[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v4 7/7] multifd: Add zstd compression multifd support
From: |
Juan Quintela |
Subject: |
[PATCH v4 7/7] multifd: Add zstd compression multifd support |
Date: |
Tue, 28 Jan 2020 10:05:50 +0100 |
Signed-off-by: Juan Quintela <address@hidden>
---
Remove CONFIG_ZSTD gross test for enable zstd option. Thanhs Markus!!!
---
hw/core/qdev-properties.c | 2 +-
migration/Makefile.objs | 1 +
migration/migration.c | 9 ++
migration/migration.h | 1 +
migration/multifd-zstd.c | 305 +++++++++++++++++++++++++++++++++++
migration/multifd.h | 2 +-
migration/ram.c | 1 -
qapi/migration.json | 4 +-
tests/qtest/migration-test.c | 10 ++
9 files changed, 331 insertions(+), 4 deletions(-)
create mode 100644 migration/multifd-zstd.c
diff --git a/hw/core/qdev-properties.c b/hw/core/qdev-properties.c
index bf88a50cdf..9440ca78c3 100644
--- a/hw/core/qdev-properties.c
+++ b/hw/core/qdev-properties.c
@@ -645,7 +645,7 @@ const PropertyInfo qdev_prop_fdc_drive_type = {
const PropertyInfo qdev_prop_multifd_method = {
.name = "MultiFDMethod",
.description = "multifd_method values, "
- "none/zlib",
+ "none/zlib/zstd",
.enum_table = &MultiFDMethod_lookup,
.get = get_enum,
.set = set_enum,
diff --git a/migration/Makefile.objs b/migration/Makefile.objs
index 0308caa5c5..0fc619e380 100644
--- a/migration/Makefile.objs
+++ b/migration/Makefile.objs
@@ -9,6 +9,7 @@ common-obj-y += qjson.o
common-obj-y += block-dirty-bitmap.o
common-obj-y += multifd.o
common-obj-y += multifd-zlib.o
+common-obj-$(CONFIG_ZSTD) += multifd-zstd.o
common-obj-$(CONFIG_RDMA) += rdma.o
diff --git a/migration/migration.c b/migration/migration.c
index b690500545..aff081128c 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -2285,6 +2285,15 @@ int migrate_multifd_zlib_level(void)
return s->parameters.multifd_zlib_level;
}
+int migrate_multifd_zstd_level(void)
+{
+ MigrationState *s;
+
+ s = migrate_get_current();
+
+ return s->parameters.multifd_zstd_level;
+}
+
int migrate_use_xbzrle(void)
{
MigrationState *s;
diff --git a/migration/migration.h b/migration/migration.h
index 95e9c196ff..2eb72aee0a 100644
--- a/migration/migration.h
+++ b/migration/migration.h
@@ -302,6 +302,7 @@ bool migrate_pause_before_switchover(void);
int migrate_multifd_channels(void);
MultiFDMethod migrate_multifd_method(void);
int migrate_multifd_zlib_level(void);
+int migrate_multifd_zstd_level(void);
int migrate_use_xbzrle(void);
int64_t migrate_xbzrle_cache_size(void);
diff --git a/migration/multifd-zstd.c b/migration/multifd-zstd.c
new file mode 100644
index 0000000000..a594c1af30
--- /dev/null
+++ b/migration/multifd-zstd.c
@@ -0,0 +1,305 @@
+/*
+ * Multifd zlib compression implementation
+ *
+ * Copyright (c) 2020 Red Hat Inc
+ *
+ * Authors:
+ * Juan Quintela <address@hidden>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include <zstd.h>
+#include "qemu/rcu.h"
+#include "exec/target_page.h"
+#include "qapi/error.h"
+#include "migration.h"
+#include "trace.h"
+#include "multifd.h"
+
+struct zstd_data {
+ /* stream for compression */
+ ZSTD_CStream *zcs;
+ /* stream for decompression */
+ ZSTD_DStream *zds;
+ /* buffers */
+ ZSTD_inBuffer in;
+ ZSTD_outBuffer out;
+ /* compressed buffer */
+ uint8_t *zbuff;
+ /* size of compressed buffer */
+ uint32_t zbuff_len;
+};
+
+/* Multifd zstd compression */
+
+/**
+ * zstd_send_setup: setup send side
+ *
+ * Setup each channel with zstd compression.
