qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v9 Kernel 1/5] vfio: KABI for migration interface for device stat


From: Kirti Wankhede
Subject: [PATCH v9 Kernel 1/5] vfio: KABI for migration interface for device state
Date: Tue, 12 Nov 2019 22:33:36 +0530

- Defined MIGRATION region type and sub-type.
- Used 3 bits to define VFIO device states.
    Bit 0 => _RUNNING
    Bit 1 => _SAVING
    Bit 2 => _RESUMING
    Combination of these bits defines VFIO device's state during migration
    _RUNNING => Normal VFIO device running state. When its reset, it
                indicates _STOPPED state. when device is changed to
                _STOPPED, driver should stop device before write()
                returns.
    _SAVING | _RUNNING => vCPUs are running, VFIO device is running but
                          start saving state of device i.e. pre-copy state
    _SAVING  => vCPUs are stopped, VFIO device should be stopped, and
                save device state,i.e. stop-n-copy state
    _RESUMING => VFIO device resuming state.
    _SAVING | _RESUMING and _RUNNING | _RESUMING => Invalid states
    Bits 3 - 31 are reserved for future use. User should perform
    read-modify-write operation on this field.
- Defined vfio_device_migration_info structure which will be placed at 0th
  offset of migration region to get/set VFIO device related information.
  Defined members of structure and usage on read/write access:
    * device_state: (read/write)
        To convey VFIO device state to be transitioned to. Only 3 bits are
        used as of now, Bits 3 - 31 are reserved for future use.
    * pending bytes: (read only)
        To get pending bytes yet to be migrated for VFIO device.
    * data_offset: (read only)
        To get data offset in migration region from where data exist
        during _SAVING and from where data should be written by user space
        application during _RESUMING state.
    * data_size: (read/write)
        To get and set size in bytes of data copied in migration region
        during _SAVING and _RESUMING state.

Migration region looks like:
 ------------------------------------------------------------------
|vfio_device_migration_info|    data section                      |
|                          |     ///////////////////////////////  |
 ------------------------------------------------------------------
 ^                              ^
 offset 0-trapped part        data_offset

Structure vfio_device_migration_info is always followed by data section
in the region, so data_offset will always be non-0. Offset from where data
to be copied is decided by kernel driver, data section can be trapped or
mapped depending on how kernel driver defines data section.
Data section partition can be defined as mapped by sparse mmap capability.
If mmapped, then data_offset should be page aligned, where as initial
section which contain vfio_device_migration_info structure might not end
at offset which is page aligned.
Vendor driver should decide whether to partition data section and how to
partition the data section. Vendor driver should return data_offset
accordingly.

For user application, data is opaque. User should write data in the same
order as received.

Signed-off-by: Kirti Wankhede <address@hidden>
Reviewed-by: Neo Jia <address@hidden>
---
 include/uapi/linux/vfio.h | 108 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 108 insertions(+)

diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
index 9e843a147ead..35b09427ad9f 100644
--- a/include/uapi/linux/vfio.h
+++ b/include/uapi/linux/vfio.h
@@ -305,6 +305,7 @@ struct vfio_region_info_cap_type {
 #define VFIO_REGION_TYPE_PCI_VENDOR_MASK       (0xffff)
 #define VFIO_REGION_TYPE_GFX                    (1)
 #define VFIO_REGION_TYPE_CCW                   (2)
+#define VFIO_REGION_TYPE_MIGRATION              (3)
 
 /* sub-types for VFIO_REGION_TYPE_PCI_* */
 
@@ -379,6 +380,113 @@ struct vfio_region_gfx_edid {
 /* sub-types for VFIO_REGION_TYPE_CCW */
 #define VFIO_REGION_SUBTYPE_CCW_ASYNC_CMD      (1)
 
