[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH] pci: check bus pointer before dereference
From: |
Fam Zheng |
Subject: |
Re: [PATCH] pci: check bus pointer before dereference |
Date: |
Fri, 30 Oct 2020 10:50:28 +0000 |
On Fri, 2020-10-30 at 05:01 -0400, Michael S. Tsirkin wrote:
> On Wed, Sep 30, 2020 at 10:32:42AM +0530, P J P wrote:
> >
> > [+Paolo, +Fam Zheng - for scsi]
> >
> > +-- On Mon, 28 Sep 2020, P J P wrote --+
> > > +-- On Wed, 16 Sep 2020, Peter Maydell wrote --+
> > > > On Wed, 16 Sep 2020 at 07:28, P J P <ppandit@redhat.com> wrote:
> > > > > ->
> > > > > https://ruhr-uni-bochum.sciebo.de/s/NNWP2GfwzYKeKwE?path=%2Flsi_nullptr1
> > > > > ==1183858==Hint: address points to the zero page.
> > > > > #0 pci_change_irq_level hw/pci/pci.c:259
> > > > > #1 pci_irq_handler hw/pci/pci.c:1445
> > > > > #2 pci_set_irq hw/pci/pci.c:1463
> > > > > #3 lsi_set_irq hw/scsi/lsi53c895a.c:488
> > > > > #4 lsi_update_irq hw/scsi/lsi53c895a.c:523
> > > > > #5 lsi_script_scsi_interrupt hw/scsi/lsi53c895a.c:554
> > > > > #6 lsi_execute_script hw/scsi/lsi53c895a.c:1149
> > > > > #7 lsi_reg_writeb hw/scsi/lsi53c895a.c:1984
> > > > > #8 lsi_io_write hw/scsi/lsi53c895a.c:2146
> > >
> > > ...
> > > > Generally we don't bother to assert() that pointers that
> > > > shouldn't be NULL
> > > > really are NULL immediately before dereferencing them, because
> > > > the
> > > > dereference provides an equally easy-to-debug crash to the
> > > > assert, and so
> > > > the assert doesn't provide anything extra. assert()ing that a
> > > > pointer is
> > > > non-NULL is more useful if it is done in a place that
> > > > identifies the problem
> > > > at an earlier and easier-to-debug point in execution rather
> > > > than at a later
> > > > point which is distantly removed from the place where the bogus
> > > > pointer was
> > > > introduced.
> > >
> > > * The NULL dereference above occurs because the 'pci_dev->qdev-
> > > >parent_bus'
> > > address gets overwritten (with 0x0) during scsi 'Memory Move'
> > > operation in
> > >
> > > ../hw/scsi/lsi53c895a.c
> > > #define LSI_BUF_SIZE 4096
> > >
> > > lsi_mmio_write
> > > lsi_reg_writeb
> > > lsi_execute_script
> > > static void lsi_memcpy(LSIState *s, ... int count=12MB)
> > > {
> > > int n;
> > > uint8_t buf[LSI_BUF_SIZE];
> > >
> > > while (count) {
> > > n = (count > LSI_BUF_SIZE) ? LSI_BUF_SIZE : count;
> > > lsi_mem_read(s, src, buf, n); <== read from DMA
> > > memory
> > > lsi_mem_write(s, dest, buf, n); <== write to I/O
> > > memory
> > > src += n;
> > > dest += n;
> > > count -= n;
> > > }
> > > }
> > > ->
> > > https://www.manualslib.com/manual/1407578/Lsi-Lsi53c895a.html?page=254#manual
> > >
> > > * Above loop moves data between DMA memory to i/o address space.
> > >
> > > * Going through the manual above, it seems 'Memory Move' can move
> > > upto 16MB of
> > > data between memory spaces.
> > >
> > > * I tried to see a suitable fix, but couldn't get one.
> > >
> > > - Limiting 'count' value does not seem right, as allowed value
> > > is upto 16MB.
> > >
> > > - Manual above talks about moving data via 'dma_buf'. But it
> > > doesn't seem to
> > > be used here.
> > >
> > > * During above loop, 'dest' address moves past its 'MemoryRegion
> > > mr' and
> > > overwrites the adjacent 'mr' memory area, overwritting
> > > 'parent_bus' value.
I agree with Igor, I don't understand how pci_dma_rw writing into the
next mr can cause the NULL pointer. parent_bus is in the QEMU heap, but
mr is backed by different ram areas, protected with boundary check.
Is there a backtrace at the corruption time?
Fam