qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [kvm-unit-tests PATCH v2 5/9] arm: pmu: Basic event counter Tests


From: Auger Eric
Subject: Re: [kvm-unit-tests PATCH v2 5/9] arm: pmu: Basic event counter Tests
Date: Thu, 12 Mar 2020 12:16:50 +0100
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Thunderbird/60.4.0

Hi Drew,

On 3/5/20 10:42 AM, Andrew Jones wrote:
> On Thu, Jan 30, 2020 at 12:25:06PM +0100, Eric Auger wrote:
>> Adds the following tests:
>> - event-counter-config: test event counter configuration
>> - basic-event-count:
>>   - programs counters #0 and #1 to count 2 required events
>>   (resp. CPU_CYCLES and INST_RETIRED). Counter #0 is preset
>>   to a value close enough to the 32b
>>   overflow limit so that we check the overflow bit is set
>>   after the execution of the asm loop.
>> - mem-access: counts MEM_ACCESS event on counters #0 and #1
>>   with and without 32-bit overflow.
>>
>> Signed-off-by: Eric Auger <address@hidden>
>>
>> ---
>>
>> v1 -> v2:
>> - fix PMCNTENSET_EL0 and PMCNTENCLR_EL0 op0
>> - print PMEVTYPER SH
>> - properly clobber used regs and add "cc"
>> - simplify mem_access_loop
>> ---
>>  arm/pmu.c         | 269 ++++++++++++++++++++++++++++++++++++++++++++++
>>  arm/unittests.cfg |  18 ++++
>>  2 files changed, 287 insertions(+)
>>
>> diff --git a/arm/pmu.c b/arm/pmu.c
>> index 4a26a76..1b0101f 100644
>> --- a/arm/pmu.c
>> +++ b/arm/pmu.c
>> @@ -18,9 +18,15 @@
>>  #include "asm/barrier.h"
>>  #include "asm/sysreg.h"
>>  #include "asm/processor.h"
>> +#include <bitops.h>
>> +#include <asm/gic.h>
>>  
>>  #define PMU_PMCR_E         (1 << 0)
>> +#define PMU_PMCR_P         (1 << 1)
>>  #define PMU_PMCR_C         (1 << 2)
>> +#define PMU_PMCR_D         (1 << 3)
>> +#define PMU_PMCR_X         (1 << 4)
>> +#define PMU_PMCR_DP        (1 << 5)
>>  #define PMU_PMCR_LC        (1 << 6)
>>  #define PMU_PMCR_N_SHIFT   11
>>  #define PMU_PMCR_N_MASK    0x1f
>> @@ -104,6 +110,9 @@ static inline void precise_instrs_loop(int loop, 
>> uint32_t pmcr)
>>  
>>  /* event counter tests only implemented for aarch64 */
>>  static void test_event_introspection(void) {}
>> +static void test_event_counter_config(void) {}
>> +static void test_basic_event_count(void) {}
>> +static void test_mem_access(void) {}
>>  
>>  #elif defined(__aarch64__)
>>  #define ID_AA64DFR0_PERFMON_SHIFT 8
>> @@ -145,6 +154,33 @@ static inline void precise_instrs_loop(int loop, 
>> uint32_t pmcr)
>>  }
>>  
>>  #define PMCEID1_EL0 sys_reg(3, 3, 9, 12, 7)
>> +#define PMCNTENSET_EL0 sys_reg(3, 3, 9, 12, 1)
>> +#define PMCNTENCLR_EL0 sys_reg(3, 3, 9, 12, 2)
>> +
>> +#define PMEVTYPER_EXCLUDE_EL1 (1 << 31)
>> +#define PMEVTYPER_EXCLUDE_EL0 (1 << 30)
>> +
>> +#define regn_el0(__reg, __n) __reg ## __n  ## _el0
>> +#define write_regn(__reg, __n, __val) \
>> +    write_sysreg((__val), __reg ## __n ## _el0)
>> +
