[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH] ftgmac100: Implement variable descriptor size
From: |
Philippe Mathieu-Daudé |
Subject: |
Re: [PATCH] ftgmac100: Implement variable descriptor size |
Date: |
Wed, 3 Jun 2020 09:08:24 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.5.0 |
On 6/2/20 6:47 PM, Erik Smit wrote:
> The hardware supports variable descriptor sizes, configured with the DBLAC
> register.
>
> Most drivers use the default 2*8, which is currently hardcoded in qemu, but
> the implementation of the driver in Supermicro BMC SMT_X11_158 uses 4*8.
>
> --
> The implementation of the driver in Supermicro BMC SMT_X11_158 adds 4 extra
> 4-bytes entries:
> https://github.com/ya-mouse/openwrt-linux-aspeed/blob/master/drivers/net/ftgmac100_26.h#L387-L391
>
> And sets DBLAC to 0x44f97:
> https://github.com/ya-mouse/openwrt-linux-aspeed/blob/master/drivers/net/ftgmac100_26.c#L449
>
> There's not a lot of public documentation on this hardware, but the
> current linux driver shows the meaning of these registers:
>
> https://github.com/torvalds/linux/blob/master/drivers/net/ethernet/faraday/ftgmac100.c#L280-L281
>
> iowrite32(FTGMAC100_DBLAC_RXDES_SIZE(2) | /* 2*8 bytes RX descs */
> FTGMAC100_DBLAC_TXDES_SIZE(2) | /* 2*8 bytes TX descs */
>
> Without this patch, networking in SMT_X11_158 does not pass data.
Does it really 'pass' *all* the data?
This patch seems incomplete...
IMO you should 1/ declare FTGMAC100Desc as:
typedef struct {
uint32_t des0;
uint32_t des1;
} FTGMAC100Desc;
2/ Replace the code using static '2' by dynamic use of
FTGMAC100_DBLAC_xXDES_SIZE(dblac):
static int ftgmac100_read_bd(FTGMAC100Desc **bd, dma_addr_t addr)
{
unsigned bd_idx;
if (dma_memory_read(&address_space_memory, addr, bd, sizeof(*bd))) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: failed to read descriptor
@ 0x%"
HWADDR_PRIx "\n", __func__, addr);
return -1;
}
for (bd_idx = 0; bd_idx< FTGMAC100_DBLAC_RXDES_SIZE(s->dblac);
bd_idx++) {
bd[bd_idx]->des0 = le32_to_cpu(bd[bd_idx]->des0);
bd[bd_idx]->des1 = le32_to_cpu(bd[bd_idx]->des1);
}
return 0;
}
Etc...
Maybe worth introduce the bd_to_cpu()/cpu_to_bd() helpers too
(respectively calling le32_to_cpu & cpu_to_le32).
>
> Signed-off-by: Erik Smit <erik.lucas.smit@gmail.com
> <mailto:erik.lucas.smit@gmail.com>>
> ---
> hw/net/ftgmac100.c | 17 +++++++++++++++--
> 1 file changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/hw/net/ftgmac100.c b/hw/net/ftgmac100.c
> index 25ebee7ec2..1640b24b23 100644
> --- a/hw/net/ftgmac100.c
> +++ b/hw/net/ftgmac100.c
> @@ -79,6 +79,19 @@
> #define FTGMAC100_APTC_TXPOLL_CNT(x) (((x) >> 8) & 0xf)
> #define FTGMAC100_APTC_TXPOLL_TIME_SEL (1 << 12)
>
> +/*
> + * DMA burst length and arbitration control register
> + */
> +#define FTGMAC100_DBLAC_RXFIFO_LTHR(x) (((x) >> 0) & 0x7)
> +#define FTGMAC100_DBLAC_RXFIFO_HTHR(x) (((x) >> 3) & 0x7)
> +#define FTGMAC100_DBLAC_RX_THR_EN (1 << 6)
> +#define FTGMAC100_DBLAC_RXBURST_SIZE(x) (((x) >> 8) & 0x3)
> +#define FTGMAC100_DBLAC_TXBURST_SIZE(x) (((x) >> 10) & 0x3)
> +#define FTGMAC100_DBLAC_RXDES_SIZE(x) (((x) >> 12) & 0xf)
> +#define FTGMAC100_DBLAC_TXDES_SIZE(x) (((x) >> 16) & 0xf)
> +#define FTGMAC100_DBLAC_IFG_CNT(x) (((x) >> 20) & 0x7)
> +#define FTGMAC100_DBLAC_IFG_INC (1 << 23)
> +
> /*
> * PHY control register
> */
> @@ -553,7 +566,7 @@ static void ftgmac100_do_tx(FTGMAC100State *s,
> uint32_t tx_ring,
> if (bd.des0 & s->txdes0_edotr) {
> addr = tx_ring;
> } else {
> - addr += sizeof(FTGMAC100Desc);
> + addr += (FTGMAC100_DBLAC_TXDES_SIZE(s->dblac)) * 8;
Extra parenthesis not needed.
After doing 1/ you can now replace '8' by sizeof(FTGMAC100Desc).
> }
> }
>
> @@ -982,7 +995,7 @@ static ssize_t ftgmac100_receive(NetClientState *nc,
> const uint8_t *buf,
> if (bd.des0 & s->rxdes0_edorr) {
> addr = s->rx_ring;
> } else {
> - addr += sizeof(FTGMAC100Desc);
> + addr += (FTGMAC100_DBLAC_RXDES_SIZE(s->dblac)) * 8;
> }
> }
> s->rx_descriptor = addr;
> --
> 2.25.1