qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v2 1/3] hw/ssi/aspeed_smc: Rename 'max_slaves' variable as 'max_p


From: Philippe Mathieu-Daudé
Subject: [PATCH v2 1/3] hw/ssi/aspeed_smc: Rename 'max_slaves' variable as 'max_peripherals'
Date: Mon, 12 Oct 2020 14:49:53 +0200

From: Philippe Mathieu-Daudé <philmd@redhat.com>

In order to use inclusive terminology, rename max_slaves
as max_peripherals.

Patch generated using:

  $ sed -i s/slave/peripheral/ \
        hw/ssi/aspeed_smc.c include/hw/ssi/aspeed_smc.h

One line in aspeed_smc_read() has been manually tweaked
to pass checkpatch.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 include/hw/ssi/aspeed_smc.h |  2 +-
 hw/ssi/aspeed_smc.c         | 53 +++++++++++++++++++------------------
 2 files changed, 28 insertions(+), 27 deletions(-)

diff --git a/include/hw/ssi/aspeed_smc.h b/include/hw/ssi/aspeed_smc.h
index 3dd354b52ec..16c03fe64f3 100644
--- a/include/hw/ssi/aspeed_smc.h
+++ b/include/hw/ssi/aspeed_smc.h
@@ -43,7 +43,7 @@ typedef struct AspeedSMCController {
     uint8_t r_timings;
     uint8_t nregs_timings;
     uint8_t conf_enable_w0;
-    uint8_t max_slaves;
+    uint8_t max_peripherals;
     const AspeedSegments *segments;
     hwaddr flash_window_base;
     uint32_t flash_window_size;
diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c
index 795784e5f36..2780cac71d2 100644
--- a/hw/ssi/aspeed_smc.c
+++ b/hw/ssi/aspeed_smc.c
@@ -181,7 +181,7 @@
 #define SNOOP_START       0x0
 
 /*
- * Default segments mapping addresses and size for each slave per
+ * Default segments mapping addresses and size for each peripheral per
  * controller. These can be changed when board is initialized with the
  * Segment Address Registers.
  */
@@ -259,7 +259,7 @@ static const AspeedSMCController controllers[] = {
         .r_timings         = R_TIMINGS,
         .nregs_timings     = 1,
         .conf_enable_w0    = CONF_ENABLE_W0,
-        .max_slaves        = 1,
+        .max_peripherals   = 1,
         .segments          = aspeed_segments_legacy,
         .flash_window_base = ASPEED_SOC_SMC_FLASH_BASE,
         .flash_window_size = 0x6000000,
@@ -275,7 +275,7 @@ static const AspeedSMCController controllers[] = {
         .r_timings         = R_TIMINGS,
         .nregs_timings     = 1,
         .conf_enable_w0    = CONF_ENABLE_W0,
-        .max_slaves        = 5,
+        .max_peripherals   = 5,
         .segments          = aspeed_segments_fmc,
         .flash_window_base = ASPEED_SOC_FMC_FLASH_BASE,
         .flash_window_size = 0x10000000,
@@ -293,7 +293,7 @@ static const AspeedSMCController controllers[] = {
         .r_timings         = R_SPI_TIMINGS,
         .nregs_timings     = 1,
         .conf_enable_w0    = SPI_CONF_ENABLE_W0,
-        .max_slaves        = 1,
+        .max_peripherals   = 1,
         .segments          = aspeed_segments_spi,
         .flash_window_base = ASPEED_SOC_SPI_FLASH_BASE,
         .flash_window_size = 0x10000000,
@@ -309,7 +309,7 @@ static const AspeedSMCController controllers[] = {
         .r_timings         = R_TIMINGS,
         .nregs_timings     = 1,
         .conf_enable_w0    = CONF_ENABLE_W0,
-        .max_slaves        = 3,
+        .max_peripherals   = 3,
         .segments          = aspeed_segments_ast2500_fmc,
         .flash_window_base = ASPEED_SOC_FMC_FLASH_BASE,
         .flash_window_size = 0x10000000,
@@ -327,7 +327,7 @@ static const AspeedSMCController controllers[] = {
         .r_timings         = R_TIMINGS,
         .nregs_timings     = 1,
         .conf_enable_w0    = CONF_ENABLE_W0,
-        .max_slaves        = 2,
+        .max_peripherals   = 2,
         .segments          = aspeed_segments_ast2500_spi1,
         .flash_window_base = ASPEED_SOC_SPI_FLASH_BASE,
         .flash_window_size = 0x8000000,
@@ -343,7 +343,7 @@ static const AspeedSMCController controllers[] = {
         .r_timings         = R_TIMINGS,
         .nregs_timings     = 1,
         .conf_enable_w0    = CONF_ENABLE_W0,
-        .max_slaves        = 2,
+        .max_peripherals   = 2,
         .segments          = aspeed_segments_ast2500_spi2,
         .flash_window_base = ASPEED_SOC_SPI2_FLASH_BASE,
         .flash_window_size = 0x8000000,
@@ -359,7 +359,7 @@ static const AspeedSMCController controllers[] = {
         .r_timings         = R_TIMINGS,
         .nregs_timings     = 1,
         .conf_enable_w0    = CONF_ENABLE_W0,
-        .max_slaves        = 3,
+        .max_peripherals   = 3,
         .segments          = aspeed_segments_ast2600_fmc,
         .flash_window_base = ASPEED26_SOC_FMC_FLASH_BASE,
         .flash_window_size = 0x10000000,
@@ -377,7 +377,7 @@ static const AspeedSMCController controllers[] = {
         .r_timings         = R_TIMINGS,
         .nregs_timings     = 2,
         .conf_enable_w0    = CONF_ENABLE_W0,
-        .max_slaves        = 2,
+        .max_peripherals   = 2,
         .segments          = aspeed_segments_ast2600_spi1,
         .flash_window_base = ASPEED26_SOC_SPI_FLASH_BASE,
         .flash_window_size = 0x10000000,
@@ -395,7 +395,7 @@ static const AspeedSMCController controllers[] = {
         .r_timings         = R_TIMINGS,
         .nregs_timings     = 3,
         .conf_enable_w0    = CONF_ENABLE_W0,
-        .max_slaves        = 3,
+        .max_peripherals   = 3,
         .segments          = aspeed_segments_ast2600_spi2,
         .flash_window_base = ASPEED26_SOC_SPI2_FLASH_BASE,
         .flash_window_size = 0x10000000,
@@ -410,7 +410,7 @@ static const AspeedSMCController controllers[] = {
 
