[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH 6/6] acpi: parallel: don't use _STA method
From: |
Igor Mammedov |
Subject: |
Re: [PATCH 6/6] acpi: parallel: don't use _STA method |
Date: |
Fri, 27 Mar 2020 15:35:31 +0100 |
On Fri, 27 Mar 2020 13:11:11 +0100
Gerd Hoffmann <address@hidden> wrote:
> The _STA method dates back to the days where we had a static DSDT. The
> device is listed in the DSDT table unconditionally and the _STA method
> checks a bit in the isa bridge pci config space to figure whenever a
> given is isa device is present or not, then evaluates to 0x0f (present)
> or 0x00 (absent).
>
> These days the DSDT is generated by qemu anyway, so if a device is not
> present we can simply drop it from the DSDT instead.
>
> Signed-off-by: Gerd Hoffmann <address@hidden>
> ---
> hw/i386/acpi-build-pc.c | 29 ++++++++---------------------
> 1 file changed, 8 insertions(+), 21 deletions(-)
>
> diff --git a/hw/i386/acpi-build-pc.c b/hw/i386/acpi-build-pc.c
> index 97af5eac3d79..8bab105d5e44 100644
> --- a/hw/i386/acpi-build-pc.c
> +++ b/hw/i386/acpi-build-pc.c
> @@ -1169,39 +1169,26 @@ static Aml *build_mouse_device_aml(void)
> return dev;
> }
>
> -static Aml *build_lpt_device_aml(void)
> +static void build_lpt_device_aml(Aml *scope)
> {
> Aml *dev;
> Aml *crs;
> - Aml *method;
> - Aml *if_ctx;
> - Aml *else_ctx;
> - Aml *zero = aml_int(0);
> - Aml *is_present = aml_local(0);
> +
> + if (!memory_region_present(get_system_io(), 0x0378)) {
same comment as in 5/6 applies here
> + return;
> + }
>
> dev = aml_device("LPT");
> aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0400")));
>
> - method = aml_method("_STA", 0, AML_NOTSERIALIZED);
> - aml_append(method, aml_store(aml_name("LPEN"), is_present));
> - if_ctx = aml_if(aml_equal(is_present, zero));
> - {
> - aml_append(if_ctx, aml_return(aml_int(0x00)));
> - }
> - aml_append(method, if_ctx);
> - else_ctx = aml_else();
> - {
> - aml_append(else_ctx, aml_return(aml_int(0x0f)));
> - }
> - aml_append(method, else_ctx);
> - aml_append(dev, method);
> + aml_append(dev, aml_name_decl("_STA", aml_int(0xf)));
>
> crs = aml_resource_template();
> aml_append(crs, aml_io(AML_DECODE16, 0x0378, 0x0378, 0x08, 0x08));
> aml_append(crs, aml_irq_no_flags(7));
> aml_append(dev, aml_name_decl("_CRS", crs));
>
> - return dev;
> + aml_append(scope, dev);
> }
>
> static void build_com_device_aml(Aml *scope, uint8_t uid)
> @@ -1248,7 +1235,7 @@ static void build_isa_devices_aml(Aml *table)
> if (fdc) {
> aml_append(scope, build_fdc_device_aml(fdc));
> }
> - aml_append(scope, build_lpt_device_aml());
> + build_lpt_device_aml(scope);
> build_com_device_aml(scope, 1);
> build_com_device_aml(scope, 2);
>
- [PATCH 0/6] acpi: i386 tweaks, Gerd Hoffmann, 2020/03/27
- [PATCH 4/6] acpi: drop pointless _STA method, Gerd Hoffmann, 2020/03/27
- [PATCH 3/6] acpi: factor out acpi_dsdt_add_fw_cfg(), Gerd Hoffmann, 2020/03/27
- [PATCH 5/6] acpi: serial: don't use _STA method, Gerd Hoffmann, 2020/03/27
- [PATCH 2/6] acpi: make build_madt() more generic., Gerd Hoffmann, 2020/03/27
- [PATCH 6/6] acpi: parallel: don't use _STA method, Gerd Hoffmann, 2020/03/27
- Re: [PATCH 6/6] acpi: parallel: don't use _STA method,
Igor Mammedov <=
- [PATCH 1/6] acpi: split hw/i386/acpi-build.c, Gerd Hoffmann, 2020/03/27
- Re: [PATCH 0/6] acpi: i386 tweaks, no-reply, 2020/03/27
- Re: [PATCH 0/6] acpi: i386 tweaks, no-reply, 2020/03/27
- Re: [PATCH 0/6] acpi: i386 tweaks, Michael S. Tsirkin, 2020/03/29