[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v32 21/22] BootLinuxConsoleTest: Test the RX-Virt machine
From: |
Yoshinori Sato |
Subject: |
Re: [PATCH v32 21/22] BootLinuxConsoleTest: Test the RX-Virt machine |
Date: |
Mon, 09 Mar 2020 15:30:46 +0900 |
User-agent: |
Wanderlust/2.15.9 (Almost Unreal) SEMI-EPG/1.14.7 (Harue) FLIM/1.14.9 (Gojō) APEL/10.8 EasyPG/1.0.0 Emacs/26 (x86_64-pc-linux-gnu) MULE/6.0 (HANACHIRUSATO) |
On Mon, 09 Mar 2020 01:20:05 +0900,
Philippe Mathieu-Daudé wrote:
>
> On 2/24/20 3:19 PM, Yoshinori Sato wrote:
> > From: Philippe Mathieu-Daudé <address@hidden>
> >
> > Add two tests for the rx-virt machine, based on the recommended test
> > setup from Yoshinori Sato:
> > https://lists.gnu.org/archive/html/qemu-devel/2019-05/msg03586.html
> >
> > - U-Boot prompt
> > - Linux kernel with Sash shell
> >
> > These are very quick tests:
> >
> > $ avocado run -t arch:rx tests/acceptance/boot_linux_console.py
> > JOB ID : 84a6ef01c0b87975ecbfcb31a920afd735753ace
> > JOB LOG :
> > /home/phil/avocado/job-results/job-2019-05-24T05.02-84a6ef0/job.log
> > (1/2)
> > tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_rx_uboot: PASS
> > (0.11 s)
> > (2/2)
> > tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_rx_linux: PASS
> > (0.45 s)
> > RESULTS : PASS 2 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 |
> > CANCEL 0
> >
> > Tests can also be run with:
> >
> > $ avocado --show=console run -t arch:rx
> > tests/acceptance/boot_linux_console.py
> > console: U-Boot 2016.05-rc3-23705-ga1ef3c71cb-dirty (Feb 05 2019 -
> > 21:56:06 +0900)
> > console: Linux version 4.19.0+ (yo-satoh@yo-satoh-debian) (gcc version
> > 9.0.0 20181105 (experimental) (GCC)) #137 Wed Feb 20 23:20:02 JST 2019
> > console: Built 1 zonelists, mobility grouping on. Total pages: 8128
> > ...
> > console: SuperH (H)SCI(F) driver initialized
> > console: 88240.serial: ttySC0 at MMIO 0x88240 (irq = 215, base_baud = 0)
> > is a sci
> > console: console [ttySC0] enabled
> > console: 88248.serial: ttySC1 at MMIO 0x88248 (irq = 219, base_baud = 0)
> > is a sci
> >
> > Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
> > Based-on: address@hidden
> > "RX architecture support"
> > Signed-off-by: Yoshinori Sato <address@hidden>
> > ---
> > tests/acceptance/boot_linux_console.py | 46 ++++++++++++++++++++++++++
> > 1 file changed, 46 insertions(+)
> >
> > diff --git a/tests/acceptance/boot_linux_console.py
> > b/tests/acceptance/boot_linux_console.py
> > index 34d37eba3b..367cf480a5 100644
> > --- a/tests/acceptance/boot_linux_console.py
> > +++ b/tests/acceptance/boot_linux_console.py
> > @@ -686,3 +686,49 @@ class BootLinuxConsole(Test):
> > tar_hash = '49e88d9933742f0164b60839886c9739cb7a0d34'
> > self.vm.add_args('-cpu', 'dc233c')
> > self.do_test_advcal_2018('02', tar_hash, 'santas-sleigh-ride.elf')
> > +
> > + def test_rx_uboot(self):
> > + """
> > + :avocado: tags=arch:rx
> > + :avocado: tags=machine:rx-virt
> > + :avocado: tags=endian:little
> > + """
> > + uboot_url = ('https://acc.dl.osdn.jp/users/23/23888/u-boot.bin.gz')
> > + uboot_hash = '9b78dbd43b40b2526848c0b1ce9de02c24f4dcdb'
> > + uboot_path = self.fetch_asset(uboot_url, asset_hash=uboot_hash)
> > + uboot_path = archive.uncompress(uboot_path, self.workdir)
> > +
> > + self.vm.set_machine('rx-virt')
> > + self.vm.set_console()
> > + self.vm.add_args('-bios', uboot_path,
> > + '-no-reboot')
> > + self.vm.launch()
> > + uboot_version = 'U-Boot 2016.05-rc3-23705-ga1ef3c71cb-dirty'
> > + self.wait_for_console_pattern(uboot_version)
> > + gcc_version = 'rx-unknown-linux-gcc (GCC) 9.0.0 20181105
> > (experimental)'
> > + # FIXME limit baudrate on chardev, else we type too fast
> > + #self.exec_command_and_wait_for_pattern('version', gcc_version)
> > +
> > + def test_rx_linux(self):
> > + """
> > + :avocado: tags=arch:rx
> > + :avocado: tags=machine:rx-virt
> > + :avocado: tags=endian:little
> > + """
> > + dtb_url = ('https://acc.dl.osdn.jp/users/23/23887/rx-qemu.dtb')
>
> Sourceforge URL are not very stable, I'm now getting:
>
> HTTP request sent, awaiting response... 302 Found
> Location: https://osdn.dl.osdn.net/users/23/23887/rx-qemu.dtb [following]
> --2020-03-08 17:17:31-- https://osdn.dl.osdn.net/users/23/23887/rx-qemu.dtb
> Resolving osdn.dl.osdn.net (osdn.dl.osdn.net)... 202.221.179.23
> Connecting to osdn.dl.osdn.net
> (osdn.dl.osdn.net)|202.221.179.23|:443... connected.
> HTTP request sent, awaiting response... 404 Not Found
> 2020-03-08 17:17:32 ERROR 404: Not Found.
Permernet link is bellow.
https://osdn.net/users/ysato/pf/qemu/dl/u-boot.bin.gz
https://osdn.net/users/ysato/pf/qemu/dl/rx-virt.dtb
https://osdn.net/users/ysato/pf/qemu/dl/zImage
I was misunderstanding. sorry.
> > + dtb_hash = '7b4e4e2c71905da44e86ce47adee2210b026ac18'
> > + dtb_path = self.fetch_asset(dtb_url, asset_hash=dtb_hash)
> > + kernel_url = ('http://acc.dl.osdn.jp/users/23/23845/zImage')
> > + kernel_hash = '39a81067f8d72faad90866ddfefa19165d68fc99'
> > + kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash)
> > +
> > + self.vm.set_machine('rx-virt')
> > + self.vm.set_console()
> > + kernel_command_line = self.KERNEL_COMMON_COMMAND_LINE + 'earlycon'
> > + self.vm.add_args('-kernel', kernel_path,
> > + '-dtb', dtb_path,
> > + '-no-reboot')
> > + self.vm.launch()
> > + self.wait_for_console_pattern('Sash command shell (version 1.1.1)')
> > + self.exec_command_and_wait_for_pattern('printenv',
> > + 'TERM=linux')
> >
>
>
--
Yosinori Sato