+ *
+ * Returns 0 for success or -1 for error
+ *
+ * @p: Params for the channel that we are using
+ * @errp: pointer to an error
+ */
+static int zstd_send_setup(MultiFDSendParams *p, Error **errp)
+{
+ uint32_t page_count = MULTIFD_PACKET_SIZE / qemu_target_page_size();
+ struct zstd_data *z = g_new0(struct zstd_data, 1);
+ int res;
+
+ p->data = z;
+ z->zcs = ZSTD_createCStream();
+ if (!z->zcs) {
+ g_free(z);
+ error_setg(errp, "multifd %d: zstd createCStream failed", p->id);
+ return -1;
+ }
+
+ res = ZSTD_initCStream(z->zcs, migrate_multifd_zstd_level());
+ if (ZSTD_isError(res)) {
+ ZSTD_freeCStream(z->zcs);
+ g_free(z);
+ error_setg(errp, "multifd %d: initCStream failed", p->id);
+ return -1;
+ }
+ /* We will never have more than page_count pages */
+ z->zbuff_len = page_count * qemu_target_page_size();
+ z->zbuff_len *= 2;
+ z->zbuff = g_try_malloc(z->zbuff_len);
+ if (!z->zbuff) {
+ ZSTD_freeCStream(z->zcs);
+ g_free(z);
+ error_setg(errp, "multifd %d: out of memory for zbuff", p->id);
+ return -1;
+ }
+ return 0;
+}
+
+/**
+ * zstd_send_cleanup: cleanup send side
+ *
+ * Close the channel and return memory.
+ *
+ * @p: Params for the channel that we are using
+ */
+static void zstd_send_cleanup(MultiFDSendParams *p, Error **errp)
+{
+ struct zstd_data *z = p->data;
+
+ ZSTD_freeCStream(z->zcs);
+ z->zcs = NULL;
+ g_free(z->zbuff);
+ z->zbuff = NULL;
+ g_free(p->data);
+ p->data = NULL;
+}
+
+/**
+ * zstd_send_prepare: prepare date to be able to send
+ *
+ * Create a compressed buffer with all the pages that we are going to
+ * send.
+ *
+ * Returns 0 for success or -1 for error
+ *
+ * @p: Params for the channel that we are using
+ * @used: number of pages used
+ */
+static int zstd_send_prepare(MultiFDSendParams *p, uint32_t used, Error **errp)
+{
+ struct iovec *iov = p->pages->iov;
+ struct zstd_data *z = p->data;
+ int ret;
+ uint32_t i;
+
+ z->out.dst = z->zbuff;
+ z->out.size = z->zbuff_len;
+ z->out.pos = 0;
+
+ for (i = 0; i < used; i++) {
+ ZSTD_EndDirective flush = ZSTD_e_continue;
+
+ if (i == used - 1) {
+ flush = ZSTD_e_flush;
+ }
+ z->in.src = iov[i].iov_base;
+ z->in.size = iov[i].iov_len;
+ z->in.pos = 0;
+
+ ret = ZSTD_compressStream2(z->zcs, &z->out, &z->in, flush);
+ if (ZSTD_isError(ret)) {
+ error_setg(errp, "multifd %d: compressStream error %s",
+ p->id, ZSTD_getErrorName(ret));
+ return -1;
+ }
+ }
+ p->next_packet_size = z->out.pos;
+ p->flags |= MULTIFD_FLAG_ZSTD;
+
+ return 0;
+}
+
+/**
+ * zstd_send_write: do the actual write of the data
+ *
+ * Do the actual write of the comprresed buffer.
+ *
+ * Returns 0 for success or -1 for error
+ *
+ * @p: Params for the channel that we are using
+ * @used: number of pages used
+ * @errp: pointer to an error
+ */
+static int zstd_send_write(MultiFDSendParams *p, uint32_t used, Error **errp)
+{
+ struct zstd_data *z = p->data;
+
+ return qio_channel_write_all(p->c, (void *)z->zbuff, p->next_packet_size,
+ errp);
+}
+
+/**
+ * zstd_recv_setup: setup receive side
+ *
+ * Create the compressed channel and buffer.
