[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [RFC v2 4/9] vhost-vdpa: introduce vhost-vdpa net client
|
From: |
Cindy Lu |
|
Subject: |
Re: [RFC v2 4/9] vhost-vdpa: introduce vhost-vdpa net client |
|
Date: |
Sat, 9 May 2020 15:31:28 +0800 |
On Sat, May 9, 2020 at 10:40 AM Jason Wang <address@hidden> wrote:
>
>
> On 2020/5/9 上午12:32, Cindy Lu wrote:
> > From: Tiwei Bie <address@hidden>
>
>
> If you think you've done a huge refactor on the code, you can change the
> author but need to keep the sob of Tiwei.
>
>
> >
> > This patch set introduces a new net client type: vhost-vdpa.
> > vhost-vdpa net client will set up a vDPA device which is specified
> > by a "vhostdev" parameter.
> >
> > Co-authored-by: Lingshan Zhu <address@hidden>
> > Signed-off-by: Cindy Lu <address@hidden>
> > ---
> > configure | 21 ++++
> > include/net/vhost-vdpa.h | 19 ++++
> > include/net/vhost_net.h | 1 +
>
>
> Patch 5 which is the infrastructure of vhost-vpda should come first.
> Please re-order the patch in next version.
>
Sure, Will fix this
>
> > net/Makefile.objs | 2 +-
> > net/clients.h | 2 +
> > net/net.c | 3 +
> > net/vhost-vdpa.c | 227 +++++++++++++++++++++++++++++++++++++++
> > qapi/net.json | 22 +++-
> > qemu-options.hx | 19 ++++
> > 9 files changed, 313 insertions(+), 3 deletions(-)
> > create mode 100644 include/net/vhost-vdpa.h
> > create mode 100644 net/vhost-vdpa.c
> >
> > diff --git a/configure b/configure
> > index 6099be1d84..bdd732e3bb 100755
> > --- a/configure
> > +++ b/configure
> > @@ -1505,6 +1505,10 @@ for opt do
> > ;;
> > --enable-vhost-user) vhost_user="yes"
> > ;;
> > + --disable-vhost-vdpa) vhost_vdpa="no"
> > + ;;
> > + --enable-vhost-vdpa) vhost_vdpa="yes"
> > + ;;
> > --disable-vhost-kernel) vhost_kernel="no"
> > ;;
> > --enable-vhost-kernel) vhost_kernel="yes"
> > @@ -1780,6 +1784,7 @@ disabled with --disable-FEATURE, default is enabled
> > if available:
> > vhost-crypto vhost-user-crypto backend support
> > vhost-kernel vhost kernel backend support
> > vhost-user vhost-user backend support
> > + vhost-vdpa vhost-vdpa backend support
>
>
> Maybe "vhost-vdpa kernel backend support" is better.
>
>
Will fix this
> > spice spice
> > rbd rados block device (rbd)
> > libiscsi iscsi support
> > @@ -2241,6 +2246,10 @@ test "$vhost_user" = "" && vhost_user=yes
> > if test "$vhost_user" = "yes" && test "$mingw32" = "yes"; then
> > error_exit "vhost-user isn't available on win32"
> > fi
> > +test "$vhost_vdpa" = "" && vhost_vdpa=yes
> > +if test "$vhost_vdpa" = "yes" && test "$mingw32" = "yes"; then
> > + error_exit "vhost-vdpa isn't available on win32"
> > +fi
>
>
> Let's add a check for Linux like vhost kernel below.
