On Jun 1 07:30, Niklas Cassel wrote:
> On Mon, May 31, 2021 at 09:39:20PM +0200, Klaus Jensen wrote:
> > On May 31 15:42, Niklas Cassel wrote:
> > > On Fri, May 28, 2021 at 01:22:38PM +0200, Klaus Jensen wrote:
> > > > On May 28 11:05, Niklas Cassel wrote:
> > > > > From: Niklas Cassel <niklas.cassel@wdc.com>
> > > > >
> > > > > In the Zoned Namespace Command Set Specification, chapter
> > > > > 2.5.1 Managing resources
> > > > >
> > > > > "The controller may transition zones in the ZSIO:Implicitly Opened
state
> > > > > to the ZSC:Closed state for resource management purposes."
> > > > >
> > > > > The word may in this sentence means that automatically transitioning
> > > > > an implicitly opened zone to closed is completely optional.
> > > > >
> > > > > Add a new parameter so that the user can control if this automatic
> > > > > transitioning should be performed or not.
> > > > >
> > > > > Being able to control this can help with verifying that e.g. a
user-space
> > > > > program behaves properly even without this optional ZNS feature.
> > > > >
> > > > > The default value is set to true, in order to not change the existing
> > > > > behavior.
> > > > >
> > > > > Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
> > > > > ---
> > > > > hw/nvme/ctrl.c | 9 ++++++++-
> > > > > hw/nvme/ns.c | 2 ++
> > > > > hw/nvme/nvme.h | 1 +
> > > > > 3 files changed, 11 insertions(+), 1 deletion(-)
> > > > >
> > > > > diff --git a/hw/nvme/ctrl.c b/hw/nvme/ctrl.c
> > > > > index 40a7efcea9..d00f0297a5 100644
> > > > > --- a/hw/nvme/ctrl.c
> > > > > +++ b/hw/nvme/ctrl.c
> > > > > @@ -141,6 +141,11 @@
> > > > > *
> > > > > * zoned.cross_read=<enable RAZB, default: false>
> > > > > * Setting this property to true enables Read Across Zone
Boundaries.
> > > > > + *
> > > > > + * zoned.auto_transition=<enable auto resource management, default:
true>
> > > > > + * Indicates if zones in zone state implicitly opened can be
> > > > > + * automatically transitioned to zone state closed for
resource
> > > > > + * management purposes.
> > > > > */
> > > > >
> > > > > #include "qemu/osdep.h"
> > > > > @@ -1699,7 +1704,9 @@ static uint16_t
nvme_zrm_open_flags(NvmeNamespace *ns, NvmeZone *zone,
> > > > > /* fallthrough */
> > > > >
> > > > > case NVME_ZONE_STATE_CLOSED:
> > > > > - nvme_zrm_auto_transition_zone(ns);
> > > > > + if (ns->params.auto_transition_zones) {
> > > > > + nvme_zrm_auto_transition_zone(ns);
> > > > > + }
> > > > > status = nvme_aor_check(ns, act, 1);
> > > > > if (status) {
> > > > > return status;
> > > > > diff --git a/hw/nvme/ns.c b/hw/nvme/ns.c
> > > > > index 3fec9c6273..31dee43d30 100644
> > > > > --- a/hw/nvme/ns.c
> > > > > +++ b/hw/nvme/ns.c
> > > > > @@ -531,6 +531,8 @@ static Property nvme_ns_props[] = {
> > > > > params.max_open_zones, 0),
> > > > > DEFINE_PROP_UINT32("zoned.descr_ext_size", NvmeNamespace,
> > > > > params.zd_extension_size, 0),
> > > > > + DEFINE_PROP_BOOL("zoned.auto_transition", NvmeNamespace,
> > > > > + params.auto_transition_zones, true),
> > > > > DEFINE_PROP_END_OF_LIST(),
> > > > > };
> > > > >
> > > > > diff --git a/hw/nvme/nvme.h b/hw/nvme/nvme.h
> > > > > index 81a35cda14..bd86054db2 100644
> > > > > --- a/hw/nvme/nvme.h
> > > > > +++ b/hw/nvme/nvme.h
> > > > > @@ -100,6 +100,7 @@ typedef struct NvmeNamespaceParams {
> > > > > uint32_t max_active_zones;
> > > > > uint32_t max_open_zones;
> > > > > uint32_t zd_extension_size;
> > > > > + bool auto_transition_zones;
> > > > > } NvmeNamespaceParams;
> > > > >
> > > > > typedef struct NvmeNamespace {
> > > > > --
> > > > > 2.31.1
> > > > >
> > > >
> > > > Looks good Niklas!
