qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PULL 5/5] m68k: add Virtual M68k Machine


From: Philippe Mathieu-Daudé
Subject: Re: [PULL 5/5] m68k: add Virtual M68k Machine
Date: Thu, 18 Mar 2021 10:19:18 +0100
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101 Thunderbird/78.8.0

Hi Laurent,

+Paolo / Thomas

On 3/15/21 9:42 PM, Laurent Vivier wrote:
> The machine is based on Goldfish interfaces defined by Google
> for Android simulator. It uses Goldfish-rtc (timer and RTC),
> Goldfish-pic (PIC) and Goldfish-tty (for serial port and early tty).
> 
> The machine is created with 128 virtio-mmio bus, and they can
> be used to use serial console, GPU, disk, NIC, HID, ...
> 
> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> Message-Id: <20210312214145.2936082-6-laurent@vivier.eu>
> ---
>  default-configs/devices/m68k-softmmu.mak      |   1 +
>  .../standard-headers/asm-m68k/bootinfo-virt.h |  18 +
>  hw/m68k/virt.c                                | 313 ++++++++++++++++++
>  MAINTAINERS                                   |  13 +
>  hw/m68k/Kconfig                               |   9 +
>  hw/m68k/meson.build                           |   1 +
>  6 files changed, 355 insertions(+)
>  create mode 100644 include/standard-headers/asm-m68k/bootinfo-virt.h
>  create mode 100644 hw/m68k/virt.c

> diff --git a/hw/m68k/Kconfig b/hw/m68k/Kconfig
> index 60d7bcfb8f2b..f839f8a03064 100644
> --- a/hw/m68k/Kconfig
> +++ b/hw/m68k/Kconfig
> @@ -23,3 +23,12 @@ config Q800
>      select ESP
>      select DP8393X
>      select OR_IRQ
> +
> +config M68K_VIRT
> +    bool
> +    select M68K_IRQC
> +    select VIRT_CTRL
> +    select GOLDFISH_PIC
> +    select GOLDFISH_TTY
> +    select GOLDFISH_RTC
> +    select VIRTIO_MMIO

I had this error on gitlab:

(qemu) QEMU_PROG: -drive driver=IMGFMT,file=TEST_DIR/t.IMGFMT,if=virtio:
'virtio-blk-pci' is not a valid device model name
job: check-system-fedora
https://gitlab.com/philmd/qemu/-/jobs/1106469724

I bisected locally to this commit.

check-system-fedora uses build-system-fedora:

build-system-fedora:
    CONFIGURE_ARGS: --disable-gcrypt --enable-nettle --enable-docs
             --enable-fdt=system --enable-slirp=system
             --enable-capstone=system

I'm confused because the machine provides a VIRTIO bus
via MMIO:

config VIRTIO_MMIO
    bool
    select VIRTIO

I remember I tested your machine with virtio-blk-device.

config VIRTIO_BLK
    bool
    default y
    depends on VIRTIO

Ah, this is virtio-blk-pci, which has:

virtio_pci_ss.add(when: 'CONFIG_VIRTIO_BLK', if_true:
files('virtio-blk-pci.c'))
virtio_ss.add_all(when: 'CONFIG_VIRTIO_PCI', if_true: virtio_pci_ss)

And VIRTIO_PCI isn't selected...

Are the tests incorrect then?

libqos isn't restricted to PCI:

tests/qtest/libqos/virtio-blk.c:24:#include "virtio-blk.h"
tests/qtest/libqos/virtio-blk.c:29:/* virtio-blk-device */
tests/qtest/libqos/virtio-blk.c:33:    if (!g_strcmp0(interface,
"virtio-blk")) {
tests/qtest/libqos/virtio-blk.c:40:    fprintf(stderr, "%s not present
in virtio-blk-device\n", interface);
tests/qtest/libqos/virtio-blk.c:109:    /* virtio-blk-device */
tests/qtest/libqos/virtio-blk.c:111:
qos_node_create_driver("virtio-blk-device", virtio_blk_device_create);
tests/qtest/libqos/virtio-blk.c:112:
qos_node_consumes("virtio-blk-device", "virtio-bus", &opts);
tests/qtest/libqos/virtio-blk.c:113:
qos_node_produces("virtio-blk-device", "virtio-blk");

But qemu-iotests / qtests do use virtio-blk-pci. Maybe they should
use a generic virtio-blk-device instead, hoping it get plugged correctly
to the virtio bus...




reply via email to

[Prev in Thread] Current Thread [Next in Thread]