[PATCH 5/8] docs/system/riscv: Correct the indentation level of supported devices

[Bin Meng]

From: Bin Meng <bin.meng@windriver.com>

The supported device bullet list has an additional space before each
entry, which makes a wrong indentation level. Correct it.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
---

 docs/system/riscv/microchip-icicle-kit.rst | 20 +++++++--------
 docs/system/riscv/sifive_u.rst             | 30 +++++++++++-----------
 2 files changed, 25 insertions(+), 25 deletions(-)

diff --git a/docs/system/riscv/microchip-icicle-kit.rst 
b/docs/system/riscv/microchip-icicle-kit.rst
index 4fe97bce3f..e803131763 100644
--- a/docs/system/riscv/microchip-icicle-kit.rst
+++ b/docs/system/riscv/microchip-icicle-kit.rst
@@ -15,16 +15,16 @@ Supported devices
 
 The ``microchip-icicle-kit`` machine supports the following devices:
 
- * 1 E51 core
- * 4 U54 cores
- * Core Level Interruptor (CLINT)
- * Platform-Level Interrupt Controller (PLIC)
- * L2 Loosely Integrated Memory (L2-LIM)
- * DDR memory controller
- * 5 MMUARTs
- * 1 DMA controller
- * 2 GEM Ethernet controllers
- * 1 SDHC storage controller
+* 1 E51 core
+* 4 U54 cores
+* Core Level Interruptor (CLINT)
+* Platform-Level Interrupt Controller (PLIC)
+* L2 Loosely Integrated Memory (L2-LIM)
+* DDR memory controller
+* 5 MMUARTs
+* 1 DMA controller
+* 2 GEM Ethernet controllers
+* 1 SDHC storage controller
 
 Boot options
 ------------
diff --git a/docs/system/riscv/sifive_u.rst b/docs/system/riscv/sifive_u.rst
index 98e7562848..dcdfbda931 100644
--- a/docs/system/riscv/sifive_u.rst
+++ b/docs/system/riscv/sifive_u.rst
@@ -9,21 +9,21 @@ Supported devices
 
 The ``sifive_u`` machine supports the following devices:
 
- * 1 E51 / E31 core
- * Up to 4 U54 / U34 cores
- * Core Level Interruptor (CLINT)
- * Platform-Level Interrupt Controller (PLIC)
- * Power, Reset, Clock, Interrupt (PRCI)
- * L2 Loosely Integrated Memory (L2-LIM)
- * DDR memory controller
- * 2 UARTs
- * 1 GEM Ethernet controller
- * 1 GPIO controller
- * 1 One-Time Programmable (OTP) memory with stored serial number
- * 1 DMA controller
- * 2 QSPI controllers
- * 1 ISSI 25WP256 flash
- * 1 SD card in SPI mode
+* 1 E51 / E31 core
+* Up to 4 U54 / U34 cores
+* Core Level Interruptor (CLINT)
+* Platform-Level Interrupt Controller (PLIC)
+* Power, Reset, Clock, Interrupt (PRCI)
+* L2 Loosely Integrated Memory (L2-LIM)
+* DDR memory controller
+* 2 UARTs
+* 1 GEM Ethernet controller
+* 1 GPIO controller
+* 1 One-Time Programmable (OTP) memory with stored serial number
+* 1 DMA controller
+* 2 QSPI controllers
+* 1 ISSI 25WP256 flash
+* 1 SD card in SPI mode
 
 Please note the real world HiFive Unleashed board has a fixed configuration of
 1 E51 core and 4 U54 core combination and the RISC-V core boots in 64-bit mode.
-- 
2.25.1