 100644
> > --- a/hw/rtc/trace-events
> > +++ b/hw/rtc/trace-events
> > @@ -17,3 +17,7 @@ pl031_set_alarm(uint32_t ticks) "alarm set for %u ticks"
> >   # aspeed-rtc.c
> >   aspeed_rtc_read(uint64_t addr, uint64_t value) "addr 0x%02" PRIx64 " 
> > value 0x%08" PRIx64
> >   aspeed_rtc_write(uint64_t addr, uint64_t value) "addr 0x%02" PRIx64 " 
> > value 0x%08" PRIx64
> > +
> > +# goldfish_rtc.c
> > +goldfish_rtc_read(uint64_t addr, uint64_t value) "addr 0x%02" PRIx64 " 
> > value 0x%08" PRIx64
> > +goldfish_rtc_write(uint64_t addr, uint64_t value) "addr 0x%02" PRIx64 " 
> > value 0x%08" PRIx64
>
> You declared a region of 0x1000 bytes, shouldn't the address format be
> 0x%03? I'd rather use the correct region size and keep 0x02 which is enough.

I will update the region size so we don't need to change here.

>
> > diff --git a/include/hw/rtc/goldfish_rtc.h b/include/hw/rtc/goldfish_rtc.h
> > new file mode 100644
> > index 0000000000..3be586bdcb
> > --- /dev/null
> > +++ b/include/hw/rtc/goldfish_rtc.h
> > @@ -0,0 +1,46 @@
> > +/*
> > + * Goldfish virtual platform RTC
> > + *
> > + * Copyright (C) 2019 Western Digital Corporation or its affiliates.
> > + *
> > + * For more details on Google Goldfish virtual platform refer:
> > + * 
> > https://android.googlesource.com/platform/external/qemu/+/master/docs/GOLDFISH-VIRTUAL-HARDWARE.TXT
> > + *
> > + * This program is free software; you can redistribute it and/or modify it
> > + * under the terms and conditions of the GNU General Public License,
> > + * version 2 or later, as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope it will be useful, but WITHOUT
> > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> > + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
> > for
> > + * more details.
> > + *
> > + * You should have received a copy of the GNU General Public License along 
> > with
> > + * this program.  If not, see <http://www.gnu.org/licenses/>.
> > + */
> > +
> > +#ifndef HW_RTC_GOLDFISH_RTC_H
> > +#define HW_RTC_GOLDFISH_RTC_H
> > +
> > +#include "hw/sysbus.h"
> > +
> > +#define TYPE_GOLDFISH_RTC "goldfish_rtc"
> > +#define GOLDFISH_RTC(obj) \
> > +OBJECT_CHECK(GoldfishRTCState, (obj), TYPE_GOLDFISH_RTC)
>
> Maybe insert some spaces before the macro to improve readability.

Okay.

>
> > +
> > +typedef struct GoldfishRTCState {
> > +    SysBusDevice parent_obj;
> > +
> > +    MemoryRegion iomem;
> > +    QEMUTimer *timer;
> > +    qemu_irq irq;
> > +
> > +    uint64_t tick_offset;
> > +    uint64_t tick_offset_vmstate;
> > +    uint64_t alarm_next;
> > +    uint32_t alarm_running;
> > +    uint32_t irq_pending;
> > +    uint32_t irq_enabled;
> > +} GoldfishRTCState;
> > +
> > +#endif
> >
>
> Rest of the patch looks good.

Thanks,
Anup



reply via email to

[Prev in Thread] Current Thread [Next in Thread]