[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v5 0/5] hw/arm: zynqmp: Implement a CSU DMA model and connect it

From: Bin Meng
Subject: [PATCH v5 0/5] hw/arm: zynqmp: Implement a CSU DMA model and connect it with GQSPI
Date: Wed, 24 Feb 2021 20:50:19 +0800

From: Bin Meng <bin.meng@windriver.com>

ZynqMP QSPI supports SPI transfer using DMA mode, but currently this
is unimplemented. When QSPI is programmed to use DMA mode, QEMU will
crash. This is observed when testing VxWorks 7.

We added a Xilinx CSU DMA model and the implementation is based on
and the one in Edgar's branch.

The DST part of the model is verified along with ZynqMP GQSPI model.

Changes in v5:
- int_enable and int_disable do not affect each other
- do not modify int_status int_disable_pre_write
- set MEM_DONE in xlnx_csu_dma_done if it's SRC

Changes in v4:
- Add complete CSU DMA model based on Edgar's branch
- Differences with Edgar's branch:
  1. Match the registers' FIELD to UG1807.
  2. Remove "byte-align" property. Per UG1807, SIZE and ADDR registers
     must be word aligned.
  3. Make the values of int_enable and int_disable mutually exclusive
     otherwise IRQ cannot be delivered.
  4. Clear int_status after int_disable is set.
  5. Coding convention issues clean-up
- remove one change that is not a checkpatch warning
- Rename "csu_dma" to "qspi_dma"

Changes in v3:
- Implement DMA as a separate CSU DMA model
- new patch: xlnx-zynqmp: Add XLNX CSU DMA module
- new patch: xilinx_spips: Remove DMA related code from zynqmp_qspips

Changes in v2:
- Remove unconnected TYPE_STREAM_SINK link property
- Add a TYPE_MEMORY_REGION link property, to allow board codes to tell
  the device what its view of the world that it is doing DMA to is
- Replace cpu_physical_memory_write() with address_space_write()

Xuzhou Cheng (5):
  hw/dma: xlnx_csu_dma: Implement a Xilinx CSU DMA model
  hw/arm: xlnx-zynqmp: Clean up coding convention issues
  hw/arm: xlnx-zynqmp: Connect a Xilinx CSU DMA module for QSPI
  hw/ssi: xilinx_spips: Clean up coding convention issues
  hw/ssi: xilinx_spips: Remove DMA related dead codes from zynqmp_spips

 include/hw/arm/xlnx-zynqmp.h  |   5 +-
 include/hw/dma/xlnx_csu_dma.h |  52 +++
 include/hw/ssi/xilinx_spips.h |   2 +-
 hw/arm/xlnx-zynqmp.c          |  21 +-
 hw/dma/xlnx_csu_dma.c         | 741 ++++++++++++++++++++++++++++++++++
 hw/ssi/xilinx_spips.c         |  33 +-
 hw/arm/Kconfig                |   1 +
 hw/dma/Kconfig                |   4 +
 hw/dma/meson.build            |   1 +
 9 files changed, 836 insertions(+), 24 deletions(-)
 create mode 100644 include/hw/dma/xlnx_csu_dma.h
 create mode 100644 hw/dma/xlnx_csu_dma.c


reply via email to

[Prev in Thread] Current Thread [Next in Thread]