[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [RFC PATCH v3 05/31] hw/cxl/device: Implement basic mailbox (8.2.8.4
|
From: |
Ben Widawsky |
|
Subject: |
Re: [RFC PATCH v3 05/31] hw/cxl/device: Implement basic mailbox (8.2.8.4) |
|
Date: |
Wed, 17 Feb 2021 16:55:14 -0800 |
On 21-02-11 17:46:39, Jonathan Cameron wrote:
> On Tue, 2 Feb 2021 14:58:30 +0000
> Jonathan Cameron <Jonathan.Cameron@Huawei.com> wrote:
>
> > On Mon, 1 Feb 2021 16:59:22 -0800
> > Ben Widawsky <ben.widawsky@intel.com> wrote:
> >
> > > This is the beginning of implementing mailbox support for CXL 2.0
> > > devices. The implementation recognizes when the doorbell is rung,
> > > handles the command/payload, clears the doorbell while returning error
> > > codes and data.
> > >
> > > Generally the mailbox mechanism is designed to permit communication
> > > between the host OS and the firmware running on the device. For our
> > > purposes, we emulate both the firmware, implemented primarily in
> > > cxl-mailbox-utils.c, and the hardware.
> > >
> > > No commands are implemented yet.
> > >
> > > Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
> > > ---
> > > hw/cxl/cxl-device-utils.c | 125 ++++++++++++++++++++++-
> > > hw/cxl/cxl-mailbox-utils.c | 197 ++++++++++++++++++++++++++++++++++++
> > > hw/cxl/meson.build | 1 +
> > > include/hw/cxl/cxl.h | 3 +
> > > include/hw/cxl/cxl_device.h | 28 ++++-
> > > 5 files changed, 349 insertions(+), 5 deletions(-)
> > > create mode 100644 hw/cxl/cxl-mailbox-utils.c
> > >
> > > diff --git a/hw/cxl/cxl-device-utils.c b/hw/cxl/cxl-device-utils.c
> > > index bb15ad9a0f..6602606f3d 100644
> > > --- a/hw/cxl/cxl-device-utils.c
> > > +++ b/hw/cxl/cxl-device-utils.c
> > > @@ -40,6 +40,111 @@ static uint64_t dev_reg_read(void *opaque, hwaddr
> > > offset, unsigned size)
> > > return 0;
> > > }
> > >
> > > +static uint64_t mailbox_reg_read(void *opaque, hwaddr offset, unsigned
> > > size)
> > > +{
> > > + CXLDeviceState *cxl_dstate = opaque;
> > > +
> > > + switch (size) {
>
> As per the thread on the linux driver and the infinite loop I saw there
> as a result of doing 1 byte reads.
>
> With the current setup of min_access_size = 4 and this
> function QEMU will helpfully issue a series of unaligned 4 byte
> reads to this function. It will then mask those down to 1 byte each
> and combine them. Given the integer division that results in
> the bottom byte of offset / 4 being returned up to 4 times.
>
> To handle 2 and 1 byte reads we need explicit support in here and
> the MemoryRegionOps need to reflect that as well.
>
> All the similar cases where such reads are allowed need to do the
> same.
>
>From the documentation (memory.rst)
- .impl.min_access_size, .impl.max_access_size define the access sizes
(in bytes) supported by the *implementation*; other access sizes will be
emulated using the ones available. For example a 4-byte write will be
emulated using four 1-byte writes, if .impl.max_access_size = 1.
I'm intentionally not looking at the implementation. As I read this, the
behavior you describe is either a QEMU bug, or poor documentation.
Am I missing something?
> > > + case 8:
> > > + return cxl_dstate->mbox_reg_state64[offset / 8];
> > > + case 4:
> > > + return cxl_dstate->mbox_reg_state32[offset / 4];
> >
> > Numeric order seems more natural and I can't see a reason not to do it.
> > + you do them in that order below.
