qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v6 02/18] s390x: protvirt: Add diag308 subcodes 8 - 10


From: David Hildenbrand
Subject: Re: [PATCH v6 02/18] s390x: protvirt: Add diag308 subcodes 8 - 10
Date: Wed, 4 Mar 2020 18:06:04 +0100
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.5.0

On 04.03.20 12:42, Janosch Frank wrote:
> For diag308 subcodes 8 - 10 we have a new ipib of type 5. The ipib
> holds the address and length of the secure execution header, as well
> as a list of guest components.
> 
> Each component is a block of memory, for example kernel or initrd,
> which needs to be decrypted by the Ultravisor in order to run a
> protected VM. The secure execution header instructs the Ultravisor on
> how to handle the protected VM and its components.
> 
> Subcodes 8 and 9 are similiar to 5 and 6 and subcode 10 will finally
> start the protected guest.
> 
> Subcodes 8-10 are not valid in protected mode, we have to do a subcode
> 3 and then the 8 and 10 combination for a protected reboot.
> 
> Signed-off-by: Janosch Frank <address@hidden>
> ---
>  hw/s390x/ipl.c      | 47 ++++++++++++++++++++++++++++++++++++++++++---
>  hw/s390x/ipl.h      | 32 ++++++++++++++++++++++++++++++
>  target/s390x/diag.c | 26 ++++++++++++++++++++++---
>  3 files changed, 99 insertions(+), 6 deletions(-)
> 
> diff --git a/hw/s390x/ipl.c b/hw/s390x/ipl.c
> index 9c1ecd423c..80c6ab233a 100644
> --- a/hw/s390x/ipl.c
> +++ b/hw/s390x/ipl.c
> @@ -538,15 +538,55 @@ static bool is_virtio_scsi_device(IplParameterBlock 
> *iplb)
>      return is_virtio_ccw_device_of_type(iplb, VIRTIO_ID_SCSI);
>  }
>  
> +int s390_ipl_pv_check_components(IplParameterBlock *iplb)
> +{
> +    int i;
> +    IPLBlockPV *ipib_pv = &iplb->pv;
> +
> +    if (ipib_pv->num_comp == 0) {
> +        return -EINVAL;
> +    }
> +
> +    for (i = 0; i < ipib_pv->num_comp; i++) {
> +        /* Addr must be 4k aligned */
> +        if (ipib_pv->components[i].addr & ~TARGET_PAGE_MASK) {
> +            return -EINVAL;
> +        }
> +
> +        /* Tweak prefix is monotonously increasing with each component */
> +        if (i < ipib_pv->num_comp - 1 &&
> +            ipib_pv->components[i].tweak_pref >
> +            ipib_pv->components[i + 1].tweak_pref) {
> +            return -EINVAL;
> +        }
> +    }
> +    return 0;
> +}
> +
>  void s390_ipl_update_diag308(IplParameterBlock *iplb)
>  {
>      S390IPLState *ipl = get_ipl_device();
>  
> -    ipl->iplb = *iplb;
> -    ipl->iplb_valid = true;
> +    if (iplb->pbt == S390_IPL_TYPE_PV) {
> +        ipl->iplb_pv = *iplb;
> +        ipl->iplb_valid_pv = true;
> +    } else {
> +        ipl->iplb = *iplb;
> +        ipl->iplb_valid = true;
> +    }
>      ipl->netboot = is_virtio_net_device(iplb);
>  }
>  
> +IplParameterBlock *s390_ipl_get_iplb_secure(void)
> +{
> +    S390IPLState *ipl = get_ipl_device();
> +
> +    if (!ipl->iplb_valid_pv) {
> +        return NULL;
> +    }
> +    return &ipl->iplb_pv;
> +}
> +
>  IplParameterBlock *s390_ipl_get_iplb(void)
>  {
>      S390IPLState *ipl = get_ipl_device();
> @@ -561,7 +601,8 @@ void s390_ipl_reset_request(CPUState *cs, enum s390_reset 
> reset_type)
>  {
>      S390IPLState *ipl = get_ipl_device();
>  
> -    if (reset_type == S390_RESET_EXTERNAL || reset_type == S390_RESET_REIPL) 