+ *
+ * Returns 0 for success or -1 for error
+ *
+ * @p: Params for the channel that we are using
+ * @errp: pointer to an error
+ */
+static int zstd_recv_setup(MultiFDRecvParams *p, Error **errp)
+{
+ uint32_t page_count = MULTIFD_PACKET_SIZE / qemu_target_page_size();
+ struct zstd_data *z = g_new0(struct zstd_data, 1);
+ int res;
+
+ p->data = z;
+ z->zds = ZSTD_createDStream();
+ if (!z->zds) {
+ g_free(z);
+ error_setg(errp, "multifd %d: zstd createDStream failed", p->id);
+ return -1;
+ }
+
+ res = ZSTD_initDStream(z->zds);
+ if (ZSTD_isError(res)) {
+ ZSTD_freeDStream(z->zds);
+ g_free(z);
+ error_setg(errp, "multifd %d: initDStream failed", p->id);
+ return -1;
+ }
+
+ /* We will never have more than page_count pages */
+ z->zbuff_len = page_count * qemu_target_page_size();
+ /* We know compression "could" use more space */
+ z->zbuff_len *= 2;
+ z->zbuff = g_try_malloc(z->zbuff_len);
+ if (!z->zbuff) {
+ ZSTD_freeDStream(z->zds);
+ g_free(z);
+ error_setg(errp, "multifd %d: out of memory for zbuff", p->id);
+ return -1;
+ }
+ return 0;
+}
+
+/**
+ * zstd_recv_cleanup: setup receive side
+ *
+ * For no compression this function does nothing.
+ *
+ * @p: Params for the channel that we are using
+ */
+static void zstd_recv_cleanup(MultiFDRecvParams *p)
+{
+ struct zstd_data *z = p->data;
+
+ ZSTD_freeDStream(z->zds);
+ z->zds = NULL;
+ g_free(z->zbuff);
+ z->zbuff = NULL;
+ g_free(p->data);
+ p->data = NULL;
+}
+
+/**
+ * zstd_recv_pages: read the data from the channel into actual pages
+ *
+ * Read the compressed buffer, and uncompress it into the actual
+ * pages.
+ *
+ * Returns 0 for success or -1 for error
+ *
+ * @p: Params for the channel that we are using
+ * @used: number of pages used
+ * @errp: pointer to an error
+ */
+static int zstd_recv_pages(MultiFDRecvParams *p, uint32_t used, Error **errp)
+{
+ uint32_t in_size = p->next_packet_size;
+ uint32_t out_size = 0;
+ uint32_t expected_size = used * qemu_target_page_size();
+ uint32_t flags = p->flags & MULTIFD_FLAG_METHOD_MASK;
+ struct zstd_data *z = p->data;
+ int ret;
+ int i;
+
+ if (flags != MULTIFD_FLAG_ZSTD) {
+ error_setg(errp, "multifd %d: flags received %x flags expected %x",
+ p->id, flags, MULTIFD_FLAG_ZSTD);
+ return -1;
+ }
+ ret = qio_channel_read_all(p->c, (void *)z->zbuff, in_size, errp);
+
+ if (ret != 0) {
+ return ret;
+ }
+
+ z->in.src = z->zbuff;
+ z->in.size = in_size;
+ z->in.pos = 0;
+
+ for (i = 0; i < used; i++) {
+ struct iovec *iov = &p->pages->iov[i];
+
+ z->out.dst = iov->iov_base;
+ z->out.size = iov->iov_len;
+ z->out.pos = 0;
+
+ ret = ZSTD_decompressStream(z->zds, &z->out, &z->in);
+ if (ZSTD_isError(ret)) {
+ error_setg(errp, "multifd %d: decompressStream returned %s",
+ p->id, ZSTD_getErrorName(ret));
+ return ret;
+ }
+ out_size += iov->iov_len;
+ }
+ if (out_size != expected_size) {
+ error_setg(errp, "multifd %d: packet size received %d size expected
%d",
+ p->id, out_size, expected_size);
+ return -1;
+ }
+ return 0;
+}
+
+static MultiFDMethods multifd_zstd_ops = {
+ .send_setup = zstd_send_setup,
+ .send_cleanup = zstd_send_cleanup,
+ .send_prepare = zstd_send_prepare,