> > > >
> > > > Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
> > >
> > > In reality, it is the controller that does the auto transitioning.
> > >
> > > In theory, one namespace could be attached to two different controllers,
> > > and I guess, in that case, it depends on if the controller that we used
> > > when doing the write supports auto transitioning or not, that determines
> > > if a zone will be auto transitioned or not.
> > >
> > > If we were to change this to be a parameter of the controller instead
> > > of a parameter of the namespace, we would require to refactor a lot of
> > > code in the regular write path. As we currently don't have any NvmeRequest
> > > object in nvme_zrm_open_flags().
> > >
> > > Thoughts?
> > >
> >
> > I think you are right. This should be controller-specific behavior. I took
> > the liberty of moving the parameter; the refactor is minimal.
> >
> >
> > From: Niklas Cassel <niklas.cassel@wdc.com>
> >
> > In the Zoned Namespace Command Set Specification, chapter
> > 2.5.1 Managing resources
> >
> > "The controller may transition zones in the ZSIO:Implicitly Opened state
> > to the ZSC:Closed state for resource management purposes."
> >
> > The word may in this sentence means that automatically transitioning
> > an implicitly opened zone to closed is completely optional.
> >
> > Add a new parameter so that the user can control if this automatic
> > transitioning should be performed or not.
> >
> > Being able to control this can help with verifying that e.g. a user-space
> > program behaves properly even without this optional ZNS feature.
> >
> > The default value is set to true, in order to not change the existing
> > behavior.
> >
> > Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
> > [k.jensen: moved parameter to controller]
> > Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
> > ---
> > hw/nvme/nvme.h | 1 +
> > hw/nvme/ctrl.c | 32 ++++++++++++++++++++++----------
> > 2 files changed, 23 insertions(+), 10 deletions(-)
> >
> > diff --git a/hw/nvme/nvme.h b/hw/nvme/nvme.h
> > index 81a35cda142b..93a7e0e5380e 100644
> > --- a/hw/nvme/nvme.h
> > +++ b/hw/nvme/nvme.h
> > @@ -382,6 +382,7 @@ typedef struct NvmeParams {
> > uint8_t vsl;
> > bool use_intel_id;
> > uint8_t zasl;
> > + bool auto_transition_zones;
> > bool legacy_cmb;
> > } NvmeParams;
> > diff --git a/hw/nvme/ctrl.c b/hw/nvme/ctrl.c
> > index 40a7efcea914..8dd9cb2ccbf3 100644
> > --- a/hw/nvme/ctrl.c
> > +++ b/hw/nvme/ctrl.c
> > @@ -34,6 +34,7 @@
> > * aerl=<N[optional]>,aer_max_queued=<N[optional]>, \
> > * mdts=<N[optional]>,vsl=<N[optional]>, \
> > * zoned.zasl=<N[optional]>, \
> > + * zoned.auto_transition=<on|off[optional]>, \
> > * subsys=<subsys_id>
> > * -device nvme-ns,drive=<drive_id>,bus=<bus_name>,nsid=<nsid>,\
> > * zoned=<true|false[optional]>, \
> > @@ -100,6 +101,11 @@
> > * the minimum memory page size (CAP.MPSMIN). The default value is 0
(i.e.
> > * defaulting to the value of `mdts`).
> > *
> > + * - `zoned.auto_transition`
> > + * Indicates if zones in zone state implicitly opened can be
automatically
> > + * transitioned to zone state closed for resource management purposes.
> > + * Defaults to 'on'.
