qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v4 04/12] target/ppc: Introduce ppc_hash64_use_vrma() helper


From: David Gibson
Subject: [PATCH v4 04/12] target/ppc: Introduce ppc_hash64_use_vrma() helper
Date: Wed, 19 Feb 2020 13:14:01 +1100

When running guests under a hypervisor, the hypervisor obviously needs to
be protected from guest accesses even if those are in what the guest
considers real mode (translation off).  The POWER hardware provides two
ways of doing that: The old way has guest real mode accesses simply offset
and bounds checked into host addresses.  It works, but requires that a
significant chunk of the guest's memory - the RMA - be physically
contiguous in the host, which is pretty inconvenient.  The new way, known
as VRMA, has guest real mode accesses translated in roughly the normal way
but with some special parameters.

In POWER7 and POWER8 the LPCR[VPM0] bit selected between the two modes, but
in POWER9 only VRMA mode is supported and LPCR[VPM0] no longer exists.  We
handle that difference in behaviour in ppc_hash64_set_isi().. but not in
other places that we blindly check LPCR[VPM0].

Correct those instances with a new helper to tell if we should be in VRMA
mode.

Signed-off-by: David Gibson <address@hidden>
Reviewed-by: C├ędric Le Goater <address@hidden>
---
 target/ppc/mmu-hash64.c | 43 ++++++++++++++++++++---------------------
 1 file changed, 21 insertions(+), 22 deletions(-)

diff --git a/target/ppc/mmu-hash64.c b/target/ppc/mmu-hash64.c
index 5fabd93c92..6b3c214879 100644
--- a/target/ppc/mmu-hash64.c
+++ b/target/ppc/mmu-hash64.c
@@ -668,6 +668,21 @@ unsigned ppc_hash64_hpte_page_shift_noslb(PowerPCCPU *cpu,
     return 0;
 }
 
+static bool ppc_hash64_use_vrma(CPUPPCState *env)
+{
+    switch (env->mmu_model) {
+    case POWERPC_MMU_3_00:
+        /*
+         * ISAv3.0 (POWER9) always uses VRMA, the VPM0 field and RMOR
+         * register no longer exist
+         */
+        return true;
+
+    default:
+        return !!(env->spr[SPR_LPCR] & LPCR_VPM0);
+    }
+}
+
 static void ppc_hash64_set_isi(CPUState *cs, uint64_t error_code)
 {
     CPUPPCState *env = &POWERPC_CPU(cs)->env;
@@ -676,15 +691,7 @@ static void ppc_hash64_set_isi(CPUState *cs, uint64_t 
error_code)
     if (msr_ir) {
         vpm = !!(env->spr[SPR_LPCR] & LPCR_VPM1);
     } else {
-        switch (env->mmu_model) {
-        case POWERPC_MMU_3_00:
-            /* Field deprecated in ISAv3.00 - interrupts always go to hyperv */
-            vpm = true;
-            break;
-        default:
-            vpm = !!(env->spr[SPR_LPCR] & LPCR_VPM0);
-            break;
-        }
+        vpm = ppc_hash64_use_vrma(env);
     }
     if (vpm && !msr_hv) {
         cs->exception_index = POWERPC_EXCP_HISI;
@@ -702,15 +709,7 @@ static void ppc_hash64_set_dsi(CPUState *cs, uint64_t dar, 
uint64_t dsisr)
     if (msr_dr) {
         vpm = !!(env->spr[SPR_LPCR] & LPCR_VPM1);
     } else {
-        switch (env->mmu_model) {
-        case POWERPC_MMU_3_00:
-            /* Field deprecated in ISAv3.00 - interrupts always go to hyperv */
-            vpm = true;
-            break;
-        default:
-            vpm = !!(env->spr[SPR_LPCR] & LPCR_VPM0);
-            break;
-        }
+        vpm = ppc_hash64_use_vrma(env);
     }
     if (vpm && !msr_hv) {
         cs->exception_index = POWERPC_EXCP_HDSI;
@@ -799,7 +798,7 @@ int ppc_hash64_handle_mmu_fault(PowerPCCPU *cpu, vaddr 
eaddr,
             if (!(eaddr >> 63)) {
                 raddr |= env->spr[SPR_HRMOR];
             }
-        } else if (env->spr[SPR_LPCR] & LPCR_VPM0) {
+        } else if (ppc_hash64_use_vrma(env)) {
             /* Emulated VRMA mode */
             slb = &env->vrma_slb;
             if (!slb->sps) {
@@ -967,7 +966,7 @@ hwaddr ppc_hash64_get_phys_page_debug(PowerPCCPU *cpu, 
target_ulong addr)
         } else if ((msr_hv || !env->has_hv_mode) && !(addr >> 63)) {
             /* In HV mode, add HRMOR if top EA bit is clear */
             return raddr | env->spr[SPR_HRMOR];
-        } else if (env->spr[SPR_LPCR] & LPCR_VPM0) {
+        } else if (ppc_hash64_use_vrma(env)) {
             /* Emulated VRMA mode */
             slb = &env->vrma_slb;
             if (!slb->sps) {
@@ -1056,8 +1055,7 @@ static void ppc_hash64_update_vrma(PowerPCCPU *cpu)
     slb->sps = NULL;
 
     /* Is VRMA enabled ? */
-    lpcr = env->spr[SPR_LPCR];
-    if (!(lpcr & LPCR_VPM0)) {
+    if (ppc_hash64_use_vrma(env)) {
         return;
     }
 
@@ -1065,6 +1063,7 @@ static void ppc_hash64_update_vrma(PowerPCCPU *cpu)
      * Make one up. Mostly ignore the ESID which will not be needed
      * for translation
      */
+    lpcr = env->spr[SPR_LPCR];
     vsid = SLB_VSID_VRMA;
     vrmasd = (lpcr & LPCR_VRMASD) >> LPCR_VRMASD_SHIFT;
     vsid |= (vrmasd << 4) & (SLB_VSID_L | SLB_VSID_LP);
-- 
2.24.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]