[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v7 2/6] target/i386: Enable XSS feature enumeration for CPUID
From: |
Yang Weijiang |
Subject: |
Re: [PATCH v7 2/6] target/i386: Enable XSS feature enumeration for CPUID |
Date: |
Fri, 7 May 2021 14:25:11 +0800 |
User-agent: |
Mutt/1.5.24 (2015-08-30) |
On Thu, May 06, 2021 at 06:16:47PM -0400, Eduardo Habkost wrote:
> On Fri, Feb 26, 2021 at 10:20:54AM +0800, Yang Weijiang wrote:
> > Currently, CPUID.(EAX=0DH,ECX=01H) doesn't enumerate features in
> > XSS properly, add the support here. XCR0 bits indicate user-mode XSAVE
> > components, and XSS bits indicate supervisor-mode XSAVE components.
> >
> > Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
> > ---
> > target/i386/cpu.c | 48 ++++++++++++++++++++++++++++++++++++++++++-----
> > target/i386/cpu.h | 12 ++++++++++++
> > 2 files changed, 55 insertions(+), 5 deletions(-)
> >
[...]
> > @@ -1478,6 +1496,9 @@ static uint32_t xsave_area_size(uint64_t mask)
> > for (i = 0; i < ARRAY_SIZE(x86_ext_save_areas); i++) {
> > const ExtSaveArea *esa = &x86_ext_save_areas[i];
> > if ((mask >> i) & 1) {
> > + if (i >= 2 && !esa->offset) {
>
> Maybe a few comments at the definition of ExtSaveArea to explain
> that offset can now be zero (and what it means when it's zero)
> would be helpful. I took a while to understand why this is safe.
>
Thanks Eduardo!
Sure, I'll add some comments in next version.
> Would it be valid to say "ExtSaveArea.offset has a valid offset
> only if the component is in CPUID_XSTATE_XCR0_MASK"? If so,
> can't this check be simply replaced with:
> if ((1 << i) & CPUID_XSTATE_XCR0_MASK)
> ?
>
> Or maybe this function should just contain a:
> assert(!(mask & CPUID_XSTATE_XCR0_MASK));
> at the beginning?
>
Maybe I need to modifiy the function a bit to accommodate compacted format
size calculation for CPUID(0xD,1).EBX.
>
> > + continue;
> > + }
> > ret = MAX(ret, esa->offset + esa->size);
> > }
> > }
> > @@ -1489,12 +1510,18 @@ static inline bool accel_uses_host_cpuid(void)
> > return kvm_enabled() || hvf_enabled();
> > }
[...]
> >
> > @@ -5716,7 +5743,7 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index,
> > uint32_t count,
> > }
> >
> > if (count == 0) {
> > - *ecx = xsave_area_size(x86_cpu_xsave_components(cpu));
> > + *ecx = xsave_area_size(x86_cpu_xsave_xcr0_components(cpu));
> > *eax = env->features[FEAT_XSAVE_XCR0_LO];
> > *edx = env->features[FEAT_XSAVE_XCR0_HI];
> > /*
> > @@ -5728,11 +5755,17 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t
> > index, uint32_t count,
> > *ebx = kvm_enabled() ? *ecx : xsave_area_size(env->xcr0);
> > } else if (count == 1) {
> > *eax = env->features[FEAT_XSAVE];
> > + *ecx = env->features[FEAT_XSAVE_XSS_LO];
> > + *edx = env->features[FEAT_XSAVE_XSS_HI];
>
> What about EBX? It is documented as "The size in bytes of the
> XSAVE area containing all states enabled by XCRO | IA32_XSS".
>
> The Intel SDM is not clear, but I assume this would be
> necessarily the size of the area in compacted format?
Yes, I'll add ebx assignment.
>
>
> > } else if (count < ARRAY_SIZE(x86_ext_save_areas)) {
> > - if ((x86_cpu_xsave_components(cpu) >> count) & 1) {
> > - const ExtSaveArea *esa = &x86_ext_save_areas[count];
> > + const ExtSaveArea *esa = &x86_ext_save_areas[count];
> > + if ((x86_cpu_xsave_xcr0_components(cpu) >> count) & 1) {
> > *eax = esa->size;
> > *ebx = esa->offset;
> > + } else if ((x86_cpu_xsave_xss_components(cpu) >> count) & 1) {
> > + *eax = esa->size;
> > + *ebx = 0;
> > + *ecx = 1;
> > }
> > }
> > break;
> > @@ -6059,6 +6092,9 @@ static void x86_cpu_reset(DeviceState *dev)
> > }
> > for (i = 2; i < ARRAY_SIZE(x86_ext_save_areas); i++) {
> > const ExtSaveArea *esa = &x86_ext_save_areas[i];
> > + if (!esa->offset) {
> > + continue;
>
> Most of the comments at the xsave_area_size() hunk would apply
> here. I miss some clarity on what esa->offset==0 really means.
>
> Would it be valid to replace this with a check for
> ((1 << i) & CPUID_XSTATE_XCR0_MASK)
> ?
Sure, I'll use this check to make things clearer, thanks for the comments!
>
> > + }
> > if (env->features[esa->feature] & esa->bits) {
> > xcr0 |= 1ull << i;
> > }
[...]
> > +/* CPUID feature bits available in XCR0 */
> > +#define CPUID_XSTATE_XCR0_MASK (XSTATE_FP_MASK | XSTATE_SSE_MASK | \
> > + XSTATE_YMM_MASK | XSTATE_BNDREGS_MASK | \
> > + XSTATE_BNDCSR_MASK | XSTATE_OPMASK_MASK |
> > \
> > + XSTATE_ZMM_Hi256_MASK | \
> > + XSTATE_Hi16_ZMM_MASK | XSTATE_PKRU_MASK)
> > +
> > +/* CPUID feature bits available in XSS */
> > +#define CPUID_XSTATE_XSS_MASK 0
>
> Do you expect this to be used outside target/i386/cpu.c? If not,
> maybe it could be moved close to the x86_ext_save_areas[]
> definition, as any updates to x86_ext_save_areas will require an
> update to these macros.
>
> > +
> > /* CPUID feature words */
> > typedef enum FeatureWord {
> > FEAT_1_EDX, /* CPUID[1].EDX */
> > @@ -541,6 +551,8 @@ typedef enum FeatureWord {
> > FEAT_VMX_EPT_VPID_CAPS,
> > FEAT_VMX_BASIC,
> > FEAT_VMX_VMFUNC,
> > + FEAT_XSAVE_XSS_LO, /* CPUID[EAX=0xd,ECX=1].ECX */
> > + FEAT_XSAVE_XSS_HI, /* CPUID[EAX=0xd,ECX=1].EDX */
> > FEATURE_WORDS,
> > } FeatureWord;
> >
> > --
> > 2.26.2
> >
> >
>
> --
> Eduardo