> >
> > > + default:
> > > + g_assert_not_reached();
> > > + }
> > > +}
> > > +
> > > +static void mailbox_mem_writel(uint32_t *reg_state, hwaddr offset,
> > > + uint64_t value)
> > > +{
> > > + switch (offset) {
> > > + case A_CXL_DEV_MAILBOX_CTRL:
> > > + /* fallthrough */
> > > + case A_CXL_DEV_MAILBOX_CAP:
> > > + /* RO register */
> > > + break;
> > > + default:
> > > + qemu_log_mask(LOG_UNIMP,
> > > + "%s Unexpected 32-bit access to 0x%" PRIx64 "
> > > (WI)\n",
> > > + __func__, offset);
> > > + break;
> > > + }
> > > +
> > > + reg_state[offset / 4] = value;
> > > +}
> > > +
> > > +static void mailbox_mem_writeq(uint64_t *reg_state, hwaddr offset,
> > > + uint64_t value)
> > > +{
> > > + switch (offset) {
> > > + case A_CXL_DEV_MAILBOX_CMD:
> > > + break;
> > > + case A_CXL_DEV_BG_CMD_STS:
> > > + /* BG not supported */
> > > + /* fallthrough */
> > > + case A_CXL_DEV_MAILBOX_STS:
> > > + /* Read only register, will get updated by the state machine */
> > > + return;
> > > + default:
> > > + qemu_log_mask(LOG_UNIMP,
> > > + "%s Unexpected 64-bit access to 0x%" PRIx64 "
> > > (WI)\n",
> > > + __func__, offset);
> > > + return;
> > > + }
> > > +
> > > +
> > > + reg_state[offset / 8] = value;
> > > +}
> > > +
> > > +static void mailbox_reg_write(void *opaque, hwaddr offset, uint64_t
> > > value,
> > > + unsigned size)
> > > +{
> > > + CXLDeviceState *cxl_dstate = opaque;
> > > +
> > > + if (offset >= A_CXL_DEV_CMD_PAYLOAD) {
> > > + memcpy(cxl_dstate->mbox_reg_state + offset, &value, size);
> > > + return;
> > > + }
> > > +
> > > + /*
> > > + * Lock is needed to prevent concurrent writes as well as to prevent
> > > writes
> > > + * coming in while the firmware is processing. Without background
> > > commands
> > > + * or the second mailbox implemented, this serves no purpose since
> > > the
> > > + * memory access is synchronized at a higher level (per memory
> > > region).
> > > + */
> > > + RCU_READ_LOCK_GUARD();
> > > +
> > > + switch (size) {
> > > + case 4:
> > > + mailbox_mem_writel(cxl_dstate->mbox_reg_state32, offset, value);
> > > + break;
> > > + case 8:
> > > + mailbox_mem_writeq(cxl_dstate->mbox_reg_state64, offset, value);
> > > + break;
> > > + default:
> > > + g_assert_not_reached();
> > > + }
> > > +
> > > + if (ARRAY_FIELD_EX32(cxl_dstate->mbox_reg_state32,
> > > CXL_DEV_MAILBOX_CTRL,
> > > + DOORBELL))
> > > + cxl_process_mailbox(cxl_dstate);
> > > +}
> > > +
> > > +static const MemoryRegionOps mailbox_ops = {
> > > + .read = mailbox_reg_read,
> > > + .write = mailbox_reg_write,
> > > + .endianness = DEVICE_LITTLE_ENDIAN,
> > > + .valid = {
> > > + .min_access_size = 1,
> > > + .max_access_size = 8,
> > > + .unaligned = false,
> > > + },
> > > + .impl = {
> > > + .min_access_size = 4,
> > > + .max_access_size = 8,
> > > + },
> > > +};
> > > +
> > > static const MemoryRegionOps dev_ops = {
> > > .read = dev_reg_read,
> > > .write = NULL, /* status register is read only */
> > > @@ -80,20 +185,33 @@ void cxl_device_register_block_init(Object *obj,
> > > CXLDeviceState *cxl_dstate)
> > > "cap-array", CXL_DEVICE_REGISTERS_OFFSET - 0);
> > > memory_region_init_io(&cxl_dstate->device, obj, &dev_ops, cxl_dstate,
> > > "device-status", CXL_DEVICE_REGISTERS_LENGTH);
