Re: [RESEND PATCH 2/9] hw/riscv: microchip_pfsoc: Connect DDR memory controller modules

[Bin Meng]

Hi Alistair,

On Wed, Oct 28, 2020 at 1:49 AM Alistair Francis <alistair23@gmail.com> wrote:
>
> On Tue, Oct 27, 2020 at 7:46 AM Bin Meng <bmeng.cn@gmail.com> wrote:
> >
> > From: Bin Meng <bin.meng@windriver.com>
> >
> > Connect DDR SGMII PHY module and CFG module to the PolarFire SoC.
> >
> > Signed-off-by: Bin Meng <bin.meng@windriver.com>
> > ---
> >
> >  hw/riscv/Kconfig                   |  1 +
> >  hw/riscv/microchip_pfsoc.c         | 18 ++++++++++++++++++
> >  include/hw/riscv/microchip_pfsoc.h |  5 +++++
> >  3 files changed, 24 insertions(+)
> >
> > diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
> > index 2df978fe8d..c8e50bde99 100644
> > --- a/hw/riscv/Kconfig
> > +++ b/hw/riscv/Kconfig
> > @@ -4,6 +4,7 @@ config IBEX
> >  config MICROCHIP_PFSOC
> >      bool
> >      select CADENCE_SDHCI
> > +    select MCHP_PFSOC_DMC
> >      select MCHP_PFSOC_MMUART
> >      select MSI_NONBROKEN
> >      select SIFIVE_CLINT
> > diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c
> > index 4627179cd3..85be2bcde8 100644
> > --- a/hw/riscv/microchip_pfsoc.c
> > +++ b/hw/riscv/microchip_pfsoc.c
> > @@ -15,6 +15,7 @@
> >   * 4) Cadence eMMC/SDHC controller and an SD card connected to it
> >   * 5) SiFive Platform DMA (Direct Memory Access Controller)
> >   * 6) GEM (Gigabit Ethernet MAC Controller)
> > + * 7) DMC (DDR Memory Controller)
> >   *
> >   * This board currently generates devicetree dynamically that indicates at 
> > least
> >   * two harts and up to five harts.
> > @@ -85,7 +86,9 @@ static const struct MemmapEntry {
> >      [MICROCHIP_PFSOC_MMUART0] =         { 0x20000000,     0x1000 },
> >      [MICROCHIP_PFSOC_SYSREG] =          { 0x20002000,     0x2000 },
> >      [MICROCHIP_PFSOC_MPUCFG] =          { 0x20005000,     0x1000 },
> > +    [MICROCHIP_PFSOC_DDR_SGMII_PHY] =   { 0x20007000,     0x1000 },
> >      [MICROCHIP_PFSOC_EMMC_SD] =         { 0x20008000,     0x1000 },
> > +    [MICROCHIP_PFSOC_DDR_CFG] =         { 0x20080000,    0x40000 },
>
> Neither of these are documented....

It's documented in the "Register
Map/PF_SoC_RegMap_V1_1/pfsoc_regmap.htm" in
https://www.microsemi.com/document-portal/doc_download/1244581-polarfire-soc-register-map

>
> Maybe just add a single comment above the memory layout clarifying
> that this is not what is documented from the SoC but is instead based
> on what guests do?
>

I can add a link to the Microchip website that documents the memory
map above the memory layout.

> It seems to be a constant problem with this board, unless I am really
> misreading the memory map.
>

Regards,
Bin