+ .send_write = zstd_send_write,
+ .recv_setup = zstd_recv_setup,
+ .recv_cleanup = zstd_recv_cleanup,
+ .recv_pages = zstd_recv_pages
+};
+
+static void multifd_zstd_register(void)
+{
+ multifd_register_ops(MULTIFD_METHOD_ZSTD, &multifd_zstd_ops);
+}
+
+migration_init(multifd_zstd_register);
diff --git a/migration/multifd.h b/migration/multifd.h
index 3fa5132f1d..621db316c1 100644
--- a/migration/multifd.h
+++ b/migration/multifd.h
@@ -30,6 +30,7 @@ int multifd_queue_page(QEMUFile *f, RAMBlock *block,
ram_addr_t offset);
#define MULTIFD_FLAG_METHOD_MASK (7 << 1)
#define MULTIFD_FLAG_NOCOMP (1 << 1)
#define MULTIFD_FLAG_ZLIB (2 << 1)
+#define MULTIFD_FLAG_ZSTD (3 << 1)
/* This value needs to be a multiple of qemu_target_page_size() */
#define MULTIFD_PACKET_SIZE (512 * 1024)
@@ -163,6 +164,5 @@ typedef struct {
} MultiFDMethods;
void multifd_register_ops(int method, MultiFDMethods *ops);
-
#endif
diff --git a/migration/ram.c b/migration/ram.c
index 73a141bb60..0ef68798d2 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -28,7 +28,6 @@
#include "qemu/osdep.h"
#include "cpu.h"
-#include <zlib.h>
#include "qemu/cutils.h"
#include "qemu/bitops.h"
#include "qemu/bitmap.h"
diff --git a/qapi/migration.json b/qapi/migration.json
index bb5cb6b4f4..8ccec7fa79 100644
--- a/qapi/migration.json
+++ b/qapi/migration.json
@@ -495,12 +495,14 @@
#
# @none: no compression.
# @zlib: use zlib compression method.
+# @zstd: use zstd compression method.
#
# Since: 5.0
#
##
{ 'enum': 'MultiFDMethod',
- 'data': [ 'none', 'zlib' ] }
+ 'data': [ 'none', 'zlib',
+ { 'name': 'zstd', 'if': 'defined(CONFIG_ZSTD)' } ] }
##
# @MigrationParameter:
diff --git a/tests/qtest/migration-test.c b/tests/qtest/migration-test.c
index 8effed205d..ec9be28bc9 100644
--- a/tests/qtest/migration-test.c
+++ b/tests/qtest/migration-test.c
@@ -1318,6 +1318,13 @@ static void test_multifd_tcp_zlib(void)
test_multifd_tcp("zlib");
}
+#ifdef CONFIG_ZSTD
+static void test_multifd_tcp_zstd(void)
+{
+ test_multifd_tcp("zstd");
+}
+#endif
+
/*
* This test does:
* source target
@@ -1481,6 +1488,9 @@ int main(int argc, char **argv)
qtest_add_func("/migration/multifd/tcp/none", test_multifd_tcp_none);
qtest_add_func("/migration/multifd/tcp/cancel", test_multifd_tcp_cancel);
qtest_add_func("/migration/multifd/tcp/zlib", test_multifd_tcp_zlib);
+#ifdef CONFIG_ZSTD
+ qtest_add_func("/migration/multifd/tcp/zstd", test_multifd_tcp_zstd);
+#endif
ret = g_test_run();
--
2.24.1
- [PATCH v4 0/7] Multifd Migration Compression, Juan Quintela, 2020/01/28
- [PATCH v4 1/7] migration: Add support for modules, Juan Quintela, 2020/01/28
- [PATCH v4 2/7] multifd: Make no compression operations into its own structure, Juan Quintela, 2020/01/28
- [PATCH v4 3/7] multifd: Add multifd-zlib-level parameter, Juan Quintela, 2020/01/28
- [PATCH v4 4/7] multifd: Add zlib compression multifd support, Juan Quintela, 2020/01/28
- [PATCH v4 5/7] configure: Enable test and libs for zstd, Juan Quintela, 2020/01/28
- [PATCH v4 6/7] multifd: Add multifd-zstd-level parameter, Juan Quintela, 2020/01/28
- [PATCH v4 7/7] multifd: Add zstd compression multifd support,
Juan Quintela <=