[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Bug 1879175] Re: GVTd not working (black screen) after upgrade to qemu-
From: |
Shak |
Subject: |
[Bug 1879175] Re: GVTd not working (black screen) after upgrade to qemu-5.0.0 |
Date: |
Tue, 09 Jun 2020 15:50:22 -0000 |
I've also posted the bug and fix here:
https://bugs.launchpad.net/qemu/+bug/1882784
I may be wrong but Legacy IGD assignment doesn't use GVT-g or GVT-d,
which is why I missed this ticket when reporting my own.
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1879175
Title:
GVTd not working (black screen) after upgrade to qemu-5.0.0
Status in QEMU:
New
Bug description:
Hi QEMU team,
=== Problem Summary ===
I have recently upgraded from QEMU-3.1.0 to to QEMU-5.0.0 on Debian
Unstable. Unfortunately GVTd (legacy passthrough of the integrated
intel gpu) stopped working correctly. The guest can still see and
loads the driver for the GPU, but the screen stays black.
The following is the version used:
$ /usr/bin/qemu-system-x86_64 --version
QEMU emulator version 5.0.0 (Debian 1:5.0-5)
Copyright (c) 2003-2020 Fabrice Bellard and the QEMU Project developers
=== Investigation/Triage done so far ===
Running QEMU with trace flags enabled shows the following behavior
change for the same VM (left: 3.1.0, right: 5.0.0):
vfio_realize (0000:00:02.0) group 1
vfio_realize (0000:00:02.0) group 1
vfio_listener_region_add_ram region_add [ram] 0x0 - 0xbffff [0x7f5b41e00000]
| vfio_listener_region_add_ram region_add [ram] 0x0 -
0xbffff [0x7f2bb1e00000]
vfio_listener_region_add_ram region_add [ram] 0xc0000 - 0xdffff
[0x7f5d1d400000] | vfio_listener_region_add_ram region_add
[ram] 0xc0000 - 0xdffff [0x7f2d7c800000]
vfio_listener_region_add_ram region_add [ram] 0xe0000 - 0xfffff
[0x7f5d1d620000] | vfio_listener_region_add_ram region_add
[ram] 0xe0000 - 0xfffff [0x7f2d84220000]
vfio_listener_region_add_ram region_add [ram] 0x100000 - 0xbfffffff
[0x7f5b41f00000] | vfio_listener_region_add_ram region_add
[ram] 0x100000 - 0xbfffffff [0x7f2bb1f00000]
vfio_listener_region_add_skip SKIPPING region_add 0xfec00000 - 0xfec00fff
vfio_listener_region_add_skip SKIPPING region_add
0xfec00000 - 0xfec00fff
vfio_listener_region_add_skip SKIPPING region_add 0xfee00000 - 0xfeefffff
vfio_listener_region_add_skip SKIPPING region_add
0xfee00000 - 0xfeefffff
vfio_listener_region_add_ram region_add [ram] 0xfffc0000 - 0xffffffff
[0x7f5d1d600000] | vfio_listener_region_add_ram region_add [ram]
0xfffc0000 - 0xffffffff [0x7f2d84200000]
vfio_listener_region_add_ram region_add [ram] 0x100000000 - 0x201ffffff
[0x7f5c01e00000] | vfio_listener_region_add_ram region_add [ram]
0x100000000 - 0x201ffffff [0x7f2c71e00000]
vfio_mdev (0000:00:02.0) is_mdev 0
vfio_mdev (0000:00:02.0) is_mdev 0
vfio_get_device Device 0000:00:02.0 flags: 3, regions: 12, irqs: 5
vfio_get_device Device 0000:00:02.0 flags: 3,
regions: 12, irqs: 5
vfio_region_setup Device 0000:00:02.0, region 0 "0000:00:02.0 BAR 0", flags:
0x7, offset: 0x0, s vfio_region_setup Device 0000:00:02.0, region 0
"0000:00:02.0 BAR 0", flags: 0x7, offset: 0x0, s
vfio_region_setup Device 0000:00:02.0, region 1 "0000:00:02.0 BAR 1", flags:
0x0, offset: 0x1000 vfio_region_setup Device 0000:00:02.0, region 1
