[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH] hmp: Add "calc_dirty_rate" and "info dirty_rate" cmds
From: |
Dr. David Alan Gilbert |
Subject: |
Re: [PATCH] hmp: Add "calc_dirty_rate" and "info dirty_rate" cmds |
Date: |
Tue, 8 Jun 2021 19:49:56 +0100 |
User-agent: |
Mutt/2.0.7 (2021-05-04) |
* Peter Xu (peterx@redhat.com) wrote:
> These two commands are missing when adding the QMP sister commands. Add them,
> so developers can play with them easier.
>
> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
> Cc: Juan Quintela <quintela@redhat.com>
> Cc: Leonardo Bras Soares Passos <lsoaresp@redhat.com>
> Cc: Chuan Zheng <zhengchuan@huawei.com>
> Cc: huangy81@chinatelecom.cn
> Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
> ---
> PS: I really doubt whether this is working as expected... I ran one 200MB/s
> workload inside, what I measured is 20MB/s with current algorithm... Sampling
> 512 pages out of 1G mem is not wise enough I guess, especially that assumes
> dirty workload is spread across the memories while it's normally not the
> case..
What size of address space did you dirty - was it 20MB?
Dave
> ---
> hmp-commands-info.hx | 13 +++++++++++++
> hmp-commands.hx | 14 ++++++++++++++
> include/monitor/hmp.h | 2 ++
> migration/dirtyrate.c | 43 +++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 72 insertions(+)
>
> diff --git a/hmp-commands-info.hx b/hmp-commands-info.hx
> index ab0c7aa5eea..f8a9141dd8a 100644
> --- a/hmp-commands-info.hx
> +++ b/hmp-commands-info.hx
> @@ -880,3 +880,16 @@ SRST
> ``info replay``
> Display the record/replay information: mode and the current icount.
> ERST
> +
> + {
> + .name = "dirty_rate",
> + .args_type = "",
> + .params = "",
> + .help = "show dirty rate information",
> + .cmd = hmp_info_dirty_rate,
> + },
> +
> +SRST
> + ``info dirty_rate``
> + Display the vcpu dirty rate information.
> +ERST
> diff --git a/hmp-commands.hx b/hmp-commands.hx
> index 2d21fe5ad42..4c27fb91f7d 100644
> --- a/hmp-commands.hx
> +++ b/hmp-commands.hx
> @@ -1727,3 +1727,17 @@ ERST
> .flags = "p",
> },
>
> +SRST
> +``calc_dirty_rate`` *second*
> + Start a round of dirty rate measurement with the period specified in
> *second*.
> + The result of the dirty rate measurement may be observed with ``info
> + dirty_rate`` command.
> +ERST
> +
> + {
> + .name = "calc_dirty_rate",
> + .args_type = "second:l",
> + .params = "second",
> + .help = "start a round of guest dirty rate measurement",
> + .cmd = hmp_calc_dirty_rate,
> + },
> diff --git a/include/monitor/hmp.h b/include/monitor/hmp.h
> index 605d57287ae..3baa1058e2c 100644
> --- a/include/monitor/hmp.h
> +++ b/include/monitor/hmp.h
> @@ -129,5 +129,7 @@ void hmp_info_replay(Monitor *mon, const QDict *qdict);
> void hmp_replay_break(Monitor *mon, const QDict *qdict);
> void hmp_replay_delete_break(Monitor *mon, const QDict *qdict);
> void hmp_replay_seek(Monitor *mon, const QDict *qdict);
> +void hmp_info_dirty_rate(Monitor *mon, const QDict *qdict);
> +void hmp_calc_dirty_rate(Monitor *mon, const QDict *qdict);
>
> #endif
> diff --git a/migration/dirtyrate.c b/migration/dirtyrate.c
> index ccb98147e89..382287d2912 100644
> --- a/migration/dirtyrate.c
> +++ b/migration/dirtyrate.c
> @@ -20,6 +20,9 @@
> #include "ram.h"
> #include "trace.h"
> #include "dirtyrate.h"
> +#include "monitor/hmp.h"
> +#include "monitor/monitor.h"
> +#include "qapi/qmp/qdict.h"
>
> static int CalculatingState = DIRTY_RATE_STATUS_UNSTARTED;
> static struct DirtyRateStat DirtyStat;
> @@ -424,3 +427,43 @@ struct DirtyRateInfo *qmp_query_dirty_rate(Error **errp)
> {
> return query_dirty_rate_info();
> }
> +
> +void hmp_info_dirty_rate(Monitor *mon, const QDict *qdict)
> +{
> + DirtyRateInfo *info = query_dirty_rate_info();
> +
> + monitor_printf(mon, "Status: %s\n",
> + DirtyRateStatus_str(info->status));
> + monitor_printf(mon, "Start Time: %"PRIi64" (ms)\n",
> + info->start_time);
> + monitor_printf(mon, "Period: %"PRIi64" (sec)\n",
> + info->calc_time);
> + monitor_printf(mon, "Dirty rate: ");
> + if (info->has_dirty_rate) {
> + monitor_printf(mon, "%"PRIi64" (MB/s)\n", info->dirty_rate);
> + } else {
> + monitor_printf(mon, "(not ready)\n");
> + }
> + g_free(info);
> +}
> +
> +void hmp_calc_dirty_rate(Monitor *mon, const QDict *qdict)
> +{
> + int64_t sec = qdict_get_try_int(qdict, "second", 0);
> + Error *err = NULL;
> +
> + if (!sec) {
> + monitor_printf(mon, "Incorrect period length specified!\n");
> + return;
> + }
> +
> + qmp_calc_dirty_rate(sec, &err);
> + if (err) {
> + hmp_handle_error(mon, err);
> + return;
> + }
> +
> + monitor_printf(mon, "Starting dirty rate measurement with period %"PRIi64
> + " seconds\n", sec);
> + monitor_printf(mon, "[Please use 'info dirty_rate' to check results]\n");
> +}
> --
> 2.31.1
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK