[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH 2/4] aspeed/scu: Fix W1C behavior
From: |
Cédric Le Goater |
Subject: |
Re: [PATCH 2/4] aspeed/scu: Fix W1C behavior |
Date: |
Tue, 12 Nov 2019 08:45:42 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.1.1 |
On 12/11/2019 07:40, Joel Stanley wrote:
> This models the clock write one to clear registers, and fixes up some
> incorrect behavior in all of the write to clear registers.
>
> There was also a typo in one of the register definitions.
>
> Signed-off-by: Joel Stanley <address@hidden>
Reviewed-by: Cédric Le Goater <address@hidden>
> ---
> hw/misc/aspeed_scu.c | 11 ++++++++---
> 1 file changed, 8 insertions(+), 3 deletions(-)
>
> diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c
> index 717509bc5460..aac4645f8c3c 100644
> --- a/hw/misc/aspeed_scu.c
> +++ b/hw/misc/aspeed_scu.c
> @@ -98,7 +98,7 @@
> #define AST2600_CLK_STOP_CTRL TO_REG(0x80)
> #define AST2600_CLK_STOP_CTRL_CLR TO_REG(0x84)
> #define AST2600_CLK_STOP_CTRL2 TO_REG(0x90)
> -#define AST2600_CLK_STOP_CTR2L_CLR TO_REG(0x94)
> +#define AST2600_CLK_STOP_CTRL2_CLR TO_REG(0x94)
> #define AST2600_SDRAM_HANDSHAKE TO_REG(0x100)
> #define AST2600_HPLL_PARAM TO_REG(0x200)
> #define AST2600_HPLL_EXT TO_REG(0x204)
> @@ -532,11 +532,12 @@ static uint64_t aspeed_ast2600_scu_read(void *opaque,
> hwaddr offset,
> return s->regs[reg];
> }
>
> -static void aspeed_ast2600_scu_write(void *opaque, hwaddr offset, uint64_t
> data,
> +static void aspeed_ast2600_scu_write(void *opaque, hwaddr offset, uint64_t
> data64,
> unsigned size)
> {
> AspeedSCUState *s = ASPEED_SCU(opaque);
> int reg = TO_REG(offset);
> + uint32_t data = data64;
>
> if (reg >= ASPEED_AST2600_SCU_NR_REGS) {
> qemu_log_mask(LOG_GUEST_ERROR,
> @@ -563,15 +564,19 @@ static void aspeed_ast2600_scu_write(void *opaque,
> hwaddr offset, uint64_t data,
> /* fall through */
> case AST2600_SYS_RST_CTRL:
> case AST2600_SYS_RST_CTRL2:
> + case AST2600_CLK_STOP_CTRL:
> + case AST2600_CLK_STOP_CTRL2:
> /* W1S (Write 1 to set) registers */
> s->regs[reg] |= data;
> return;
> case AST2600_SYS_RST_CTRL_CLR:
> case AST2600_SYS_RST_CTRL2_CLR:
> + case AST2600_CLK_STOP_CTRL_CLR:
> + case AST2600_CLK_STOP_CTRL2_CLR:
> case AST2600_HW_STRAP1_CLR:
> case AST2600_HW_STRAP2_CLR:
> /* W1C (Write 1 to clear) registers */
> - s->regs[reg] &= ~data;
> + s->regs[reg - 1] &= ~data;
> return;
>
> case AST2600_RNG_DATA:
>
- [PATCH 0/4] arm/aspeed: Watchdog and SDRAM fixes, Joel Stanley, 2019/11/12
- [PATCH 1/4] aspeed/sdmc: Make ast2600 default 1G, Joel Stanley, 2019/11/12
- [PATCH 2/4] aspeed/scu: Fix W1C behavior, Joel Stanley, 2019/11/12
- Re: [PATCH 2/4] aspeed/scu: Fix W1C behavior,
Cédric Le Goater <=
- [PATCH 3/4] watchdog/aspeed: Improve watchdog timeout message, Joel Stanley, 2019/11/12
- [PATCH 4/4] watchdog/aspeed: Fix AST2600 frequency behaviour, Joel Stanley, 2019/11/12
- Re: [PATCH 0/4] arm/aspeed: Watchdog and SDRAM fixes, no-reply, 2019/11/12