> > > + memory_region_init_io(&cxl_dstate->mailbox, obj, &mailbox_ops,
> > > cxl_dstate,
> > > + "mailbox", CXL_MAILBOX_REGISTERS_LENGTH);
> > >
> > > memory_region_add_subregion(&cxl_dstate->device_registers, 0,
> > > &cxl_dstate->caps);
> > > memory_region_add_subregion(&cxl_dstate->device_registers,
> > > CXL_DEVICE_REGISTERS_OFFSET,
> > > &cxl_dstate->device);
> > > + memory_region_add_subregion(&cxl_dstate->device_registers,
> > > + CXL_MAILBOX_REGISTERS_OFFSET,
> > > + &cxl_dstate->mailbox);
> > > }
> > >
> > > static void device_reg_init_common(CXLDeviceState *cxl_dstate) { }
> > >
> > > +static void mailbox_reg_init_common(CXLDeviceState *cxl_dstate)
> > > +{
> > > + /* 2048 payload size, with no interrupt or background support */
> > > + ARRAY_FIELD_DP32(cxl_dstate->mbox_reg_state32, CXL_DEV_MAILBOX_CAP,
> > > + PAYLOAD_SIZE, CXL_MAILBOX_PAYLOAD_SHIFT);
> > > + cxl_dstate->payload_size = CXL_MAILBOX_MAX_PAYLOAD_SIZE;
> > > +}
> > > +
> > > void cxl_device_register_init_common(CXLDeviceState *cxl_dstate)
> > > {
> > > uint32_t *cap_hdrs = cxl_dstate->caps_reg_state32;
> > > - const int cap_count = 1;
> > > + const int cap_count = 2;
> > >
> > > /* CXL Device Capabilities Array Register */
> > > ARRAY_FIELD_DP32(cap_hdrs, CXL_DEV_CAP_ARRAY, CAP_ID, 0);
> > > @@ -102,4 +220,9 @@ void cxl_device_register_init_common(CXLDeviceState
> > > *cxl_dstate)
> > >
> > > cxl_device_cap_init(cxl_dstate, DEVICE, 1);
> > > device_reg_init_common(cxl_dstate);
> > > +
> > > + cxl_device_cap_init(cxl_dstate, MAILBOX, 2);
> > > + mailbox_reg_init_common(cxl_dstate);
> > > +
> > > + assert(cxl_initialize_mailbox(cxl_dstate) == 0);
> > > }
> > > diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
> > > new file mode 100644
> > > index 0000000000..466055b01a
> > > --- /dev/null
> > > +++ b/hw/cxl/cxl-mailbox-utils.c
> > > @@ -0,0 +1,197 @@
> > > +/*
> > > + * CXL Utility library for mailbox interface
> > > + *
> > > + * Copyright(C) 2020 Intel Corporation.
> > > + *
> > > + * This work is licensed under the terms of the GNU GPL, version 2. See
> > > the
> > > + * COPYING file in the top-level directory.
> > > + */
> > > +
> > > +#include "qemu/osdep.h"
> > > +#include "hw/cxl/cxl.h"
> > > +#include "hw/pci/pci.h"
> > > +#include "qemu/log.h"
> > > +#include "qemu/uuid.h"
> > > +
> > > +/*
> > > + * How to add a new command, example. The command set FOO, with cmd BAR.
> > > + * 1. Add the command set and cmd to the enum.
> > > + * FOO = 0x7f,
> > > + * #define BAR 0
> > > + * 2. Forward declare the handler.
> > > + * declare_mailbox_handler(FOO_BAR);
> > > + * 3. Add the command to the cxl_cmd_set[][]
> > > + * CXL_CMD(FOO, BAR, 0, 0),
> > > + * 4. Implement your handler
> > > + * define_mailbox_handler(FOO_BAR) { ... return CXL_MBOX_SUCCESS; }
> > > + *
> > > + *
> > > + * Writing the handler:
> > > + * The handler will provide the &struct cxl_cmd, the &CXLDeviceState,
> > > and the
> > > + * in/out length of the payload. The handler is responsible for
> > > consuming the
> > > + * payload from cmd->payload and operating upon it as necessary. It
> > > must then
> > > + * fill the output data into cmd->payload (overwriting what was
> > > there),
> > > + * setting the length, and returning a valid return code.