>
Will fix this
>
> > test "$vhost_kernel" = "" && vhost_kernel=$linux
> > if test "$vhost_kernel" = "yes" && test "$linux" != "yes"; then
> > error_exit "vhost-kernel is only available on Linux"
> > @@ -2269,6 +2278,11 @@ test "$vhost_user_fs" = "" &&
> > vhost_user_fs=$vhost_user
> > if test "$vhost_user_fs" = "yes" && test "$vhost_user" = "no"; then
> > error_exit "--enable-vhost-user-fs requires --enable-vhost-user"
> > fi
> > +#vhost-vdpa backends
> > +test "$vhost_net_vdpa" = "" && vhost_net_vdpa=$vhost_vdpa
> > +if test "$vhost_net_vdpa" = "yes" && test "$vhost_vdpa" = "no"; then
> > + error_exit "--enable-vhost-net-vdpa requires --enable-vhost-vdpa"
> > +fi
> >
> > # OR the vhost-kernel and vhost-user values for simplicity
> > if test "$vhost_net" = ""; then
> > @@ -6543,6 +6557,7 @@ echo "vhost-scsi support $vhost_scsi"
> > echo "vhost-vsock support $vhost_vsock"
> > echo "vhost-user support $vhost_user"
> > echo "vhost-user-fs support $vhost_user_fs"
> > +echo "vhost-vdpa support $vhost_vdpa"
> > echo "Trace backends $trace_backends"
> > if have_backend "simple"; then
> > echo "Trace output file $trace_file-<pid>"
> > @@ -7031,6 +7046,9 @@ fi
> > if test "$vhost_net_user" = "yes" ; then
> > echo "CONFIG_VHOST_NET_USER=y" >> $config_host_mak
> > fi
> > +if test "$vhost_net_vdpa" = "yes" ; then
> > + echo "CONFIG_VHOST_NET_VDPA=y" >> $config_host_mak
> > +fi
> > if test "$vhost_crypto" = "yes" ; then
> > echo "CONFIG_VHOST_CRYPTO=y" >> $config_host_mak
> > fi
> > @@ -7043,6 +7061,9 @@ fi
> > if test "$vhost_user" = "yes" ; then
> > echo "CONFIG_VHOST_USER=y" >> $config_host_mak
> > fi
> > +if test "$vhost_vdpa" = "yes" ; then
> > + echo "CONFIG_VHOST_VDPA=y" >> $config_host_mak
> > +fi
> > if test "$vhost_user_fs" = "yes" ; then
> > echo "CONFIG_VHOST_USER_FS=y" >> $config_host_mak
> > fi
> > diff --git a/include/net/vhost-vdpa.h b/include/net/vhost-vdpa.h
> > new file mode 100644
> > index 0000000000..6ce0d04f72
> > --- /dev/null
> > +++ b/include/net/vhost-vdpa.h
> > @@ -0,0 +1,19 @@
> > +/*
> > + * vhost-vdpa.h
> > + *
> > + * Copyright(c) 2017-2018 Intel Corporation.
> > + * Copyright(c) 2020 Red Hat, Inc.
> > + *
> > + * This work is licensed under the terms of the GNU GPL, version 2 or
> > later.
> > + * See the COPYING file in the top-level directory.
> > + *
> > + */
> > +
> > +#ifndef VHOST_VDPA_H
> > +#define VHOST_VDPA_H
> > +
> > +struct vhost_net;
> > +struct vhost_net *vhost_vdpa_get_vhost_net(NetClientState *nc);
> > +uint64_t vhost_vdpa_get_acked_features(NetClientState *nc);
> > +
> > +#endif /* VHOST_VDPA_H */
> > diff --git a/include/net/vhost_net.h b/include/net/vhost_net.h
> > index 6548a5a105..b47844bf29 100644
> > --- a/include/net/vhost_net.h
> > +++ b/include/net/vhost_net.h
> > @@ -40,4 +40,5 @@ uint64_t vhost_net_get_acked_features(VHostNetState *net);
> >
> > int vhost_net_set_mtu(struct vhost_net *net, uint16_t mtu);
> > int vhost_set_state(NetClientState *nc, uint8_t state);
> > +int vhost_net_get_device_id(struct vhost_net *net, uint32_t *device_id);
>
>
> Let's move this function to vhost-vdpa generic header instead of net.