 /*
  * The Segment Registers of the AST2400 and AST2500 have a 8MB
- * unit. The address range of a flash SPI slave is encoded with
+ * unit. The address range of a flash SPI peripheral is encoded with
  * absolute addresses which should be part of the overall controller
  * window.
  */
@@ -432,7 +432,7 @@ static void aspeed_smc_reg_to_segment(const AspeedSMCState 
*s,
 
 /*
  * The Segment Registers of the AST2600 have a 1MB unit. The address
- * range of a flash SPI slave is encoded with offsets in the overall
+ * range of a flash SPI peripheral is encoded with offsets in the overall
  * controller window. The previous SoC AST2400 and AST2500 used
  * absolute addresses. Only bits [27:20] are relevant and the end
  * address is an upper bound limit.
@@ -476,7 +476,7 @@ static bool aspeed_smc_flash_overlap(const AspeedSMCState 
*s,
     AspeedSegments seg;
     int i;
 
-    for (i = 0; i < s->ctrl->max_slaves; i++) {
+    for (i = 0; i < s->ctrl->max_peripherals; i++) {
         if (i == cs) {
             continue;
         }
@@ -537,7 +537,7 @@ static void aspeed_smc_flash_set_segment(AspeedSMCState *s, 
int cs,
      */
     if ((s->ctrl->segments == aspeed_segments_ast2500_spi1 ||
          s->ctrl->segments == aspeed_segments_ast2500_spi2) &&
-        cs == s->ctrl->max_slaves &&
+        cs == s->ctrl->max_peripherals &&
         seg.addr + seg.size != s->ctrl->segments[cs].addr +
         s->ctrl->segments[cs].size) {
         qemu_log_mask(LOG_GUEST_ERROR,
@@ -941,14 +941,14 @@ static void aspeed_smc_reset(DeviceState *d)
 
     memset(s->regs, 0, sizeof s->regs);
 
-    /* Unselect all slaves */
+    /* Unselect all peripherals */
     for (i = 0; i < s->num_cs; ++i) {
         s->regs[s->r_ctrl0 + i] |= CTRL_CE_STOP_ACTIVE;
         qemu_set_irq(s->cs_lines[i], true);
     }
 