> > > + *
> > > + * XXX: The handler need not worry about endianess. The payload is read
> > > out of
> > > + * a register interface that already deals with it.
> > > + */
> > > +
> > > +/* 8.2.8.4.5.1 Command Return Codes */
> > > +typedef enum {
> > > + CXL_MBOX_SUCCESS = 0x0,
> > > + CXL_MBOX_BG_STARTED = 0x1,
> > > + CXL_MBOX_INVALID_INPUT = 0x2,
> > > + CXL_MBOX_UNSUPPORTED = 0x3,
> > > + CXL_MBOX_INTERNAL_ERROR = 0x4,
> > > + CXL_MBOX_RETRY_REQUIRED = 0x5,
> > > + CXL_MBOX_BUSY = 0x6,
> > > + CXL_MBOX_MEDIA_DISABLED = 0x7,
> > > + CXL_MBOX_FW_XFER_IN_PROGRESS = 0x8,
> > > + CXL_MBOX_FW_XFER_OUT_OF_ORDER = 0x9,
> > > + CXL_MBOX_FW_AUTH_FAILED = 0xa,
> > > + CXL_MBOX_FW_INVALID_SLOT = 0xb,
> > > + CXL_MBOX_FW_ROLLEDBACK = 0xc,
> > > + CXL_MBOX_FW_REST_REQD = 0xd,
> > > + CXL_MBOX_INVALID_HANDLE = 0xe,
> > > + CXL_MBOX_INVALID_PA = 0xf,
> > > + CXL_MBOX_INJECT_POISON_LIMIT = 0x10,
> > > + CXL_MBOX_PERMANENT_MEDIA_FAILURE = 0x11,
> > > + CXL_MBOX_ABORTED = 0x12,
> > > + CXL_MBOX_INVALID_SECURITY_STATE = 0x13,
> > > + CXL_MBOX_INCORRECT_PASSPHRASE = 0x14,
> > > + CXL_MBOX_UNSUPPORTED_MAILBOX = 0x15,
> > > + CXL_MBOX_INVALID_PAYLOAD_LENGTH = 0x16,
> > > + CXL_MBOX_MAX = 0x17
> > > +} ret_code;
> > > +
> > > +struct cxl_cmd;
> > > +typedef ret_code (*opcode_handler)(struct cxl_cmd *cmd,
> > > + CXLDeviceState *cxl_dstate, uint16_t
> > > *len);
> > > +struct cxl_cmd {
> > > + const char *name;
> > > + opcode_handler handler;
> > > + ssize_t in;
> > > + uint16_t effect; /* Reported in CEL */
> > > + uint8_t *payload;
> >
> > This payload pointer feels somewhat out of place. Perhaps it should be a
> > parameter
> > passed to the opcode_handler()? The address of the payload doesn't feel
> > like
> > part of the command as such so you are justing using it as somewhere to
> > stash
> > the address when passing to the handler.
