[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Bug 1894818] [NEW] COLO's guest VNC client hang after failover
From: |
Derek Su |
Subject: |
Re: [Bug 1894818] [NEW] COLO's guest VNC client hang after failover |
Date: |
Tue, 08 Sep 2020 16:05:18 -0000 |
Hi, Lukas
It caused by the advanced watchdog (AWD) feature instead of COLO itself.
I will check it if my misuse or not, thanks.
Best regards,
Derek
Lukas Straub <1894818@bugs.launchpad.net> 於 2020年9月8日 週二 下午8:30寫道:
> On Tue, 08 Sep 2020 10:25:52 -0000
> Launchpad Bug Tracker <1894818@bugs.launchpad.net> wrote:
>
> > You have been subscribed to a public bug by Derek Su (dereksu):
> >
> > Hello,
> >
> > After setting up COLO's primary and secondary VMs,
> > I installed the vncserver and xrdp (apt install tightvncserver xrdp)
> inside the VM.
> >
> > I access the VM from another PC via VNC/RDP client, and everything is OK.
> > Then, kill the primary VM and issue the failover commands.
> >
> > The expected result is that the VNC/RDP client can reconnect and resume
> > automatically after failover. (I've confirmed the VNC/RDP client can
> > reconnect automatically.)
> >
> > But in my test, the VNC client's screen hangs and cannot be recovered no
> > longer. (I need to restart VNC client by myself.)
> >
> > BTW, it works well after killing SVM.
> >
> > Here is my QEMU networking device
> > ```
> > -device virtio-net-pci,id=e0,netdev=hn0 \
> > -netdev
> tap,id=hn0,br=br0,vhost=off,helper=/usr/local/libexec/qemu-bridge-helper \
> > ```
> >
> > Thanks.
> >
> > Regards,
> > Derek
> >
> > ** Affects: qemu
> > Importance: Undecided
> > Status: New
> >
>
> Hello,
> Can you show the full qemu command line?
>
> Regards,
> Lukas Straub
>
> --
> You received this bug notification because you are subscribed to the bug
> report.
> https://bugs.launchpad.net/bugs/1894818
>
> Title:
> COLO's guest VNC client hang after failover
>
> Status in QEMU:
> New
>
> Bug description:
> Hello,
>
> After setting up COLO's primary and secondary VMs,
> I installed the vncserver and xrdp (apt install tightvncserver xrdp)
> inside the VM.
>
> I access the VM from another PC via VNC/RDP client, and everything is OK.
> Then, kill the primary VM and issue the failover commands.
>
> The expected result is that the VNC/RDP client can reconnect and
> resume automatically after failover. (I've confirmed the VNC/RDP
> client can reconnect automatically.)
>
> But in my test, the VNC client's screen hangs and cannot be recovered
> no longer. I need to restart VNC client by myself.
>
> BTW, it works well after killing SVM.
>
> Here is my QEMU networking device
> ```
> -device virtio-net-pci,id=e0,netdev=hn0 \
> -netdev
> tap,id=hn0,br=br0,vhost=off,helper=/usr/local/libexec/qemu-bridge-helper \
> ```
>
> Thanks.
>
> Regards,
> Derek
>
> To manage notifications about this bug go to:
> https://bugs.launchpad.net/qemu/+bug/1894818/+subscriptions
>
** Changed in: qemu
Status: New => Invalid
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1894818
Title:
COLO's guest VNC client hang after failover
Status in QEMU:
Invalid
Bug description:
Hello,
After setting up COLO's primary and secondary VMs,
I installed the vncserver and xrdp (apt install tightvncserver xrdp) inside
the VM.
I access the VM from another PC via VNC/RDP client, and everything is OK.
Then, kill the primary VM and issue the failover commands.
The expected result is that the VNC/RDP client can reconnect and
resume automatically after failover. (I've confirmed the VNC/RDP
client can reconnect automatically.)
But in my test, the VNC client's screen hangs and cannot be recovered
no longer. I need to restart VNC client by myself.
BTW, it works well after killing SVM.
Here is my QEMU networking device
```
-device virtio-net-pci,id=e0,netdev=hn0 \
-netdev
tap,id=hn0,br=br0,vhost=off,helper=/usr/local/libexec/qemu-bridge-helper \
```
Thanks.
Regards,
Derek
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1894818/+subscriptions
- [Bug 1894818] [NEW] COLO's guest VNC client hang after failover, Derek Su, 2020/09/08
- [Bug 1894818] Re: COLO's guest VNC client hang after failover, Derek Su, 2020/09/08
- [Bug 1894818] Re: COLO's guest VNC client hang after failover, Derek Su, 2020/09/08
- Re: [Bug 1894818] [NEW] COLO's guest VNC client hang after failover, Lukas Straub, 2020/09/08
- Re: [Bug 1894818] [NEW] COLO's guest VNC client hang after failover,
Derek Su <=
- [Bug 1894818] Re: COLO's guest VNC client hang after failover, Derek Su, 2020/09/08
- [Bug 1894818] Re: COLO's guest VNC client hang after failover, Derek Su, 2020/09/08
- [Bug 1894818] Re: COLO's guest VNC client hang after failover, Derek Su, 2020/09/08