>
Will fix this
>
> > #endif
> > diff --git a/net/Makefile.objs b/net/Makefile.objs
> > index c5d076d19c..5ab45545db 100644
> > --- a/net/Makefile.objs
> > +++ b/net/Makefile.objs
> > @@ -26,7 +26,7 @@ tap-obj-$(CONFIG_SOLARIS) = tap-solaris.o
> > tap-obj-y ?= tap-stub.o
> > common-obj-$(CONFIG_POSIX) += tap.o $(tap-obj-y)
> > common-obj-$(CONFIG_WIN32) += tap-win32.o
> > -
> > +common-obj-$(CONFIG_VHOST_NET_VDPA) += vhost-vdpa.o
> > vde.o-libs = $(VDE_LIBS)
> >
> > common-obj-$(CONFIG_CAN_BUS) += can/
> > diff --git a/net/clients.h b/net/clients.h
> > index a6ef267e19..92f9b59aed 100644
> > --- a/net/clients.h
> > +++ b/net/clients.h
> > @@ -61,4 +61,6 @@ int net_init_netmap(const Netdev *netdev, const char
> > *name,
> > int net_init_vhost_user(const Netdev *netdev, const char *name,
> > NetClientState *peer, Error **errp);
> >
> > +int net_init_vhost_vdpa(const Netdev *netdev, const char *name,
> > + NetClientState *peer, Error **errp);
> > #endif /* QEMU_NET_CLIENTS_H */
> > diff --git a/net/net.c b/net/net.c
> > index b3192deaf1..9eff1ae982 100644
> > --- a/net/net.c
> > +++ b/net/net.c
> > @@ -965,6 +965,9 @@ static int (* const
> > net_client_init_fun[NET_CLIENT_DRIVER__MAX])(
> > #ifdef CONFIG_VHOST_NET_USER
> > [NET_CLIENT_DRIVER_VHOST_USER] = net_init_vhost_user,
> > #endif
> > +#ifdef CONFIG_VHOST_NET_VDPA
> > + [NET_CLIENT_DRIVER_VHOST_VDPA] = net_init_vhost_vdpa,
> > +#endif
> > #ifdef CONFIG_L2TPV3
> > [NET_CLIENT_DRIVER_L2TPV3] = net_init_l2tpv3,
> > #endif
> > diff --git a/net/vhost-vdpa.c b/net/vhost-vdpa.c
> > new file mode 100644
> > index 0000000000..c29678fdf1
> > --- /dev/null
> > +++ b/net/vhost-vdpa.c
> > @@ -0,0 +1,227 @@
> > +/*
> > + * vhost-vdpa.c
> > + *
> > + * Copyright(c) 2017-2018 Intel Corporation.
> > + * Copyright(c) 2020 Red Hat, Inc.
> > + *
> > + * This work is licensed under the terms of the GNU GPL, version 2 or
> > later.
> > + * See the COPYING file in the top-level directory.
> > + *
> > + */
> > +
> > +#include "qemu/osdep.h"
> > +#include "clients.h"
> > +#include "net/vhost_net.h"
> > +#include "net/vhost-vdpa.h"
> > +#include "hw/virtio/vhost-vdpa.h"
> > +#include "qemu/config-file.h"
> > +#include "qemu/error-report.h"
> > +#include "qemu/option.h"
> > +#include "qapi/error.h"
> > +#include <linux/vfio.h>
>
>
> No need any more.
>
>
> > +#include <sys/ioctl.h>
> > +#include <err.h>
> > +#include <linux/virtio_net.h>
>
>
> That's not the way we include standard linux headers, qemu maintain a
> copy of standard linux headers.
>
> Need use #include "standard-headers/linux/xxx.h"
>
Will fix this
>
> > +#include "monitor/monitor.h"
> > +#include "qemu/sockets.h"
>
>
> Do we really need this?
