[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [RFC PATCH v7 2/2] hw/misc/sifive_u_otp: Add backend drive support
From: |
Bin Meng |
Subject: |
Re: [RFC PATCH v7 2/2] hw/misc/sifive_u_otp: Add backend drive support |
Date: |
Thu, 15 Oct 2020 16:01:27 +0800 |
On Thu, Oct 15, 2020 at 12:15 PM Green Wan <green.wan@sifive.com> wrote:
>
> Add '-drive' support to OTP device. Allow users to assign a raw file
> as OTP image.
>
> test commands for 16k otp.img filled with zero:
>
> $ dd if=/dev/zero of=./otp.img bs=1k count=16
> $ ./qemu-system-riscv64 -M sifive_u -m 256M -nographic -bios none \
> -kernel ../opensbi/build/platform/sifive/fu540/firmware/fw_payload.elf \
> -d guest_errors -drive if=none,format=raw,file=otp.img
>
> Signed-off-by: Green Wan <green.wan@sifive.com>
> ---
> hw/misc/sifive_u_otp.c | 67 +++++++++++++++++++++++++++++++++-
> include/hw/misc/sifive_u_otp.h | 2 +
> 2 files changed, 68 insertions(+), 1 deletion(-)
>
> diff --git a/hw/misc/sifive_u_otp.c b/hw/misc/sifive_u_otp.c
> index 565eec082f..60066375ab 100644
> --- a/hw/misc/sifive_u_otp.c
> +++ b/hw/misc/sifive_u_otp.c
> @@ -19,11 +19,14 @@
> */
>
> #include "qemu/osdep.h"
> +#include "qapi/error.h"
> #include "hw/qdev-properties.h"
> #include "hw/sysbus.h"
> #include "qemu/log.h"
> #include "qemu/module.h"
> #include "hw/misc/sifive_u_otp.h"
> +#include "sysemu/blockdev.h"
> +#include "sysemu/block-backend.h"
>
> #define WRITTEN_BIT_ON 0x1
>
> @@ -54,6 +57,16 @@ static uint64_t sifive_u_otp_read(void *opaque, hwaddr
> addr, unsigned int size)
> if ((s->pce & SIFIVE_U_OTP_PCE_EN) &&
> (s->pdstb & SIFIVE_U_OTP_PDSTB_EN) &&
> (s->ptrim & SIFIVE_U_OTP_PTRIM_EN)) {
> +
> + /* read from backend */
> + if (s->blk) {
> + int32_t buf;
> +
> + blk_pread(s->blk, s->pa * SIFIVE_U_OTP_FUSE_WORD, &buf,
> + SIFIVE_U_OTP_FUSE_WORD);
> + return buf;
> + }
> +
> return s->fuse[s->pa & SIFIVE_U_OTP_PA_MASK];
> } else {
> return 0xff;
> @@ -137,7 +150,7 @@ static void sifive_u_otp_write(void *opaque, hwaddr addr,
> if (s->pwe && !s->pas) {
> if (GET_FUSEARRAY_BIT(s->fuse_wo, s->pa, s->paio)) {
> qemu_log_mask(LOG_GUEST_ERROR,
> - "Error: write idx<%u>, bit<%u>\n",
> + "write once error: idx<%u>, bit<%u>\n",
This should be in the patch 1.
> s->pa, s->paio);
> break;
> }
> @@ -145,6 +158,12 @@ static void sifive_u_otp_write(void *opaque, hwaddr addr,
> /* write bit data */
> SET_FUSEARRAY_BIT(s->fuse, s->pa, s->paio, s->pdin);
>
> + /* write to backend */
> + if (s->blk) {
> + blk_pwrite(s->blk, s->pa * SIFIVE_U_OTP_FUSE_WORD,
> + &s->fuse[s->pa], SIFIVE_U_OTP_FUSE_WORD, 0);
> + }
> +
> /* update written bit */
> SET_FUSEARRAY_BIT(s->fuse_wo, s->pa, s->paio, WRITTEN_BIT_ON);
> }
> @@ -168,16 +187,48 @@ static const MemoryRegionOps sifive_u_otp_ops = {
>
> static Property sifive_u_otp_properties[] = {
> DEFINE_PROP_UINT32("serial", SiFiveUOTPState, serial, 0),
> + DEFINE_PROP_DRIVE("drive", SiFiveUOTPState, blk),
> DEFINE_PROP_END_OF_LIST(),
> };
>
Otherwise,
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
You can drop the "RFC" tag in the next version.