[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v2 1/1] docs/devel: Add VFIO device migration documentation
From: |
Tarun Gupta |
Subject: |
[PATCH v2 1/1] docs/devel: Add VFIO device migration documentation |
Date: |
Thu, 11 Mar 2021 00:50:09 +0530 |
Document interfaces used for VFIO device migration. Added flow of state changes
during live migration with VFIO device. Tested by building docs with the new
vfio-migration.rst file.
v2:
- Included the new vfio-migration.rst file in index.rst
- Updated dirty page tracking section, also added details about
'pre-copy-dirty-page-tracking' opt-out option.
- Incorporated comments around wording of doc.
Signed-off-by: Tarun Gupta <targupta@nvidia.com>
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
---
MAINTAINERS | 1 +
docs/devel/index.rst | 1 +
docs/devel/vfio-migration.rst | 135 ++++++++++++++++++++++++++++++++++
3 files changed, 137 insertions(+)
create mode 100644 docs/devel/vfio-migration.rst
diff --git a/MAINTAINERS b/MAINTAINERS
index 738786146d..a2a80eee59 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1801,6 +1801,7 @@ M: Alex Williamson <alex.williamson@redhat.com>
S: Supported
F: hw/vfio/*
F: include/hw/vfio/
+F: docs/devel/vfio-migration.rst
vfio-ccw
M: Cornelia Huck <cohuck@redhat.com>
diff --git a/docs/devel/index.rst b/docs/devel/index.rst
index ae664da00c..5330f1ca1d 100644
--- a/docs/devel/index.rst
+++ b/docs/devel/index.rst
@@ -39,3 +39,4 @@ Contents:
qom
block-coroutine-wrapper
multi-process
+ vfio-migration
diff --git a/docs/devel/vfio-migration.rst b/docs/devel/vfio-migration.rst
new file mode 100644
index 0000000000..6196fb132c
--- /dev/null
+++ b/docs/devel/vfio-migration.rst
@@ -0,0 +1,135 @@
+=====================
+VFIO device Migration
+=====================
+
+VFIO devices use an iterative approach for migration because certain VFIO
+devices (e.g. GPU) have large amount of data to be transfered. The iterative
+pre-copy phase of migration allows for the guest to continue whilst the VFIO
+device state is transferred to the destination, this helps to reduce the total
+downtime of the VM. VFIO devices can choose to skip the pre-copy phase of
+migration by returning pending_bytes as zero during the pre-copy phase.
+
+A detailed description of the UAPI for VFIO device migration can be found in
+the comment for the ``vfio_device_migration_info`` structure in the header
+file linux-headers/linux/vfio.h.
+
+VFIO device hooks for iterative approach:
+
+* A ``save_setup`` function that sets up the migration region, sets _SAVING
+ flag in the VFIO device state and informs the VFIO IOMMU module to start
+ dirty page tracking.
+
+* A ``load_setup`` function that sets up the migration region on the
+ destination and sets _RESUMING flag in the VFIO device state.
+
+* A ``save_live_pending`` function that reads pending_bytes from the vendor
+ driver, which indicates the amount of data that the vendor driver has yet to
+ save for the VFIO device.
+
+* A ``save_live_iterate`` function that reads the VFIO device's data from the
+ vendor driver through the migration region during iterative phase.
+
+* A ``save_live_complete_precopy`` function that resets _RUNNING flag from the
+ VFIO device state, saves the device config space, if any, and iteratively
+ copies the remaining data for the VFIO device untill the vendor driver
+ indicates that no data remains (pending bytes is zero).
+
+* A ``load_state`` function that loads the config section and the data
+ sections that are generated by the save functions above
+
+* ``cleanup`` functions for both save and load that perform any migration
+ related cleanup, including unmapping the migration region
+
+A VM state change handler is registered to change the VFIO device state when
+the VM state changes.
+
+Similarly, a migration state change notifier is registered to get a
+notification on migration state change. These states are translated to VFIO
+device state and conveyed to vendor driver.