> >
> >
> > > +};
> > > +
> > > +#define define_mailbox_handler(name) \
> > > + static ret_code cmd_##name(struct cxl_cmd *cmd, \
> > > + CXLDeviceState *cxl_dstate, uint16_t *len)
> > > +#define declare_mailbox_handler(name) define_mailbox_handler(name)
> > > +
> > > +#define define_mailbox_handler_zeroed(name, size)
> > > \
> > > + uint16_t __zero##name = size;
> > > \
> > > + static ret_code cmd_##name(struct cxl_cmd *cmd,
> > > \
> > > + CXLDeviceState *cxl_dstate, uint16_t
> > > *len) \
> > > + {
> > > \
> > > + *len = __zero##name;
> > > \
> > > + memset(cmd->payload, 0, *len);
> > > \
> > > + return CXL_MBOX_SUCCESS;
> > > \
> > > + }
> > > +#define define_mailbox_handler_const(name, data)
> > > \
> > > + static ret_code cmd_##name(struct cxl_cmd *cmd,
> > > \
> > > + CXLDeviceState *cxl_dstate, uint16_t
> > > *len) \
> > > + {
> > > \
> > > + *len = sizeof(data);
> > > \
> > > + memcpy(cmd->payload, data, *len);
> > > \
> > > + return CXL_MBOX_SUCCESS;
> > > \
> > > + }
> > > +#define define_mailbox_handler_nop(name)
> > > \
> > > + static ret_code cmd_##name(struct cxl_cmd *cmd,
> > > \
> > > + CXLDeviceState *cxl_dstate, uint16_t
> > > *len) \
> > > + {
> > > \
> > > + return CXL_MBOX_SUCCESS;
> > > \
> > > + }
> > > +
> > > +#define CXL_CMD(s, c, in, cel_effect) \
> > > + [s][c] = { stringify(s##_##c), cmd_##s##_##c, in, cel_effect }
> > > +
> > > +static struct cxl_cmd cxl_cmd_set[256][256] = {};
> > > +
> > > +#undef CXL_CMD
> > > +
> > > +QemuUUID cel_uuid;
> > > +
> > > +void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
> > > +{
> > > + uint16_t ret = CXL_MBOX_SUCCESS;
> > > + struct cxl_cmd *cxl_cmd;
> > > + uint64_t status_reg;
> > > + opcode_handler h;
> > > +
> > > + /*
> > > + * current state of mailbox interface
> > > + * mbox_cap_reg = cxl_dstate->reg_state32[R_CXL_DEV_MAILBOX_CAP];
> > > + * mbox_ctrl_reg = cxl_dstate->reg_state32[R_CXL_DEV_MAILBOX_CTRL];
> > > + * status_reg = *(uint64_t
> > > *)&cxl_dstate->reg_state[A_CXL_DEV_MAILBOX_STS];
> > > + */
> > > + uint64_t command_reg =
> > > + *(uint64_t *)&cxl_dstate->mbox_reg_state[A_CXL_DEV_MAILBOX_CMD];
> > > +
> > > + /* Check if we have to do anything */
> > > + if (!ARRAY_FIELD_EX32(cxl_dstate->mbox_reg_state32,
> > > CXL_DEV_MAILBOX_CTRL,
> > > + DOORBELL)) {
> > > + qemu_log_mask(LOG_UNIMP, "Corrupt internal state for
> > > firmware\n");
> > > + return;
> > > + }
> > > +
> > > + uint8_t set = FIELD_EX64(command_reg, CXL_DEV_MAILBOX_CMD,
> > > COMMAND_SET);
> > > + uint8_t cmd = FIELD_EX64(command_reg, CXL_DEV_MAILBOX_CMD, COMMAND);
> > > + uint16_t len = FIELD_EX64(command_reg, CXL_DEV_MAILBOX_CMD, LENGTH);
> > > + cxl_cmd = &cxl_cmd_set[set][cmd];
> > > + h = cxl_cmd->handler;
> > > + if (!h) {
> >
> > This path seems to not convey information it perhaps should. Maybe some
> > feedback that
> > a command was requested that isn't registered?
