Re: [PATCH v13 07/10] virtio-iommu-pci: Add virtio iommu pci support

[Michael S. Tsirkin]

On Sat, Jan 25, 2020 at 06:19:52PM +0100, Eric Auger wrote:
> This patch adds virtio-iommu-pci, which is the pci proxy for
> the virtio-iommu device.
> 
> Signed-off-by: Eric Auger <address@hidden>
> Reviewed-by: Jean-Philippe Brucker <address@hidden>

I commented on v11 of this patch:
> > Could you send a smaller patchset without pci/acpi bits for now?
And you answered:
> Yes I am about to send v12.

I guess this patch is here by mistake then?

I think PCI devices should always have config space so guests are
not tempted to find work-arounds. Right?

> ---
> 
> v11 -> v12:
> - added Jean's R-b
> - remove the array of intervals. Will be introduced later?
> 
> v10 -> v11:
> - add the reserved_regions array property
> 
> v9 -> v10:
> - include "hw/qdev-properties.h" header
> 
> v8 -> v9:
> - add the msi-bypass property
> - create virtio-iommu-pci.c
> ---
>  hw/virtio/Makefile.objs          |  1 +
>  hw/virtio/virtio-iommu-pci.c     | 88 ++++++++++++++++++++++++++++++++
>  include/hw/pci/pci.h             |  1 +
>  include/hw/virtio/virtio-iommu.h |  1 +
>  qdev-monitor.c                   |  1 +
>  5 files changed, 92 insertions(+)
>  create mode 100644 hw/virtio/virtio-iommu-pci.c
> 
> diff --git a/hw/virtio/Makefile.objs b/hw/virtio/Makefile.objs
> index 2fd9da7410..4e4d39a0a4 100644
> --- a/hw/virtio/Makefile.objs
> +++ b/hw/virtio/Makefile.objs
> @@ -29,6 +29,7 @@ obj-$(CONFIG_VIRTIO_INPUT_HOST) += virtio-input-host-pci.o
>  obj-$(CONFIG_VIRTIO_INPUT) += virtio-input-pci.o
>  obj-$(CONFIG_VIRTIO_RNG) += virtio-rng-pci.o
>  obj-$(CONFIG_VIRTIO_BALLOON) += virtio-balloon-pci.o
> +obj-$(CONFIG_VIRTIO_IOMMU) += virtio-iommu-pci.o
>  obj-$(CONFIG_VIRTIO_9P) += virtio-9p-pci.o
>  obj-$(CONFIG_VIRTIO_SCSI) += virtio-scsi-pci.o
>  obj-$(CONFIG_VIRTIO_BLK) += virtio-blk-pci.o
> diff --git a/hw/virtio/virtio-iommu-pci.c b/hw/virtio/virtio-iommu-pci.c
> new file mode 100644
> index 0000000000..4cfae1f9df
> --- /dev/null
> +++ b/hw/virtio/virtio-iommu-pci.c
> @@ -0,0 +1,88 @@
> +/*
> + * Virtio IOMMU PCI Bindings
> + *
> + * Copyright (c) 2019 Red Hat, Inc.
> + * Written by Eric Auger
> + *
> + *  This program is free software; you can redistribute it and/or modify
> + *  it under the terms of the GNU General Public License version 2 or
> + *  (at your option) any later version.
> + */
> +
> +#include "qemu/osdep.h"
> +
> +#include "virtio-pci.h"
> +#include "hw/virtio/virtio-iommu.h"
> +#include "hw/qdev-properties.h"
> +
> +typedef struct VirtIOIOMMUPCI VirtIOIOMMUPCI;
> +
> +/*
> + * virtio-iommu-pci: This extends VirtioPCIProxy.
> + *
> + */
> +#define VIRTIO_IOMMU_PCI(obj) \
> +        OBJECT_CHECK(VirtIOIOMMUPCI, (obj), TYPE_VIRTIO_IOMMU_PCI)
> +
> +struct VirtIOIOMMUPCI {
> +    VirtIOPCIProxy parent_obj;
> +    VirtIOIOMMU vdev;
> +};
> +
> +static Property virtio_iommu_pci_properties[] = {
> +    DEFINE_PROP_UINT32("class", VirtIOPCIProxy, class_code, 0),
> +    DEFINE_PROP_END_OF_LIST(),
> +};
> +
> +static void virtio_iommu_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp)
> +{
> +    VirtIOIOMMUPCI *dev = VIRTIO_IOMMU_PCI(vpci_dev);
> +    DeviceState *vdev = DEVICE(&dev->vdev);
> +
> +    qdev_set_parent_bus(vdev, BUS(&vpci_dev->bus));
> +    object_property_set_link(OBJECT(dev),