+/* sub-types for VFIO_REGION_TYPE_MIGRATION */
+#define VFIO_REGION_SUBTYPE_MIGRATION           (1)
+
+/*
+ * Structure vfio_device_migration_info is placed at 0th offset of
+ * VFIO_REGION_SUBTYPE_MIGRATION region to get/set VFIO device related 
migration
+ * information. Field accesses from this structure are only supported at their
+ * native width and alignment, otherwise the result is undefined and vendor
+ * drivers should return an error.
+ *
+ * device_state: (read/write)
+ *      To indicate vendor driver the state VFIO device should be transitioned
+ *      to. If device state transition fails, write on this field return error.
+ *      It consists of 3 bits:
+ *      - If bit 0 set, indicates _RUNNING state. When its reset, that 
indicates
+ *        _STOPPED state. When device is changed to _STOPPED, driver should 
stop
+ *        device before write() returns.
+ *      - If bit 1 set, indicates _SAVING state. When set, that indicates 
driver
+ *        should start gathering device state information which will be 
provided
+ *        to VFIO user space application to save device's state.
+ *      - If bit 2 set, indicates _RESUMING state. When set, that indicates
+ *        prepare to resume device, data provided through migration region
+ *        should be used to resume device.
+ *      Bits 3 - 31 are reserved for future use. User should perform
+ *      read-modify-write operation on this field.
+ *      _SAVING and _RESUMING bits set at the same time is invalid state.
+ *     Similarly _RUNNING and _RESUMING bits set is invalid state.
+ *
+ * pending bytes: (read only)
+ *      Number of pending bytes yet to be migrated from vendor driver
+ *
+ * data_offset: (read only)
+ *      User application should read data_offset in migration region from where
+ *      user application should read device data during _SAVING state or write
+ *      device data during _RESUMING state. See below for detail of sequence to
+ *      be followed.
+ *
+ * data_size: (read/write)
+ *      User application should read data_size to get size of data copied in
+ *      bytes in migration region during _SAVING state and write size of data
+ *      copied in bytes in migration region during _RESUMING state.
+ *
+ * Migration region looks like:
+ *  ------------------------------------------------------------------
+ * |vfio_device_migration_info|    data section                      |
+ * |                          |     ///////////////////////////////  |
+ * ------------------------------------------------------------------
+ *   ^                              ^
+ *  offset 0-trapped part        data_offset
+ *
+ * Structure vfio_device_migration_info is always followed by data section in
+ * the region, so data_offset will always be non-0. Offset from where data is
+ * copied is decided by kernel driver, data section can be trapped or mapped
+ * or partitioned, depending on how kernel driver defines data section.
+ * Data section partition can be defined as mapped by sparse mmap capability.
+ * If mmapped, then data_offset should be page aligned, where as initial 
section
+ * which contain vfio_device_migration_info structure might not end at offset
+ * which is page aligned.
+ * Vendor driver should decide whether to partition data section and how to
+ * partition the data section. Vendor driver should return data_offset
+ * accordingly.
+ *
+ * Sequence to be followed for _SAVING|_RUNNING device state or pre-copy phase
+ * and for _SAVING device state or stop-and-copy phase:
+ * a. read pending_bytes. If pending_bytes > 0, go through below steps.
+ * b. read data_offset, indicates kernel driver to write data to staging 
buffer.
+ *    Kernel driver should return this read operation only after writing data 
to
+ *    staging buffer is done.
+ * c. read data_size, amount of data in bytes written by vendor driver in
+ *    migration region.
+ * d. read data_size bytes of data from data_offset in the migration region.
+ * e. process data.
+ * f. Loop through a to e. Next read on pending_bytes indicates that read data
+ *    operation from migration region for previous iteration is done.
+ *
+ * Sequence to be followed while _RESUMING device state:
+ * While data for this device is available, repeat below steps:
+ * a. read data_offset from where user application should write data.
+ * b. write data of data_size to migration region from data_offset.
+ * c. write data_size which indicates vendor driver that data is written in
+ *    staging buffer. Vendor driver should read this data from migration
+ *    region and resume device's state.
+ *
+ * For user application, data is opaque. User should write data in the same
+ * order as received.
+ */
+
+struct vfio_device_migration_info {
+       __u32 device_state;         /* VFIO device state */
+#define VFIO_DEVICE_STATE_RUNNING   (1 << 0)
+#define VFIO_DEVICE_STATE_SAVING    (1 << 1)
+#define VFIO_DEVICE_STATE_RESUMING  (1 << 2)
+#define VFIO_DEVICE_STATE_MASK      (VFIO_DEVICE_STATE_RUNNING | \
+                                    VFIO_DEVICE_STATE_SAVING |  \
+                                    VFIO_DEVICE_STATE_RESUMING)
+
+#define VFIO_DEVICE_STATE_INVALID_CASE1    (VFIO_DEVICE_STATE_SAVING | \
+                                           VFIO_DEVICE_STATE_RESUMING)
+
+#define VFIO_DEVICE_STATE_INVALID_CASE2    (VFIO_DEVICE_STATE_RUNNING | \
+                                           VFIO_DEVICE_STATE_RESUMING)
+       __u32 reserved;
+       __u64 pending_bytes;
+       __u64 data_offset;
+       __u64 data_size;
+} __attribute__((packed));
+
 /*
  * The MSIX mappable capability informs that MSIX data of a BAR can be mmapped
  * which allows direct access to non-MSIX registers which happened to be within
-- 
2.7.0




reply via email to

[Prev in Thread] Current Thread [Next in Thread]