Re: [PATCH] docs: Add documentation for shakti_c machine

[Alistair Francis]

On Tue, Apr 13, 2021 at 3:44 AM Vijai Kumar K <vijai@behindbytes.com> wrote:
>
> Add documentation for Shakti C reference platform.
>
> Signed-off-by: Vijai Kumar K <vijai@behindbytes.com>

Thanks!

Applied to riscv-to-apply.next

Alistair

> ---
>  docs/system/riscv/shakti-c.rst | 82 ++++++++++++++++++++++++++++++++++
>  1 file changed, 82 insertions(+)
>  create mode 100644 docs/system/riscv/shakti-c.rst
>
> diff --git a/docs/system/riscv/shakti-c.rst b/docs/system/riscv/shakti-c.rst
> new file mode 100644
> index 0000000000..a6035d42b0
> --- /dev/null
> +++ b/docs/system/riscv/shakti-c.rst
> @@ -0,0 +1,82 @@
> +Shakti C Reference Platform (``shakti_c``)
> +==========================================
> +
> +Shakti C Reference Platform is a reference platform based on arty a7 100t
> +for the Shakti SoC.
> +
> +Shakti SoC is a SoC based on the Shakti C-class processor core. Shakti C
> +is a 64bit RV64GCSUN processor core.
> +
> +For more details on Shakti SoC, please see:
> +https://gitlab.com/shaktiproject/cores/shakti-soc/-/blob/master/fpga/boards/artya7-100t/c-class/README.rst
> +
> +For more info on the Shakti C-class core, please see:
> +https://c-class.readthedocs.io/en/latest/
> +
> +Supported devices
> +-----------------
> +
> +The ``shakti_c`` machine supports the following devices:
> +
> + * 1 C-class core
> + * Core Level Interruptor (CLINT)
> + * Platform-Level Interrupt Controller (PLIC)
> + * 1 UART
> +
> +Boot options
> +------------
> +
> +The ``shakti_c`` machine can start using the standard -bios
> +functionality for loading the baremetal application or opensbi.
> +
> +Boot the machine
> +----------------
> +
> +Shakti SDK
> +~~~~~~~~~~
> +Shakti SDK can be used to generate the baremetal example UART applications.
> +
> +.. code-block:: bash
> +
> +   $ git clone https://gitlab.com/behindbytes/shakti-sdk.git
> +   $ cd shakti-sdk
> +   $ make software PROGRAM=loopback TARGET=artix7_100t
> +
> +Binary would be generated in:
> +  software/examples/uart_applns/loopback/output/loopback.shakti
> +
> +You could also download the precompiled example applicatons using below
> +commands.
> +
> +.. code-block:: bash
> +
> +   $ wget -c 
> https://gitlab.com/behindbytes/shakti-binaries/-/raw/master/sdk/shakti_sdk_qemu.zip
> +   $ unzip shakti_sdk_qemu.zip
> +
> +Then we can run the UART example using:
> +
> +.. code-block:: bash
> +
> +   $ qemu-system-riscv64 -M shakti_c -nographic \
> +      -bios path/to/shakti_sdk_qemu/loopback.shakti
> +
> +OpenSBI
> +~~~~~~~
> +We can also run OpenSBI with Test Payload.
> +
> +.. code-block:: bash
> +
> +   $ git clone https://github.com/riscv/opensbi.git -b v0.9
> +   $ cd opensbi
> +   $ wget -c 
> https://gitlab.com/behindbytes/shakti-binaries/-/raw/master/dts/shakti.dtb
> +   $ export CROSS_COMPILE=riscv64-unknown-elf-
> +   $ export FW_FDT_PATH=./shakti.dtb
> +   $ make PLATFORM=generic
> +
> +fw_payload.elf would be generated in 
> build/platform/generic/firmware/fw_payload.elf.
> +Boot it using the below qemu command.
> +
> +.. code-block:: bash
> +
> +   $ qemu-system-riscv64 -M shakti_c -nographic \
> +      -bios path/to/fw_payload.elf
> --
> 2.25.1
>
>
>