> +                             OBJECT(pci_get_bus(&vpci_dev->pci_dev)),
> +                             "primary-bus", errp);
> +    object_property_set_bool(OBJECT(vdev), true, "realized", errp);
> +}
> +
> +static void virtio_iommu_pci_class_init(ObjectClass *klass, void *data)
> +{
> +    DeviceClass *dc = DEVICE_CLASS(klass);
> +    VirtioPCIClass *k = VIRTIO_PCI_CLASS(klass);
> +    PCIDeviceClass *pcidev_k = PCI_DEVICE_CLASS(klass);
> +    k->realize = virtio_iommu_pci_realize;
> +    set_bit(DEVICE_CATEGORY_MISC, dc->categories);
> +    dc->props = virtio_iommu_pci_properties;
> +    pcidev_k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET;
> +    pcidev_k->device_id = PCI_DEVICE_ID_VIRTIO_IOMMU;
> +    pcidev_k->revision = VIRTIO_PCI_ABI_VERSION;
> +    pcidev_k->class_id = PCI_CLASS_OTHERS;
> +}
> +
> +static void virtio_iommu_pci_instance_init(Object *obj)
> +{
> +    VirtIOIOMMUPCI *dev = VIRTIO_IOMMU_PCI(obj);
> +
> +    virtio_instance_init_common(obj, &dev->vdev, sizeof(dev->vdev),
> +                                TYPE_VIRTIO_IOMMU);
> +}
> +
> +static const VirtioPCIDeviceTypeInfo virtio_iommu_pci_info = {
> +    .base_name             = TYPE_VIRTIO_IOMMU_PCI,
> +    .generic_name          = "virtio-iommu-pci",
> +    .transitional_name     = "virtio-iommu-pci-transitional",
> +    .non_transitional_name = "virtio-iommu-pci-non-transitional",
> +    .instance_size = sizeof(VirtIOIOMMUPCI),
> +    .instance_init = virtio_iommu_pci_instance_init,
> +    .class_init    = virtio_iommu_pci_class_init,
> +};
> +
> +static void virtio_iommu_pci_register(void)
> +{
> +    virtio_pci_types_register(&virtio_iommu_pci_info);
> +}
> +
> +type_init(virtio_iommu_pci_register)
> +
> +
> diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
> index 2acd8321af..cfedf5a995 100644
> --- a/include/hw/pci/pci.h
> +++ b/include/hw/pci/pci.h
> @@ -86,6 +86,7 @@ extern bool pci_available;
>  #define PCI_DEVICE_ID_VIRTIO_9P          0x1009
>  #define PCI_DEVICE_ID_VIRTIO_VSOCK       0x1012
>  #define PCI_DEVICE_ID_VIRTIO_PMEM        0x1013
> +#define PCI_DEVICE_ID_VIRTIO_IOMMU       0x1014
>  
>  #define PCI_VENDOR_ID_REDHAT             0x1b36
>  #define PCI_DEVICE_ID_REDHAT_BRIDGE      0x0001
> diff --git a/include/hw/virtio/virtio-iommu.h 
> b/include/hw/virtio/virtio-iommu.h
> index 2a2c2ecf83..f39aa0fbb4 100644
> --- a/include/hw/virtio/virtio-iommu.h
> +++ b/include/hw/virtio/virtio-iommu.h
> @@ -25,6 +25,7 @@
>  #include "hw/pci/pci.h"
>  
>  #define TYPE_VIRTIO_IOMMU "virtio-iommu-device"
> +#define TYPE_VIRTIO_IOMMU_PCI "virtio-iommu-device-base"
>  #define VIRTIO_IOMMU(obj) \
>          OBJECT_CHECK(VirtIOIOMMU, (obj), TYPE_VIRTIO_IOMMU)
>  
> diff --git a/qdev-monitor.c b/qdev-monitor.c
> index 3465a1e2d0..97f4022b51 100644
> --- a/qdev-monitor.c
> +++ b/qdev-monitor.c
> @@ -66,6 +66,7 @@ static const QDevAlias qdev_alias_table[] = {
>      { "virtio-input-host-ccw", "virtio-input-host", QEMU_ARCH_S390X },
>      { "virtio-input-host-pci", "virtio-input-host",
>              QEMU_ARCH_ALL & ~QEMU_ARCH_S390X },
> +    { "virtio-iommu-pci", "virtio-iommu", QEMU_ARCH_ALL & ~QEMU_ARCH_S390X },
>      { "virtio-keyboard-ccw", "virtio-keyboard", QEMU_ARCH_S390X },
>      { "virtio-keyboard-pci", "virtio-keyboard",
>              QEMU_ARCH_ALL & ~QEMU_ARCH_S390X },
> -- 
> 2.20.1