> > + *
> > * nvme namespace device parameters
> > * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > * - `shared`
> > @@ -1686,8 +1692,8 @@ enum {
> > NVME_ZRM_AUTO = 1 << 0,
> > };
> > -static uint16_t nvme_zrm_open_flags(NvmeNamespace *ns, NvmeZone *zone,
> > - int flags)
> > +static uint16_t nvme_zrm_open_flags(NvmeCtrl *n, NvmeNamespace *ns,
> > + NvmeZone *zone, int flags)
> > {
> > int act = 0;
> > uint16_t status;
> > @@ -1699,7 +1705,9 @@ static uint16_t nvme_zrm_open_flags(NvmeNamespace
*ns, NvmeZone *zone,
> > /* fallthrough */
> > case NVME_ZONE_STATE_CLOSED:
> > - nvme_zrm_auto_transition_zone(ns);
> > + if (n->params.auto_transition_zones) {
> > + nvme_zrm_auto_transition_zone(ns);
> > + }
> > status = nvme_aor_check(ns, act, 1);
> > if (status) {
> > return status;
> > @@ -1735,14 +1743,16 @@ static uint16_t nvme_zrm_open_flags(NvmeNamespace
*ns, NvmeZone *zone,
> > }
> > }
> > -static inline uint16_t nvme_zrm_auto(NvmeNamespace *ns, NvmeZone *zone)
> > +static inline uint16_t nvme_zrm_auto(NvmeCtrl *n, NvmeNamespace *ns,
> > + NvmeZone *zone)
> > {
> > - return nvme_zrm_open_flags(ns, zone, NVME_ZRM_AUTO);
> > + return nvme_zrm_open_flags(n, ns, zone, NVME_ZRM_AUTO);
> > }
> > -static inline uint16_t nvme_zrm_open(NvmeNamespace *ns, NvmeZone *zone)
> > +static inline uint16_t nvme_zrm_open(NvmeCtrl *n, NvmeNamespace *ns,
> > + NvmeZone *zone)
> > {
> > - return nvme_zrm_open_flags(ns, zone, 0);
> > + return nvme_zrm_open_flags(n, ns, zone, 0);
> > }
> > static void nvme_advance_zone_wp(NvmeNamespace *ns, NvmeZone *zone,
> > @@ -2283,7 +2293,7 @@ static void nvme_copy_in_complete(NvmeRequest *req)
> > goto invalid;
> > }
> > - status = nvme_zrm_auto(ns, zone);
> > + status = nvme_zrm_auto(nvme_ctrl(req), ns, zone);
> > if (status) {
> > goto invalid;
> > }
> > @@ -3080,7 +3090,7 @@ static uint16_t nvme_do_write(NvmeCtrl *n,
NvmeRequest *req, bool append,
> > goto invalid;
> > }
> > - status = nvme_zrm_auto(ns, zone);
> > + status = nvme_zrm_auto(n, ns, zone);
> > if (status) {
> > goto invalid;
> > }
> > @@ -3169,7 +3179,7 @@ enum NvmeZoneProcessingMask {
> > static uint16_t nvme_open_zone(NvmeNamespace *ns, NvmeZone *zone,
> > NvmeZoneState state, NvmeRequest *req)
> > {
> > - return nvme_zrm_open(ns, zone);
> > + return nvme_zrm_open(nvme_ctrl(req), ns, zone);
> > }
> > static uint16_t nvme_close_zone(NvmeNamespace *ns, NvmeZone *zone,
> > @@ -6259,6 +6269,8 @@ static Property nvme_props[] = {
> > DEFINE_PROP_BOOL("use-intel-id", NvmeCtrl, params.use_intel_id, false),
> > DEFINE_PROP_BOOL("legacy-cmb", NvmeCtrl, params.legacy_cmb, false),
> > DEFINE_PROP_UINT8("zoned.zasl", NvmeCtrl, params.zasl, 0),
> > + DEFINE_PROP_BOOL("zoned.auto_transition", NvmeCtrl,
> > + params.auto_transition_zones, true),
> > DEFINE_PROP_END_OF_LIST(),
> > };
> > --
> > 2.31.1
> >
>
> Thanks a lot Klaus! I really appreciate it.
>
> My initial thought was to add a new flag in the enum where NVME_ZRM_AUTO is.
> But I think that would just make the code harder to read.
> You simply check the parameter directly, which is more obvious to the reader,
> so I think patch looks good!
>
Can I add your reviewed-by on this? :)
signature.asc