     /* setup the default segment register values and regions for all */
-    for (i = 0; i < s->ctrl->max_slaves; ++i) {
+    for (i = 0; i < s->ctrl->max_peripherals; ++i) {
         aspeed_smc_flash_set_segment_region(s, i,
                     s->ctrl->segment_to_reg(s, &s->ctrl->segments[i]));
     }
@@ -995,8 +995,9 @@ static uint64_t aspeed_smc_read(void *opaque, hwaddr addr, 
unsigned int size)
         (s->ctrl->has_dma && addr == R_DMA_DRAM_ADDR) ||
         (s->ctrl->has_dma && addr == R_DMA_LEN) ||
         (s->ctrl->has_dma && addr == R_DMA_CHECKSUM) ||
-        (addr >= R_SEG_ADDR0 && addr < R_SEG_ADDR0 + s->ctrl->max_slaves) ||
-        (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + s->ctrl->max_slaves)) {
+        (addr >= R_SEG_ADDR0 &&
+         addr < R_SEG_ADDR0 + s->ctrl->max_peripherals) ||
+        (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + s->ctrl->max_peripherals)) {
 
         trace_aspeed_smc_read(addr, size, s->regs[addr]);
 
@@ -1270,7 +1271,7 @@ static void aspeed_smc_write(void *opaque, hwaddr addr, 
uint64_t data,
         int cs = addr - s->r_ctrl0;
         aspeed_smc_flash_update_ctrl(&s->flashes[cs], value);
     } else if (addr >= R_SEG_ADDR0 &&
-               addr < R_SEG_ADDR0 + s->ctrl->max_slaves) {
+               addr < R_SEG_ADDR0 + s->ctrl->max_peripherals) {
         int cs = addr - R_SEG_ADDR0;
 
         if (value != s->regs[R_SEG_ADDR0 + cs]) {
@@ -1341,10 +1342,10 @@ static void aspeed_smc_realize(DeviceState *dev, Error 
**errp)
     s->conf_enable_w0 = s->ctrl->conf_enable_w0;
 
     /* Enforce some real HW limits */
-    if (s->num_cs > s->ctrl->max_slaves) {
+    if (s->num_cs > s->ctrl->max_peripherals) {
         qemu_log_mask(LOG_GUEST_ERROR, "%s: num_cs cannot exceed: %d\n",
-                      __func__, s->ctrl->max_slaves);
-        s->num_cs = s->ctrl->max_slaves;
+                      __func__, s->ctrl->max_peripherals);
+        s->num_cs = s->ctrl->max_peripherals;
     }
 
     /* DMA irq. Keep it first for the initialization in the SoC */
@@ -1352,7 +1353,7 @@ static void aspeed_smc_realize(DeviceState *dev, Error 
**errp)
 
     s->spi = ssi_create_bus(dev, "spi");
 
-    /* Setup cs_lines for slaves */
+    /* Setup cs_lines for peripherals */
     s->cs_lines = g_new0(qemu_irq, s->num_cs);
 
     for (i = 0; i < s->num_cs; ++i) {
@@ -1376,16 +1377,16 @@ static void aspeed_smc_realize(DeviceState *dev, Error 
**errp)
                           s->ctrl->flash_window_size);
     sysbus_init_mmio(sbd, &s->mmio_flash);
 
-    s->flashes = g_new0(AspeedSMCFlash, s->ctrl->max_slaves);
+    s->flashes = g_new0(AspeedSMCFlash, s->ctrl->max_peripherals);
 
     /*
-     * Let's create a sub memory region for each possible slave. All
+     * Let's create a sub memory region for each possible peripheral. All
      * have a configurable memory segment in the overall flash mapping
      * window of the controller but, there is not necessarily a flash
      * module behind to handle the memory accesses. This depends on
      * the board configuration.
      */
-    for (i = 0; i < s->ctrl->max_slaves; ++i) {
+    for (i = 0; i < s->ctrl->max_peripherals; ++i) {
         AspeedSMCFlash *fl = &s->flashes[i];
 
         snprintf(name, sizeof(name), "%s.%d", s->ctrl->name, i);
-- 
2.26.2




reply via email to

[Prev in Thread] Current Thread [Next in Thread]