qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Bug 1921635] Re: ESP SCSI adapter not working with DOS ASPI drivers


From: Hein-PietervanBraam
Subject: [Bug 1921635] Re: ESP SCSI adapter not working with DOS ASPI drivers
Date: Sun, 28 Mar 2021 17:30:50 -0000

** Attachment added: "dc390 dos bootdisk with all drivers enabled"
   
https://bugs.launchpad.net/qemu/+bug/1921635/+attachment/5481638/+files/dc390_all.img

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1921635

Title:
  ESP SCSI adapter not working with DOS ASPI drivers

Status in QEMU:
  New

Bug description:
  I have been trying to install the DOS ASPI drivers for the ESP scsi
  card. Both in am53c974 and dc390 modes. Neither works but they don't
  work in different ways.

  The following things appear to be problematic:

  * The am53c974 should work with the PcSCSI drivers (AMSIDA.SYS) but the ASPI 
driver never manages to get past initializing the card. The VM never continues.
  * The dc390 ASPI driver fares a little better. The ASPI driver loads and is 
semi-functional but the drivers for the peripherals don't work.
   - ASPI.SYS (creative name) loads
   - TRMDISK.SYS fails to load when a cd-drive is attached and will crashs 
scanning the scsi-id where the cd drive is attached
   - TRMDISK.SYS loads without a CD drive attached but fails to read any 
scsi-hd devices attached. The TFDISK.EXE formatter crashes.
   - TRMCD.SYS loads, but can not detect any CD drives.

  The various permutations:
  am53c974 hang on ASPI driver load: (CD only attached)

  ~/src/qemu/build/qemu-system-i386 -m 64 -device am53c974,id=scsi0
  -device scsi-cd,drive=drive0,bus=scsi0.0,channel=0,scsi-id=0,lun=0
  -drive file=../Windows\ 98\ Second\ Edition.iso,if=none,id=drive0 -vga
  cirrus -fda am53c974_aspi.img -bios /home/hp/src/seabios/out/bios.bin
  -boot a  -trace 'scsi*' -trace 'esp*' -D log

  dc390 crash because of CDROM attachment and loading TRMDISK.SYS (Only CD 
attached)
  ~/src/qemu/build/qemu-system-i386 -m 64 -device dc390,id=scsi0,rombar=0 
-device scsi-cd,drive=drive0,bus=scsi0.0,channel=0,scsi-id=0,lun=0 -drive 
file=../Windows\ 98\ Second\ Edition.iso,if=none,id=drive0 -vga cirrus -fda 
dc390_all.img  -bios /home/hp/src/seabios/out/bios.bin -boot a  -trace 'scsi*' 
-trace 'esp*' -D log

  dc390 successful boot, but TRMDISK.SYS not working (TFDISK.EXE will crash)
  ~/src/qemu/build/qemu-system-i386 -m 64 -device dc390,id=scsi0 -device 
scsi-hd,drive=drive0,bus=scsi0.0,channel=0,scsi-id=0,lun=0,logical_block_size=512
 -drive file=small.qcow2,if=none,id=drive0 -vga cirrus -fda dc390_all.img -bios 
/home/hp/src/seabios/out/bios.bin -boot a  -trace 'scsi*' -trace 'esp*' -D log

  dc390 successful boot, TRMDISK.SYS not loaded, only TRMCD.SYS. CDROM not 
detected
  ~/src/qemu/build/qemu-system-i386 -m 64 -device dc390,id=scsi0,rombar=0 
-device scsi-cd,drive=drive0,bus=scsi0.0,channel=0,scsi-id=0,lun=0 -drive 
file=../Windows\ 98\ Second\ Edition.iso,if=none,id=drive0 -vga cirrus -fda 
dc390_cd.img  -bios /home/hp/src/seabios/out/bios.bin -boot a  -trace 'scsi*' 
-trace 'esp*' -D log

  All of these tests were done on
  7b9a3c9f94bcac23c534bc9f42a9e914b433b299 as well as the 'esp-next'
  branch found here: https://github.com/mcayland/qemu/tree/esp-next

  The bios file is a seabios master with all int13 support disabled.
  With it enabled even less works but I figured this would be a seabios
  bug and not a qemu one.

  The actual iso and qcow2 files used don't appear the matter. the
  'small.qcow2' is an empty drive of 100MB. I have also tried other ISOs
  in the CD drives, or even not put any cd in the drives with the same
  results.

  I will attach all of the above images.

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1921635/+subscriptions



reply via email to

[Prev in Thread] Current Thread [Next in Thread]