> {
> +    if (reset_type == S390_RESET_EXTERNAL || reset_type == S390_RESET_REIPL 
> ||
> +        reset_type == S390_RESET_PV) {
>          /* use CPU 0 for full resets */
>          ipl->reset_cpu_index = 0;
>      } else {
> diff --git a/hw/s390x/ipl.h b/hw/s390x/ipl.h
> index d4813105db..04be63cee1 100644
> --- a/hw/s390x/ipl.h
> +++ b/hw/s390x/ipl.h
> @@ -15,6 +15,24 @@
>  #include "cpu.h"
>  #include "hw/qdev-core.h"
>  
> +struct IPLBlockPVComp {
> +    uint64_t tweak_pref;
> +    uint64_t addr;
> +    uint64_t size;
> +} QEMU_PACKED;
> +typedef struct IPLBlockPVComp IPLBlockPVComp;
> +
> +struct IPLBlockPV {
> +    uint8_t  reserved[87];
> +    uint8_t  version;
> +    uint32_t reserved70;
> +    uint32_t num_comp;
> +    uint64_t pv_header_addr;
> +    uint64_t pv_header_len;
> +    struct IPLBlockPVComp components[];
> +} QEMU_PACKED;
> +typedef struct IPLBlockPV IPLBlockPV;
> +
>  struct IplBlockCcw {
>      uint8_t  reserved0[85];
>      uint8_t  ssid;
> @@ -71,6 +89,7 @@ union IplParameterBlock {
>          union {
>              IplBlockCcw ccw;
>              IplBlockFcp fcp;
> +            IPLBlockPV pv;
>              IplBlockQemuScsi scsi;
>          };
>      } QEMU_PACKED;
> @@ -84,9 +103,11 @@ union IplParameterBlock {
>  typedef union IplParameterBlock IplParameterBlock;
>  
>  int s390_ipl_set_loadparm(uint8_t *loadparm);
> +int s390_ipl_pv_check_components(IplParameterBlock *iplb);
>  void s390_ipl_update_diag308(IplParameterBlock *iplb);
>  void s390_ipl_prepare_cpu(S390CPU *cpu);
>  IplParameterBlock *s390_ipl_get_iplb(void);
> +IplParameterBlock *s390_ipl_get_iplb_secure(void);
>  
>  enum s390_reset {
>      /* default is a reset not triggered by a CPU e.g. issued by QMP */
> @@ -94,6 +115,7 @@ enum s390_reset {
>      S390_RESET_REIPL,
>      S390_RESET_MODIFIED_CLEAR,
>      S390_RESET_LOAD_NORMAL,
> +    S390_RESET_PV,
>  };
>  void s390_ipl_reset_request(CPUState *cs, enum s390_reset reset_type);
>  void s390_ipl_get_reset_request(CPUState **cs, enum s390_reset *reset_type);
> @@ -133,6 +155,7 @@ struct S390IPLState {
>      /*< private >*/
>      DeviceState parent_obj;
>      IplParameterBlock iplb;
> +    IplParameterBlock iplb_pv;
>      QemuIplParameters qipl;
>      uint64_t start_addr;
>      uint64_t compat_start_addr;
> @@ -140,6 +163,7 @@ struct S390IPLState {
>      uint64_t compat_bios_start_addr;
>      bool enforce_bios;
>      bool iplb_valid;
> +    bool iplb_valid_pv;
>      bool netboot;
>      /* reset related properties don't have to be migrated or reset */
>      enum s390_reset reset_type;
> @@ -161,9 +185,11 @@ QEMU_BUILD_BUG_MSG(offsetof(S390IPLState, iplb) & 3, 
> "alignment of iplb wrong");
>  
>  #define S390_IPL_TYPE_FCP 0x00
>  #define S390_IPL_TYPE_CCW 0x02
> +#define S390_IPL_TYPE_PV 0x05
>  #define S390_IPL_TYPE_QEMU_SCSI 0xff
>  
>  #define S390_IPLB_HEADER_LEN 8
> +#define S390_IPLB_MIN_PV_LEN 148
>  #define S390_IPLB_MIN_CCW_LEN 200
>  #define S390_IPLB_MIN_FCP_LEN 384
>  #define S390_IPLB_MIN_QEMU_SCSI_LEN 200
> @@ -185,4 +211,10 @@ static inline bool iplb_valid_fcp(IplParameterBlock 
> *iplb)
>             iplb->pbt == S390_IPL_TYPE_FCP;
>  }
>  
> +static inline bool iplb_valid_pv(IplParameterBlock *iplb)
> +{
> +    return be32_to_cpu(iplb->len) >= S390_IPLB_MIN_PV_LEN &&