+
+System memory dirty pages tracking
+----------------------------------
+
+A ``log_sync`` memory listener callback marks those system memory pages
+as dirty which are used for DMA by the VFIO device. The dirty pages bitmap is
+queried per container. All pages pinned by the vendor driver through
+vfio_pin_pages() external API have to be marked as dirty during migration.
+When there are CPU writes, CPU dirty page tracking can identify dirtied pages,
+but any page pinned by the vendor driver can also be written by device. There
+is currently no device which has hardware support for dirty page tracking. So
+all pages which are pinned by vendor driver are considered as dirty.
+
+By default, dirty pages are tracked when the device is in pre-copy as well as
+stop-and-copy phase. So, a page pinned by the vendor driver using
+vfio_pin_pages() will be copied to destination in both the phases. Copying
+dirty pages in pre-copy phase helps QEMU to predict if it can achieve its
+downtime tolerances.
+
+QEMU also provides a per device opt-out option ``pre-copy-dirty-page-tracking``
+to disable dirty page tracking during pre-copy phase. If it is set to off, all
+pinned pages will be copied to destination in stop-and-copy phase only.
+
+System memory dirty pages tracking when vIOMMU is enabled
+---------------------------------------------------------
+
+With vIOMMU, an IO virtual address range can get unmapped while in pre-copy
+phase of migration. In that case, the unmap ioctl returns any pinned pages in
+that range and QEMU reports corresponding guest physical pages dirty. During
+stop-and-copy phase, an IOMMU notifier is used to get a callback for mapped
+pages and then dirty pages bitmap is fetched from VFIO IOMMU modules for those
+mapped ranges.
+
+Flow of state changes during Live migration
+===========================================
+
+Below is the flow of state change during live migration.
+The values in the brackets represent the VM state, the migration state, and
+the VFIO device state, respectively.
+
+Live migration save path
+------------------------
+
+::
+
+ QEMU normal running state
+ (RUNNING, _NONE, _RUNNING)
+ |
+ migrate_init spawns migration_thread
+ Migration thread then calls each device's .save_setup()
+ (RUNNING, _SETUP, _RUNNING|_SAVING)
+ |
+ (RUNNING, _ACTIVE, _RUNNING|_SAVING)
+ If device is active, get pending_bytes by .save_live_pending()
+ If total pending_bytes >= threshold_size, call .save_live_iterate()
+ Data of VFIO device for pre-copy phase is copied
+ Iterate till total pending bytes converge and are less than threshold
+ |
+ On migration completion, vCPU stops and calls .save_live_complete_precopy for
+ each active device. The VFIO device is then transitioned into _SAVING state
+ (FINISH_MIGRATE, _DEVICE, _SAVING)
+ |
+ For the VFIO device, iterate in .save_live_complete_precopy until
+ pending data is 0
+ (FINISH_MIGRATE, _DEVICE, _STOPPED)
+ |
+ (FINISH_MIGRATE, _COMPLETED, _STOPPED)
+ Migraton thread schedules cleanup bottom half and exits
+
+Live migration resume path
+--------------------------
+
+::
+
+ Incoming migration calls .load_setup for each device
+ (RESTORE_VM, _ACTIVE, _STOPPED)
+ |
+ For each device, .load_state is called for that device section data
+ (RESTORE_VM, _ACTIVE, _RESUMING)
+ |
+ At the end, .load_cleanup is called for each device and vCPUs are started
+ (RUNNING, _NONE, _RUNNING)
+
+Postcopy
+========
+
+Postcopy migration is not supported for VFIO devices.
--
2.27.0
- [PATCH v2 1/1] docs/devel: Add VFIO device migration documentation,
Tarun Gupta <=
RE: [PATCH v2 1/1] docs/devel: Add VFIO device migration documentation, Tian, Kevin, 2021/03/11
Re: [PATCH v2 1/1] docs/devel: Add VFIO device migration documentation, Cornelia Huck, 2021/03/15