>> +#define read_regn(__reg, __n) \
>> +    read_sysreg(__reg ## __n ## _el0)
>> +
>> +#define print_pmevtyper(__s, __n) do { \
>> +    uint32_t val; \
>> +    val = read_regn(pmevtyper, __n);\
>> +    report_info("%s pmevtyper%d=0x%x, eventcount=0x%x (p=%ld, u=%ld 
>> nsk=%ld, nsu=%ld, nsh=%ld m=%ld, mt=%ld, sh=%ld)", \
>> +                    (__s), (__n), val, val & 0xFFFF,        \
>> +                    (BIT_MASK(31) & val) >> 31,             \
>> +                    (BIT_MASK(30) & val) >> 30,             \
>> +                    (BIT_MASK(29) & val) >> 29,             \
>> +                    (BIT_MASK(28) & val) >> 28,             \
>> +                    (BIT_MASK(27) & val) >> 27,             \
>> +                    (BIT_MASK(26) & val) >> 26,             \
>> +                    (BIT_MASK(25) & val) >> 25);            \
>> +                    (BIT_MASK(24) & val) >> 24);            \
>> +    } while (0)
>>  
>>  static bool is_event_supported(uint32_t n, bool warn)
>>  {
>> @@ -198,6 +234,230 @@ static void test_event_introspection(void)
>>      report(required_events, "Check required events are implemented");
>>  }
>>  
>> +/*
>> + * Extra instructions inserted by the compiler would be difficult to 
>> compensate
>> + * for, so hand assemble everything between, and including, the PMCR 
>> accesses
>> + * to start and stop counting. isb instructions are inserted to make sure
>> + * pmccntr read after this function returns the exact instructions executed
>> + * in the controlled block. Loads @loop times the data at @address into x9.
>> + */
>> +static void mem_access_loop(void *addr, int loop, uint32_t pmcr)
>> +{
>> +asm volatile(
>> +    "       msr     pmcr_el0, %[pmcr]\n"
>> +    "       isb\n"
>> +    "       mov     x10, %[loop]\n"
>> +    "1:     sub     x10, x10, #1\n"
>> +    "       ldr x9, [%[addr]]\n"
>> +    "       cmp     x10, #0x0\n"
>> +    "       b.gt    1b\n"
>> +    "       msr     pmcr_el0, xzr\n"
>> +    "       isb\n"
>> +    :
>> +    : [addr] "r" (addr), [pmcr] "r" (pmcr), [loop] "r" (loop)
>> +    : "x9", "x10", "cc");
>> +}
>> +
>> +static void pmu_reset(void)
>> +{
>> +    /* reset all counters, counting disabled at PMCR level*/
>> +    set_pmcr(pmu.pmcr_ro | PMU_PMCR_LC | PMU_PMCR_C | PMU_PMCR_P);
>> +    /* Disable all counters */
>> +    write_sysreg_s(0xFFFFFFFF, PMCNTENCLR_EL0);
>> +    /* clear overflow reg */
>> +    write_sysreg(0xFFFFFFFF, pmovsclr_el0);
>> +    /* disable overflow interrupts on all counters */
>> +    write_sysreg(0xFFFFFFFF, pmintenclr_el1);
>> +    isb();
> 
> Is there a test we can do here to ensure the PMU was succesfully reset and
> assert if not? Reset is a critical part of each test prep, so we should be
> sure it has been done.
we can read the regs we have just written (?). In case the reset were to
fail, the subsequent test would fail anyway.