> +           iplb->pbt == S390_IPL_TYPE_PV;
> +}
> +
>  #endif
> diff --git a/target/s390x/diag.c b/target/s390x/diag.c
> index b5aec06d6b..945b263f0a 100644
> --- a/target/s390x/diag.c
> +++ b/target/s390x/diag.c
> @@ -52,6 +52,7 @@ int handle_diag_288(CPUS390XState *env, uint64_t r1, 
> uint64_t r3)
>  #define DIAG_308_RC_OK              0x0001
>  #define DIAG_308_RC_NO_CONF         0x0102
>  #define DIAG_308_RC_INVALID         0x0402
> +#define DIAG_308_RC_NO_PV_CONF      0x0902
>  
>  #define DIAG308_RESET_MOD_CLR       0
>  #define DIAG308_RESET_LOAD_NORM     1
> @@ -59,6 +60,9 @@ int handle_diag_288(CPUS390XState *env, uint64_t r1, 
> uint64_t r3)
>  #define DIAG308_LOAD_NORMAL_DUMP    4
>  #define DIAG308_SET                 5
>  #define DIAG308_STORE               6
> +#define DIAG308_PV_SET              8
> +#define DIAG308_PV_STORE            9
> +#define DIAG308_PV_START            10
>  
>  static int diag308_parm_check(CPUS390XState *env, uint64_t r1, uint64_t addr,
>                                uintptr_t ra, bool write)
> @@ -105,6 +109,7 @@ void handle_diag_308(CPUS390XState *env, uint64_t r1, 
> uint64_t r3, uintptr_t ra)
>          s390_ipl_reset_request(cs, S390_RESET_REIPL);
>          break;
>      case DIAG308_SET:
> +    case DIAG308_PV_SET:
>          if (diag308_parm_check(env, r1, addr, ra, false)) {
>              return;
>          }
> @@ -117,7 +122,8 @@ void handle_diag_308(CPUS390XState *env, uint64_t r1, 
> uint64_t r3, uintptr_t ra)
>  
>          cpu_physical_memory_read(addr, iplb, be32_to_cpu(iplb->len));
>  
> -        if (!iplb_valid_ccw(iplb) && !iplb_valid_fcp(iplb)) {
> +        if (!iplb_valid_ccw(iplb) && !iplb_valid_fcp(iplb) &&
> +            !(iplb_valid_pv(iplb) && !s390_ipl_pv_check_components(iplb))) {
>              env->regs[r1 + 1] = DIAG_308_RC_INVALID;
>              goto out;
>          }
> @@ -128,17 +134,31 @@ out:
>          g_free(iplb);
>          return;
>      case DIAG308_STORE:
> +    case DIAG308_PV_STORE:
>          if (diag308_parm_check(env, r1, addr, ra, true)) {
>              return;
>          }
> -        iplb = s390_ipl_get_iplb();
> +        if (subcode == DIAG308_PV_STORE) {
> +            iplb = s390_ipl_get_iplb_secure();
> +        } else {
> +            iplb = s390_ipl_get_iplb();
> +        }
>          if (iplb) {
>              cpu_physical_memory_write(addr, iplb, be32_to_cpu(iplb->len));
>              env->regs[r1 + 1] = DIAG_308_RC_OK;
>          } else {
>              env->regs[r1 + 1] = DIAG_308_RC_NO_CONF;
>          }
> -        return;
> +        break;
> +    case DIAG308_PV_START:
> +        iplb = s390_ipl_get_iplb_secure();
> +        if (!iplb || !iplb_valid_pv(iplb)) {
> +            env->regs[r1 + 1] = DIAG_308_RC_NO_PV_CONF;
> +            return;
> +        }
> +
> +        s390_ipl_reset_request(cs, S390_RESET_PV);
> +        break;
>      default:
>          s390_program_interrupt(env, PGM_SPECIFICATION, ra);
>          break;
> 

Sorry, another comment. The new subcodes should be fenced via the cpu
model or similar. Applying this patch and triggering one of these
subcodes will end in a questionable state.

-- 
Thanks,

David / dhildenb




reply via email to

[Prev in Thread] Current Thread [Next in Thread]