> >
> > > + goto handled;
> > > + }
> > > +
> > > + if (len != cxl_cmd->in) {
> > > + ret = CXL_MBOX_INVALID_PAYLOAD_LENGTH;
> > > + }
> > > +
> > > + cxl_cmd->payload = cxl_dstate->mbox_reg_state +
> > > A_CXL_DEV_CMD_PAYLOAD;
> > > + ret = (*h)(cxl_cmd, cxl_dstate, &len);
> > > + assert(len <= cxl_dstate->payload_size);
> > > +
> > > +handled:
> > > + /*
> > > + * Set the return code
> > > + * XXX: it's a 64b register, but we're not setting the vendor, so we
> > > can get
> > > + * away with this
> > > + */
> > > + status_reg = FIELD_DP64(0, CXL_DEV_MAILBOX_STS, ERRNO, ret);
> > > +
> > > + /*
> > > + * Set the return length
> > > + */
> > > + command_reg = FIELD_DP64(command_reg, CXL_DEV_MAILBOX_CMD,
> > > COMMAND_SET, 0);
> > > + command_reg = FIELD_DP64(command_reg, CXL_DEV_MAILBOX_CMD, COMMAND,
> > > 0);
> > > + command_reg = FIELD_DP64(command_reg, CXL_DEV_MAILBOX_CMD, LENGTH,
> > > len);
> > > +
> > > + cxl_dstate->mbox_reg_state64[A_CXL_DEV_MAILBOX_CMD / 8] =
> > > command_reg;
> > > + cxl_dstate->mbox_reg_state64[A_CXL_DEV_MAILBOX_STS / 8] = status_reg;
> > > +
> > > + /* Tell the host we're done */
> > > + ARRAY_FIELD_DP32(cxl_dstate->mbox_reg_state32, CXL_DEV_MAILBOX_CTRL,
> > > + DOORBELL, 0);
> > > +}
> > > +
> > > +int cxl_initialize_mailbox(CXLDeviceState *cxl_dstate)
> > > +{
> > > + const char *cel_uuidstr = "0da9c0b5-bf41-4b78-8f79-96b1623b3f17";
> > > +
> > > + for (int i = 0; i < 256; i++) {
> >
> > Instead of indexing with i and j, perhaps this would be more consistent
> > using
> > the naming you have above cmd and set?
> >
> >
> > > + for (int j = 0; j < 256; j++) {
> > > + if (cxl_cmd_set[i][j].handler) {
> > > + struct cxl_cmd *c = &cxl_cmd_set[i][j];
> > > +
> > > + cxl_dstate->cel_log[cxl_dstate->cel_size].opcode = (i <<
> > > 8) | j;
> > > + cxl_dstate->cel_log[cxl_dstate->cel_size].effect =
> > > c->effect;
> > > + cxl_dstate->cel_size++;
> > > + }
> > > + }
> > > + }
> > > +
> > > + return qemu_uuid_parse(cel_uuidstr, &cel_uuid);
> > > +}
> > > diff --git a/hw/cxl/meson.build b/hw/cxl/meson.build
> > > index 47154d6850..0eca715d10 100644
> > > --- a/hw/cxl/meson.build
> > > +++ b/hw/cxl/meson.build
> > > @@ -1,4 +1,5 @@
> > > softmmu_ss.add(when: 'CONFIG_CXL', if_true: files(
> > > 'cxl-component-utils.c',
> > > 'cxl-device-utils.c',
> > > + 'cxl-mailbox-utils.c',
> > > ))
> > > diff --git a/include/hw/cxl/cxl.h b/include/hw/cxl/cxl.h
> > > index 23f52c4cf9..362cda40de 100644
> > > --- a/include/hw/cxl/cxl.h
> > > +++ b/include/hw/cxl/cxl.h
> > > @@ -14,5 +14,8 @@
> > > #include "cxl_component.h"
> > > #include "cxl_device.h"
> > >
> > > +#define COMPONENT_REG_BAR_IDX 0
> > > +#define DEVICE_REG_BAR_IDX 2
> >
> > I'd argue for prefixing all defines
> >
> > CXL_COMPONENT_REG_BAR_IDX etc
> >
> > Will make it clear they are generic CXL related things.
> >
> > > +
> > > #endif
> > >
> > > diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
> > > index f3bcf19410..af91bec10c 100644
> > > --- a/include/hw/cxl/cxl_device.h
> > > +++ b/include/hw/cxl/cxl_device.h
> > > @@ -80,16 +80,27 @@ typedef struct cxl_device_state {
> > > MemoryRegion device_registers;
> > >
> > > /* mmio for device capabilities array - 8.2.8.2 */
> > > + MemoryRegion device;
> > > struct {
> > > MemoryRegion caps;
> > > uint32_t caps_reg_state32[CXL_CAPS_SIZE / 4];
> > > };
> > >
> > > - /* mmio for the device status registers 8.2.8.3 */
> > > - MemoryRegion device;
> > > -
> >
> > Move this block back to where it was originally introduced rather than
> > introduce it then move it later?