>
Will fix this
>
> > +#include "hw/virtio/vhost.h"
> > +
> > +/* Todo:need to add the multiqueue support here */
> > +typedef struct VhostVDPAState {
> > + NetClientState nc;
> > + struct vhost_vdpa vhost_vdpa;
> > + VHostNetState *vhost_net;
> > + uint64_t acked_features;
> > + bool started;
> > +} VhostVDPAState;
> > +
> > +VHostNetState *vhost_vdpa_get_vhost_net(NetClientState *nc)
> > +{
> > + VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
> > + assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
> > + return s->vhost_net;
> > +}
> > +
> > +uint64_t vhost_vdpa_get_acked_features(NetClientState *nc)
> > +{
> > + VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
> > + assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
> > + return s->acked_features;
> > +}
> > +
> > +static void vhost_vdpa_del(NetClientState *ncs)
> > +{
> > + VhostVDPAState *s;
> > +
> > + assert(ncs->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
> > +
> > + s = DO_UPCAST(VhostVDPAState, nc, ncs);
> > +
> > + if (s->vhost_net) {
> > + /* save acked features */
> > + uint64_t features = vhost_net_get_acked_features(s->vhost_net);
> > + if (features) {
> > + s->acked_features = features;
> > + }
> > + vhost_net_cleanup(s->vhost_net);
> > + }
> > +}
> > +
> > +static int vhost_vdpa_add(NetClientState *ncs, void *be)
> > +{
> > + VhostNetOptions options;
> > + struct vhost_net *net = NULL;
> > + VhostVDPAState *s;
> > +
> > + options.backend_type = VHOST_BACKEND_TYPE_VDPA;
> > +
> > + assert(ncs->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
> > +
> > + s = DO_UPCAST(VhostVDPAState, nc, ncs);
> > +
> > + options.net_backend = ncs;
> > + options.opaque = be;
> > + options.busyloop_timeout = 0;
> > + net = vhost_net_init(&options);
> > + if (!net) {
> > + error_report("failed to init vhost_net for queue");
> > + goto err;
> > + }
> > +
> > + if (s->vhost_net) {
> > + vhost_net_cleanup(s->vhost_net);
> > + g_free(s->vhost_net);
> > + }
> > + s->vhost_net = net;
> > +
> > + return 0;
> > +
> > +err:
> > + if (net) {
> > + vhost_net_cleanup(net);
> > + }
> > + vhost_vdpa_del(ncs);
> > + return -1;
> > +}
> > +static void vhost_vdpa_cleanup(NetClientState *nc)
> > +{
> > + VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
> > +
> > + if (s->vhost_net) {
> > + vhost_net_cleanup(s->vhost_net);
> > + g_free(s->vhost_net);
> > + s->vhost_net = NULL;
> > + }
> > +
> > + qemu_purge_queued_packets(nc);
> > +}
> > +
> > +static bool vhost_vdpa_has_vnet_hdr(NetClientState *nc)
> > +{
> > + assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
> > +
> > + return true;
> > +}
> > +
> > +static bool vhost_vdpa_has_ufo(NetClientState *nc)
> > +{
> > + assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
> > + VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
> > + uint64_t features = 0;
> > +
> > + features |= (1ULL << VIRTIO_NET_F_HOST_UFO);
> > + features = vhost_net_get_features(s->vhost_net, features);
> > + return !!(features & (1ULL << VIRTIO_NET_F_HOST_UFO));
> > +
> > +}
> > +
> > +static int vhost_vdpa_check_device_id(NetClientState *nc)
> > +{
> > + uint32_t device_id;
> > + int ret;
> > + assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
> > + VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
> > + /* Get the device id from hw*/
> > + ret = vhost_net_get_device_id(s->vhost_net, &device_id);