Thanks

Eric
> 
>> +}
>> +
>> +static void test_event_counter_config(void)
>> +{
>> +    int i;
>> +
>> +    if (!pmu.nb_implemented_counters) {
>> +            report_skip("No event counter, skip ...");
>> +            return;
>> +    }
>> +
>> +    pmu_reset();
>> +
>> +    /*
>> +     * Test setting through PMESELR/PMXEVTYPER and PMEVTYPERn read,
>> +     * select counter 0
>> +     */
>> +    write_sysreg(1, PMSELR_EL0);
>> +    /* program this counter to count unsupported event */
>> +    write_sysreg(0xEA, PMXEVTYPER_EL0);
>> +    write_sysreg(0xdeadbeef, PMXEVCNTR_EL0);
>> +    report((read_regn(pmevtyper, 1) & 0xFFF) == 0xEA,
>> +            "PMESELR/PMXEVTYPER/PMEVTYPERn");
>> +    report((read_regn(pmevcntr, 1) == 0xdeadbeef),
>> +            "PMESELR/PMXEVCNTR/PMEVCNTRn");
>> +
>> +    /* try to configure an unsupported event within the range [0x0, 0x3F] */
>> +    for (i = 0; i <= 0x3F; i++) {
>> +            if (!is_event_supported(i, false))
>> +                    break;
>> +    }
>> +    if (i > 0x3F) {
>> +            report_skip("pmevtyper: all events within [0x0, 0x3F] are 
>> supported");
>> +            return;
>> +    }
>> +
>> +    /* select counter 0 */
>> +    write_sysreg(0, PMSELR_EL0);
>> +    /* program this counter to count unsupported event */
>> +    write_sysreg(i, PMXEVCNTR_EL0);
>> +    /* read the counter value */
>> +    read_sysreg(PMXEVCNTR_EL0);
>> +    report(read_sysreg(PMXEVCNTR_EL0) == i,
>> +            "read of a counter programmed with unsupported event");
>> +
>> +}
>> +
>> +static bool satisfy_prerequisites(uint32_t *events, unsigned int nb_events)
>> +{
>> +    int i;
>> +
>> +    if (pmu.nb_implemented_counters < nb_events) {
>> +            report_skip("Skip test as number of counters is too small (%d)",
>> +                        pmu.nb_implemented_counters);
>> +            return false;
>> +    }
>> +
>> +    for (i = 0; i < nb_events; i++) {
>> +            if (!is_event_supported(events[i], false)) {
>> +                    report_skip("Skip test as event %d is not supported",
>> +                                events[i]);
>> +                    return false;
>> +            }
>> +    }
>> +    return true;
>> +}
>> +
>> +static void test_basic_event_count(void)
>> +{
>> +    uint32_t implemented_counter_mask, non_implemented_counter_mask;
>> +    uint32_t counter_mask;
>> +    uint32_t events[] = {
>> +            0x11,   /* CPU_CYCLES */
>> +            0x8,    /* INST_RETIRED */
>> +    };
>> +
>> +    if (!satisfy_prerequisites(events, ARRAY_SIZE(events)))
>> +            return;
>> +
>> +    implemented_counter_mask = BIT(pmu.nb_implemented_counters) - 1;
>> +    non_implemented_counter_mask = ~(BIT(31) | implemented_counter_mask);
>> +    counter_mask = implemented_counter_mask | non_implemented_counter_mask;
>> +
>> +    write_regn(pmevtyper, 0, events[0] | PMEVTYPER_EXCLUDE_EL0);
>> +    write_regn(pmevtyper, 1, events[1] | PMEVTYPER_EXCLUDE_EL0);
>> +
>> +    /* disable all counters */
>> +    write_sysreg_s(0xFFFFFFFF, PMCNTENCLR_EL0);
>> +    report(!read_sysreg_s(PMCNTENCLR_EL0) && !read_sysreg_s(PMCNTENSET_EL0),
>> +            "pmcntenclr: disable all counters");
>> +
>> +    /*
>> +     * clear cycle and all event counters and allow counter enablement
>> +     * through PMCNTENSET. LC is RES1.
>> +     */
>> +    set_pmcr(pmu.pmcr_ro | PMU_PMCR_LC | PMU_PMCR_C | PMU_PMCR_P);
>> +    isb();
>> +    report(get_pmcr() == (pmu.pmcr_ro | PMU_PMCR_LC), "pmcr: reset 
>> counters");
>> +
>> +    /* Preset counter #0 to 0xFFFFFFF0 to trigger an overflow interrupt */
>> +    write_regn(pmevcntr, 0, 0xFFFFFFF0);
>> +    report(read_regn(pmevcntr, 0) == 0xFFFFFFF0,
>> +            "counter #0 preset to 0xFFFFFFF0");
>> +    report(!read_regn(pmevcntr, 1), "counter #1 is 0");
>> +
>> +    /*
>> +     * Enable all implemented counters and also attempt to enable
>> +     * not supported counters. Counting still is disabled by !PMCR.E
>> +     */
>> +    write_sysreg_s(counter_mask, PMCNTENSET_EL0);
>> +
>> +    /* check only those implemented are enabled */
>> +    report((read_sysreg_s(PMCNTENSET_EL0) == read_sysreg_s(PMCNTENCLR_EL0)) 
>> &&
>> +            (read_sysreg_s(PMCNTENSET_EL0) == implemented_counter_mask),
>> +            "pmcntenset: enabled implemented_counters");
>> +
>> +    /* Disable all counters but counters #0 and #1 */
>> +    write_sysreg_s(~0x3, PMCNTENCLR_EL0);
>> +    report((read_sysreg_s(PMCNTENSET_EL0) == read_sysreg_s(PMCNTENCLR_EL0)) 
>> &&