> >
> > > /* mmio for the mailbox registers 8.2.8.4 */
> > > - MemoryRegion mailbox;
> > > + struct {
> > > + MemoryRegion mailbox;
> > > + uint16_t payload_size;
> > > + union {
> > > + uint8_t mbox_reg_state[CXL_MAILBOX_REGISTERS_LENGTH];
> > > + uint32_t mbox_reg_state32[CXL_MAILBOX_REGISTERS_LENGTH / 4];
> > > + uint64_t mbox_reg_state64[CXL_MAILBOX_REGISTERS_LENGTH / 8];
> > > + };
> > > + struct {
> > > + uint16_t opcode;
> > > + uint16_t effect;
> > > + } cel_log[1 << 16];
> > > + size_t cel_size;
> > > + };
> >
> > If the structure is unnamed, chances of a naming clash seem rather high
> > if you don't prefix all the elements with mbx_ or something like that.
> >
> > >
> > > /* memory region for persistent memory, HDM */
> > > MemoryRegion *pmem;
> > > @@ -135,6 +146,9 @@ CXL_DEVICE_CAPABILITY_HEADER_REGISTER(DEVICE,
> > > CXL_DEVICE_CAP_HDR1_OFFSET)
> > > CXL_DEVICE_CAPABILITY_HEADER_REGISTER(MAILBOX,
> > > CXL_DEVICE_CAP_HDR1_OFFSET + \
> > > CXL_DEVICE_CAP_REG_SIZE)
> > >
> > > +int cxl_initialize_mailbox(CXLDeviceState *cxl_dstate);
> > > +void cxl_process_mailbox(CXLDeviceState *cxl_dstate);
> > > +
> > > #define cxl_device_cap_init(dstate, reg, cap_id)
> > > \
> > > do {
> > > \
> > > uint32_t *cap_hdrs = dstate->caps_reg_state32;
> > > \
> > > @@ -162,6 +176,12 @@ REG32(CXL_DEV_MAILBOX_CTRL, 4)
> > > FIELD(CXL_DEV_MAILBOX_CTRL, INT_EN, 1, 1)
> > > FIELD(CXL_DEV_MAILBOX_CTRL, BG_INT_EN, 2, 1)
> > >
> > > +/* XXX: actually a 64b register */
> > > +REG32(CXL_DEV_MAILBOX_CMD, 8)
> > > + FIELD(CXL_DEV_MAILBOX_CMD, COMMAND, 0, 8)
> > > + FIELD(CXL_DEV_MAILBOX_CMD, COMMAND_SET, 8, 8)
> > > + FIELD(CXL_DEV_MAILBOX_CMD, LENGTH, 16, 20)
> > > +
> >
> > Ah. this is where this definition went. Perhaps pull it back into patch 3?
> > That patch defines plenty of other things that aren't used until later
> > patches
> > I think, so one more won't hurt and will save me asking why you skipped it:)
> >
> >
> > > /* XXX: actually a 64b register */
> > > REG32(CXL_DEV_MAILBOX_STS, 0x10)
> > > FIELD(CXL_DEV_MAILBOX_STS, BG_OP, 0, 1)
> >
> >
>
>
[RFC PATCH v3 07/31] hw/cxl/device: Add cheap EVENTS implementation (8.2.9.1), Ben Widawsky, 2021/02/01
[RFC PATCH v3 06/31] hw/cxl/device: Add memory device utilities, Ben Widawsky, 2021/02/01
[RFC PATCH v3 09/31] hw/cxl/device: Add log commands (8.2.9.4) + CEL, Ben Widawsky, 2021/02/01
[RFC PATCH v3 10/31] hw/pxb: Use a type for realizing expanders, Ben Widawsky, 2021/02/01
[RFC PATCH v3 08/31] hw/cxl/device: Timestamp implementation (8.2.9.3), Ben Widawsky, 2021/02/01