> > + if (device_id != VIRTIO_ID_NET) {
> > + return -ENOTSUP;
> > + }
> > + return ret;
> > +}
> > +
> > +static NetClientInfo net_vhost_vdpa_info = {
> > + .type = NET_CLIENT_DRIVER_VHOST_VDPA,
> > + .size = sizeof(VhostVDPAState),
> > + .cleanup = vhost_vdpa_cleanup,
> > + .has_vnet_hdr = vhost_vdpa_has_vnet_hdr,
> > + .has_ufo = vhost_vdpa_has_ufo,
> > +};
> > +
> > +static int net_vhost_vdpa_init(NetClientState *peer, const char *device,
> > + const char *name, const char *vhostdev,
> > + bool has_fd, char *fd)
> > +{
> > + NetClientState *nc = NULL;
> > + VhostVDPAState *s;
> > + int vdpa_device_fd = -1;
> > + Error *err = NULL;
> > +
> > + assert(name);
> > +
> > + nc = qemu_new_net_client(&net_vhost_vdpa_info, peer, device, name);
> > + snprintf(nc->info_str, sizeof(nc->info_str), "vhost-vdpa");
> > + nc->queue_index = 0;
> > +
> > + s = DO_UPCAST(VhostVDPAState, nc, nc);
> > +
> > + if (has_fd) {
> > + vdpa_device_fd = monitor_fd_param(cur_mon, fd, &err);
> > + } else{
> > + vdpa_device_fd = open(vhostdev, O_RDWR);
> > + }
> > +
> > + if (vdpa_device_fd == -1) {
> > + return -errno;
> > + }
> > + s->vhost_vdpa.device_fd = vdpa_device_fd;
> > + vhost_vdpa_add(nc, (void *)&s->vhost_vdpa);
> > + assert(s->vhost_net);
> > + /* check the device id for vdpa */
> > + return vhost_vdpa_check_device_id(nc);
>
>
> We probably need to the check earlier. If we do things like this, we
> will probably leak vhost_device_fd.
>
there may have some problem to get this device id before the vdpa_add,
I will double check this and try to find a solution
>
> > +}
> > +
> > +static int net_vhost_check_net(void *opaque, QemuOpts *opts, Error **errp)
> > +{
> > + const char *name = opaque;
> > + const char *driver, *netdev;
> > +
> > + driver = qemu_opt_get(opts, "driver");
> > + netdev = qemu_opt_get(opts, "netdev");
> > + if (!driver || !netdev) {
> > + return 0;
> > + }
> > +
> > + if (strcmp(netdev, name) == 0 &&
> > + !g_str_has_prefix(driver, "virtio-net-")) {
> > + error_setg(errp, "vhost-vdpa requires frontend driver
> > virtio-net-*");
> > + return -1;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +int net_init_vhost_vdpa(const Netdev *netdev, const char *name,
> > + NetClientState *peer, Error **errp)
> > +{
> > + const NetdevVhostVDPAOptions *opts;
> > +
> > + assert(netdev->type == NET_CLIENT_DRIVER_VHOST_VDPA);
> > + opts = &netdev->u.vhost_vdpa;
> > + /* verify net frontend */
> > + if (qemu_opts_foreach(qemu_find_opts("device"), net_vhost_check_net,
> > + (char *)name, errp)) {
> > + return -1;
> > + }
> > + return net_vhost_vdpa_init(peer, "vhost_vdpa", name, opts->vhostdev,
> > + opts->has_fd, opts->fd);
> > +}
> > diff --git a/qapi/net.json b/qapi/net.json
> > index 335295be50..0f4fa6fffc 100644
> > --- a/qapi/net.json
> > +++ b/qapi/net.json
> > @@ -441,6 +441,23 @@
> > '*queues': 'int' } }
> >
> > ##
> > +# @NetdevVhostVDPAOptions:
> > +#
> > +# Vhost-vdpa network backend
> > +#
> > +# @vhostdev: name of a vdpa dev path in sysfs
> > +#
> > +# @queues: number of queues to be created for multiqueue vhost-vdpa
> > +# (default: 1) (Since 5.1)
> > +#
> > +# Since: 5.1
> > +##
> > +{ 'struct': 'NetdevVhostVDPAOptions',
> > + 'data': {
> > + '*vhostdev': 'str',
> > + '*fd': 'str',
> > + '*queues': 'int' } }
> > +##
> > # @NetClientDriver:
> > #
> > # Available netdev drivers.