"0000:00:02.0 BAR 1", flags: 0x0, offset: 0x1000
vfio_region_setup Device 0000:00:02.0, region 2 "0000:00:02.0 BAR 2", flags:
0x7, offset: 0x2000 vfio_region_setup Device 0000:00:02.0, region 2
"0000:00:02.0 BAR 2", flags: 0x7, offset: 0x2000
vfio_region_setup Device 0000:00:02.0, region 3 "0000:00:02.0 BAR 3", flags:
0x0, offset: 0x3000 vfio_region_setup Device 0000:00:02.0, region 3
"0000:00:02.0 BAR 3", flags: 0x0, offset: 0x3000
vfio_region_setup Device 0000:00:02.0, region 4 "0000:00:02.0 BAR 4", flags:
0x3, offset: 0x4000 vfio_region_setup Device 0000:00:02.0, region 4
"0000:00:02.0 BAR 4", flags: 0x3, offset: 0x4000
vfio_region_setup Device 0000:00:02.0, region 5 "0000:00:02.0 BAR 5", flags:
0x0, offset: 0x5000 vfio_region_setup Device 0000:00:02.0, region 5
"0000:00:02.0 BAR 5", flags: 0x0, offset: 0x5000
vfio_populate_device_config Device 0000:00:02.0 config:
vfio_populate_device_config Device 0000:00:02.0
config:
0x1000, offset: 0x70000000000, flags: 0x3
0x1000, offset: 0x70000000000, flags: 0x3
vfio_region_mmap Region 0000:00:02.0 BAR 0 mmaps[0] [0x0 - 0xffffff]
vfio_region_mmap Region 0000:00:02.0 BAR 0 mmaps[0]
[0x0 - 0xffffff]
vfio_region_mmap Region 0000:00:02.0 BAR 2 mmaps[0] [0x0 - 0xfffffff]
vfio_region_mmap Region 0000:00:02.0 BAR 2 mmaps[0]
[0x0 - 0xfffffff]
vfio_check_pm_reset 0000:00:02.0 Supports PM reset
vfio_check_pm_reset 0000:00:02.0 Supports PM reset
vfio_msi_setup 0000:00:02.0 PCI MSI CAP @0xac
vfio_msi_setup 0000:00:02.0 PCI MSI CAP @0xac
vfio_check_pcie_flr 0000:00:02.0 Supports FLR via PCIe cap
vfio_check_pcie_flr 0000:00:02.0 Supports FLR via
PCIe cap
vfio_get_dev_region 0000:00:02.0 index 9, 80008086/18
<
vfio_get_dev_region 0000:00:02.0 index 9, 80008086/18
<
vfio_get_dev_region 0000:00:02.0 index 10, 80008086/28
<
vfio_get_dev_region 0000:00:02.0 index 9, 80008086/18
<
vfio_get_dev_region 0000:00:02.0 index 10, 80008086/28
<
vfio_get_dev_region 0000:00:02.0 index 11, 80008086/38
<
vfio_listener_region_del region_del 0x0 - 0xbffff
<
vfio_listener_region_add_ram region_add [ram] 0x0 - 0x9ffff [0x7f5b41e00000]
<
vfio_listener_region_add_skip SKIPPING region_add 0xa0000 - 0xbffff
<
vfio_pci_igd_lpc_bridge_enabled 0000:00:02.0
<
vfio_pci_igd_host_bridge_enabled 0000:00:02.0
<
vfio_pci_igd_opregion_enabled 0000:00:02.0
<
vfio_pci_igd_bdsm_enabled 0000:00:02.0 40MB
<
vfio_intx_enable_kvm (0000:00:02.0) KVM INTx accel enabled
vfio_intx_enable_kvm (0000:00:02.0) KVM INTx accel
enabled
vfio_intx_enable (0000:00:02.0)
vfio_intx_enable (0000:00:02.0)
0x100, offset: 0x70000000000, flags: 0x3
0x100, offset: 0x70000000000, flags: 0x3
vfio_populate_device_get_irq_info_failure VFIO_DEVICE_GET_IRQ_INFO failure:
Invalid argument vfio_populate_device_get_irq_info_failure
VFIO_DEVICE_GET_IRQ_INFO failure: Invalid argument
vfio_pci_reset (0000:00:02.0)
vfio_pci_reset (0000:00:02.0)
vfio_intx_disable_kvm (0000:00:02.0) KVM INTx accel disabled
vfio_intx_disable_kvm (0000:00:02.0) KVM INTx accel
disabled
vfio_region_mmaps_set_enabled Region 0000:00:02.0 BAR 0 mmaps enabled: 1
vfio_region_mmaps_set_enabled Region 0000:00:02.0 BAR
0 mmaps enabled: 1
vfio_region_mmaps_set_enabled Region 0000:00:02.0 BAR 2 mmaps enabled: 1
vfio_region_mmaps_set_enabled Region 0000:00:02.0 BAR
2 mmaps enabled: 1
