qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH] ppc/spapr: Add support for implement support for H_SCM_HEALT


From: David Gibson
Subject: Re: [PATCH] ppc/spapr: Add support for implement support for H_SCM_HEALTH
Date: Wed, 31 Mar 2021 10:49:07 +1100

On Tue, Mar 30, 2021 at 10:37:06PM +0530, Vaibhav Jain wrote:
> 
> Thanks for looking into this patch Greg. My responses below inline.
> 
> 
> Greg Kurz <groug@kaod.org> writes:
> 
> > Hi Vaibhav,
> >
> > Great to see you around :-)
> 
> :-)
> 
> >
> > On Mon, 29 Mar 2021 21:52:59 +0530
> > Vaibhav Jain <vaibhav@linux.ibm.com> wrote:
> >
> >> Add support for H_SCM_HEALTH hcall described at [1] for spapr
> >> nvdimms. This enables guest to detect the 'unarmed' status of a
> >> specific spapr nvdimm identified by its DRC and if its unarmed, mark
> >> the region backed by the nvdimm as read-only.
> >> 
> >
> > Any chance that you can provide the documentation of this new hcall ?
> >
> H_SCM_HEALTH specifications is already documented in linux kernel
> documentation at
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/powerpc/papr_hcalls.rst

Putting a reference to that in the commit message would be a good idea.

> That documentation was added when kernel support for H_SCM_HEALTH hcall
> support was implemented in 5.9 kernel. 
> 
> >> The patch adds h_scm_health() to handle the H_SCM_HEALTH hcall which
> >> returns two 64-bit bitmaps (health bitmap, health bitmap mask) derived
> >> from 'struct nvdimm->unarmed' member.
> >> 
> >> Linux kernel side changes to enable handling of 'unarmed' nvdimms for
> >> ppc64 are proposed at [2].
> >> 
> >> References:
> >> [1] "Hypercall Op-codes (hcalls)"
> >>     
> >> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/powerpc/papr_hcalls.rst
> >> 
> >> [2] "powerpc/papr_scm: Mark nvdimm as unarmed if needed during probe"
> >>     
> >> https://lore.kernel.org/linux-nvdimm/20210329113103.476760-1-vaibhav@linux.ibm.com/
> >> 
> >> Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
> >> ---
> >>  hw/ppc/spapr_nvdimm.c  | 30 ++++++++++++++++++++++++++++++
> >>  include/hw/ppc/spapr.h |  4 ++--
> >>  2 files changed, 32 insertions(+), 2 deletions(-)
> >> 
> >> diff --git a/hw/ppc/spapr_nvdimm.c b/hw/ppc/spapr_nvdimm.c
> >> index b46c36917c..e38740036d 100644
> >> --- a/hw/ppc/spapr_nvdimm.c
> >> +++ b/hw/ppc/spapr_nvdimm.c
> >> @@ -31,6 +31,13 @@
> >>  #include "qemu/range.h"
> >>  #include "hw/ppc/spapr_numa.h"
> >>  
> >> +/* DIMM health bitmap bitmap indicators */
> >> +/* SCM device is unable to persist memory contents */
> >> +#define PAPR_PMEM_UNARMED (1ULL << (63 - 0))
> >
> > This looks like PPC_BIT(0).
> >
> Yes, right. Will update the patch in v2 to use the PPC_BIT macro.
> 
> >> +
> >> +/* Bits status indicators for health bitmap indicating unarmed dimm */
> >> +#define PAPR_PMEM_UNARMED_MASK (PAPR_PMEM_UNARMED)
> >> +
> >>  bool spapr_nvdimm_validate(HotplugHandler *hotplug_dev, NVDIMMDevice 
> >> *nvdimm,
> >>                             uint64_t size, Error **errp)
> >>  {
> >> @@ -467,6 +474,28 @@ static target_ulong h_scm_unbind_all(PowerPCCPU *cpu, 
> >> SpaprMachineState *spapr,
> >>      return H_SUCCESS;
> >>  }
> >>  
> >> +static target_ulong h_scm_health(PowerPCCPU *cpu, SpaprMachineState 
> >> *spapr,
> >> +                                 target_ulong opcode, target_ulong *args)
> >> +{
> >> +    uint32_t drc_index = args[0];
> >> +    SpaprDrc *drc = spapr_drc_by_index(drc_index);
> >> +    NVDIMMDevice *nvdimm;
> >> +
> >> +    if (drc && spapr_drc_type(drc) != SPAPR_DR_CONNECTOR_TYPE_PMEM) {
> >> +        return H_PARAMETER;
> >> +    }
> >> +
> >> +    nvdimm = NVDIMM(drc->dev);
> >
> > Yeah as already suggested by Shiva, drc->dev should be checked like
> > in h_scm_bind_mem().
> >
> Yes, will send a v2 with this case handled.
> 
> >> +
> >> +    /* Check if the nvdimm is unarmed and send its status via health 
> >> bitmaps */
> >> +    args[0] = nvdimm->unarmed ? PAPR_PMEM_UNARMED_MASK : 0;
> >> +
> >
> > Shouldn't ^^ use PAPR_PMEM_UNARMED then ?
> >
> >> +    /* health bitmap mask same as the health bitmap */
> >> +    args[1] = args[0];
> >> +
> >
> > If so, it seems that PAPR_PMEM_UNARMED_MASK isn't even needed.
> 
> Definition of these defines are similar to what kernel implementation
> uses at
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/powerpc/platforms/pseries/papr_scm.c#n53
> 
> Since unarmed condition can also arise due to an unhealthy nvdimm hence
> the kernel implementation uses a mask thats composed of two bits
> PPC_BIT(0) and PPC_BIT(6) being set. Though we arent using PPC_BIT(6)
> right now in qemu, it will change in future when better nvdimm health
> reporting will be done. Hence kept the PPC_BIT(0) define as well as the
> mask to mimic the kernel definitions.
> 
> >
> > Having access to the excerpts from the PAPR addendum that describes
> > this hcall would _really_ help in reviewing.
> >
> The kernel documentation for H_SCM_HEALTH mentioned above captures most
> if not all parts of the PAPR addendum for this hcall. I believe it
> contains enough information to review the patch. If you still need more
> info than please let me know.

We've missed the qemu-6.0 cutoff, so this will be 6.1 material.  I'll
await v2 for further review.

-- 
David Gibson                    | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au  | minimalist, thank you.  NOT _the_ _other_
                                | _way_ _around_!
http://www.ozlabs.org/~dgibson

Attachment: signature.asc
Description: PGP signature


reply via email to

[Prev in Thread] Current Thread [Next in Thread]