> > @@ -451,7 +468,7 @@
> > ##
> > { 'enum': 'NetClientDriver',
> > 'data': [ 'none', 'nic', 'user', 'tap', 'l2tpv3', 'socket', 'vde',
> > - 'bridge', 'hubport', 'netmap', 'vhost-user' ] }
> > + 'bridge', 'hubport', 'netmap', 'vhost-user', 'vhost-vdpa' ] }
> >
> > ##
> > # @Netdev:
> > @@ -479,7 +496,8 @@
> > 'bridge': 'NetdevBridgeOptions',
> > 'hubport': 'NetdevHubPortOptions',
> > 'netmap': 'NetdevNetmapOptions',
> > - 'vhost-user': 'NetdevVhostUserOptions' } }
> > + 'vhost-user': 'NetdevVhostUserOptions',
> > + 'vhost-vdpa': 'NetdevVhostVDPAOptions' } }
> >
> > ##
> > # @NetLegacy:
> > diff --git a/qemu-options.hx b/qemu-options.hx
> > index 65c9473b73..08256d9d4e 100644
> > --- a/qemu-options.hx
> > +++ b/qemu-options.hx
> > @@ -2291,6 +2291,10 @@ DEF("netdev", HAS_ARG, QEMU_OPTION_netdev,
> > #ifdef CONFIG_POSIX
> > "-netdev vhost-user,id=str,chardev=dev[,vhostforce=on|off]\n"
> > " configure a vhost-user network, backed by a chardev
> > 'dev'\n"
> > +#endif
> > +#ifdef CONFIG_POSIX
> > + "-netdev vhost-vdpa,id=str,vhostdev=/path/to/dev\n"
> > + " configure a vhost-vdpa network, backed by a vhostdev
> > 'dev'\n"
> > #endif
> > "-netdev hubport,id=str,hubid=n[,netdev=nd]\n"
> > " configure a hub port on the hub with ID 'n'\n",
> > QEMU_ARCH_ALL)
> > @@ -2310,6 +2314,9 @@ DEF("nic", HAS_ARG, QEMU_OPTION_nic,
> > #endif
> > #ifdef CONFIG_POSIX
> > "vhost-user|"
> > +#endif
> > +#ifdef CONFIG_POSIX
> > + "vhost-vdpa|"
> > #endif
> > "socket][,option][,...][mac=macaddr]\n"
> > " initialize an on-board / default host NIC (using MAC
> > address\n"
> > @@ -2749,6 +2756,18 @@ qemu -m 512 -object
> > memory-backend-file,id=mem,size=512M,mem-path=/hugetlbfs,sha
> > -device virtio-net-pci,netdev=net0
> > @end example
> >
> > +@item -netdev vhost-vdpa,vhostdev=/path/to/dev
> > +Establish a vhost-vdpa netdev, backed by a vhostdev. The chardev should
> > +be a unix domain socket backed one.
>
>
> This seems wrong, we don't use unix domain socket.
>
> Thanks
>
Thanks Jason, will fix this
>
> > The vhost-vdpa uses a specifically defined
> > +protocol to pass vhost ioctl replacement messages to an application on the
> > other
> > +end of the socket.
> > +Example:
> > +@example
> > +qemu -m 512 -object
> > memory-backend-file,id=mem,size=512M,mem-path=/hugetlbfs,share=on \
> > + -numa node,memdev=mem \
> > + -netdev type=vhost-vdpa,id=net0,vhostdev=/path/to/dev \
> > + -device virtio-net-pci,netdev=net0
> > +@end example
> > @item -netdev hubport,id=@var{id},hubid=@var{hubid}[,netdev=@var{nd}]
> >
> > Create a hub port on the emulated hub with ID @var{hubid}.
>