>> +            (read_sysreg_s(PMCNTENSET_EL0) == 0x3),
>> +            "pmcntenset: just enabled #0 and #1");
>> +
>> +    /* clear overflow register */
>> +    write_sysreg(0xFFFFFFFF, pmovsclr_el0);
>> +    report(!read_sysreg(pmovsclr_el0), "check overflow reg is 0");
>> +
>> +    /* disable overflow interrupts on all counters*/
>> +    write_sysreg(0xFFFFFFFF, pmintenclr_el1);
>> +    report(!read_sysreg(pmintenclr_el1),
>> +            "pmintenclr_el1=0, all interrupts disabled");
>> +
>> +    /* enable overflow interrupts on all event counters */
>> +    write_sysreg(implemented_counter_mask | non_implemented_counter_mask,
>> +                 pmintenset_el1);
>> +    report(read_sysreg(pmintenset_el1) == implemented_counter_mask,
>> +            "overflow interrupts enabled on all implemented counters");
>> +
>> +    /* Set PMCR.E, execute asm code and unset PMCR.E */
>> +    precise_instrs_loop(20, pmu.pmcr_ro | PMU_PMCR_E);
>> +
>> +    report_info("counter #0 is 0x%lx (CPU_CYCLES)",
>> +                read_regn(pmevcntr, 0));
>> +    report_info("counter #1 is 0x%lx (INST_RETIRED)",
>> +                read_regn(pmevcntr, 1));
>> +
>> +    report_info("overflow reg = 0x%lx", read_sysreg(pmovsclr_el0));
>> +    report(read_sysreg(pmovsclr_el0) & 0x1,
>> +            "check overflow happened on #0 only");
>> +}
>> +
>> +static void test_mem_access(void)
>> +{
>> +    void *addr = malloc(PAGE_SIZE);
>> +    uint32_t events[] = {
>> +            0x13,   /* MEM_ACCESS */
>> +            0x13,   /* MEM_ACCESS */
>> +    };
>> +
>> +    if (!satisfy_prerequisites(events, ARRAY_SIZE(events)))
>> +            return;
>> +
>> +    pmu_reset();
>> +
>> +    write_regn(pmevtyper, 0, events[0] | PMEVTYPER_EXCLUDE_EL0);
>> +    write_regn(pmevtyper, 1, events[1] | PMEVTYPER_EXCLUDE_EL0);
>> +    write_sysreg_s(0x3, PMCNTENSET_EL0);
>> +    isb();
>> +    mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
>> +    report_info("counter #0 is %ld (MEM_ACCESS)", read_regn(pmevcntr, 0));
>> +    report_info("counter #1 is %ld (MEM_ACCESS)", read_regn(pmevcntr, 1));
>> +    /* We may measure more than 20 mem access depending on the core */
>> +    report((read_regn(pmevcntr, 0) == read_regn(pmevcntr, 1)) &&
>> +           (read_regn(pmevcntr, 0) >= 20) && !read_sysreg(pmovsclr_el0),
>> +           "Ran 20 mem accesses");
>> +
>> +    pmu_reset();
>> +
>> +    write_regn(pmevcntr, 0, 0xFFFFFFFA);
>> +    write_regn(pmevcntr, 1, 0xFFFFFFF0);
>> +    write_sysreg_s(0x3, PMCNTENSET_EL0);
>> +    isb();
>> +    mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
>> +    report(read_sysreg(pmovsclr_el0) == 0x3,
>> +           "Ran 20 mem accesses with expected overflows on both counters");
>> +    report_info("cnt#0 = %ld cnt#1=%ld overflow=0x%lx",
>> +                    read_regn(pmevcntr, 0), read_regn(pmevcntr, 1),
>> +                    read_sysreg(pmovsclr_el0));
>> +}
>> +
>>  #endif
>>  
>>  /*
>> @@ -388,6 +648,15 @@ int main(int argc, char *argv[])
>>      } else if (strcmp(argv[1], "event-introspection") == 0) {
>>              report_prefix_push(argv[1]);
>>              test_event_introspection();
>> +    } else if (strcmp(argv[1], "event-counter-config") == 0) {
>> +            report_prefix_push(argv[1]);
>> +            test_event_counter_config();
>> +    } else if (strcmp(argv[1], "basic-event-count") == 0) {
>> +            report_prefix_push(argv[1]);
>> +            test_basic_event_count();
>> +    } else if (strcmp(argv[1], "mem-access") == 0) {
>> +            report_prefix_push(argv[1]);
>> +            test_mem_access();
>>      } else {
>>              report_abort("Unknown sub-test '%s'", argv[1]);
>>      }
>> diff --git a/arm/unittests.cfg b/arm/unittests.cfg
>> index 4433ef3..7a59403 100644
>> --- a/arm/unittests.cfg
>> +++ b/arm/unittests.cfg
>> @@ -72,6 +72,24 @@ groups = pmu
>>  arch = arm64
>>  extra_params = -append 'event-introspection'
>>  
>> +[pmu-event-counter-config]
>> +file = pmu.flat
>> +groups = pmu
>> +arch = arm64
>> +extra_params = -append 'event-counter-config'
>> +
>> +[pmu-basic-event-count]
>> +file = pmu.flat
>> +groups = pmu
>> +arch = arm64
>> +extra_params = -append 'basic-event-count'
>> +
>> +[pmu-mem-access]
>> +file = pmu.flat
>> +groups = pmu
>> +arch = arm64
>> +extra_params = -append 'mem-access'
>> +
>>  # Test PMU support (TCG) with -icount IPC=1
>>  #[pmu-tcg-icount-1]
>>  #file = pmu.flat
>> -- 
>> 2.20.1
>>
>>




reply via email to

[Prev in Thread] Current Thread [Next in Thread]