vfio_region_mmaps_set_enabled Region 0000:00:02.0 BAR 4 mmaps enabled: 1
vfio_region_mmaps_set_enabled Region 0000:00:02.0 BAR
4 mmaps enabled: 1
vfio_intx_disable (0000:00:02.0)
vfio_intx_disable (0000:00:02.0)
vfio_pci_write_config (0000:00:02.0, @0x4, 0x0, len=0x2)
vfio_pci_write_config (0000:00:02.0, @0x4, 0x0,
len=0x2)
vfio_listener_region_del region_del 0x0 - 0x9ffff
<
vfio_listener_region_del_skip SKIPPING region_del 0xa0000 - 0xbffff
<
vfio_listener_region_add_ram region_add [ram] 0x0 - 0xbffff [0x7f5b41e00000]
<
vfio_pci_reset_flr 0000:00:02.0 FLR/VFIO_DEVICE_RESET
vfio_pci_reset_flr 0000:00:02.0 FLR/VFIO_DEVICE_RESET
vfio_intx_enable (0000:00:02.0)
vfio_intx_enable (0000:00:02.0)
vfio_listener_region_del region_del 0x0 - 0xbffff
vfio_listener_region_del region_del 0x0 - 0xbffff
vfio_listener_region_del region_del 0xc0000 - 0xdffff
vfio_listener_region_del region_del 0xc0000 - 0xdffff
vfio_listener_region_del region_del 0xe0000 - 0xfffff
vfio_listener_region_del region_del 0xe0000 - 0xfffff
vfio_listener_region_del region_del 0x100000 - 0xbfffffff
vfio_listener_region_del region_del 0x100000 -
0xbfffffff
vfio_listener_region_add_ram region_add [ram] 0x0 - 0xcffff [0x7f5b41e00000]
| vfio_listener_region_add_ram region_add [ram] 0x0 -
0xcffff [0x7f2bb1e00000]
We can see here, the following key lines are not printed in 5.0.0:
vfio_pci_igd_lpc_bridge_enabled 0000:00:02.0
<
vfio_pci_igd_host_bridge_enabled 0000:00:02.0
<
vfio_pci_igd_opregion_enabled 0000:00:02.0
<
vfio_pci_igd_bdsm_enabled 0000:00:02.0 40MB
<
Looking through the code and bisecting the problem (I can provide more
detail if helpful), shows the following ifdef statement lines
introduce the problem:
https://github.com/qemu/qemu/blob/master/hw/vfio/pci-quirks.c#L1253
1246 void vfio_bar_quirk_setup(VFIOPCIDevice *vdev, int nr)
1247 {
1248 vfio_probe_ati_bar4_quirk(vdev, nr);
1249 vfio_probe_ati_bar2_quirk(vdev, nr);
1250 vfio_probe_nvidia_bar5_quirk(vdev, nr);
1251 vfio_probe_nvidia_bar0_quirk(vdev, nr);
1252 vfio_probe_rtl8168_bar2_quirk(vdev, nr);
1253 #ifdef CONFIG_VFIO_IGD
1254 vfio_probe_igd_bar4_quirk(vdev, nr);
1255 #endif
1256 }
This was added by the following commits:
https://github.com/qemu/qemu/commit/29d62771c81d8fd244a67c14a1d968c268d3fb19
#diff-38093e21794c7a4987feb71e498dbdc6
Reading through the commit message, I suspect the something may be
happening with the Kconfig switches mentioned there.
=== Validation/Workaround ===
I have rebuilt the package with the following two changes:
root@debian:/home/test/src# diff debian_*/qemu-5.0/hw/vfio/pci-quirks.c
0a1
> #define CONFIG_VFIO_IGD y
root@debian:/home/test/src# diff debian_*/qemu-5.0/hw/vfio/Kconfig
42c42
< default y if PC_PCI
---
> default y
root@debian:/home/test/src#
GVTd started working fine again (Screen shows output again).
I have tried with either change alone:
- with only the ifdef in pci-quirks.c compilation fails with linker errors
- with only the Kconfig it compiles, but GVTd still does not work (black
screen)
Please take a look and thank you very much for a fantastic product!
TheCatFelix
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1879175/+subscriptions
- [Bug 1879175] Re: GVTd not working (black screen) after upgrade to qemu-5.0.0,
Shak <=