[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH 2/7] net/vmnet: add new netdevs to qapi/net
From: |
Vladislav Yaroshchuk |
Subject: |
[PATCH 2/7] net/vmnet: add new netdevs to qapi/net |
Date: |
Thu, 17 Jun 2021 17:32:41 +0300 |
Created separate netdev per each vmnet operating mode
because they use quite different settings. Especially since
macOS 11.0 (vmnet.framework API gets lots of updates)
Three new netdevs are added:
- vmnet-host
- vmnet-shared
- vmnet-bridged
Signed-off-by: Vladislav Yaroshchuk <yaroshchuk2000@gmail.com>
---
net/clients.h | 11 +++++-
net/net.c | 10 +++--
net/vmnet.c | 14 ++++++-
qapi/net.json | 100 ++++++++++++++++++++++++++++++++++++++++++++++++--
4 files changed, 126 insertions(+), 9 deletions(-)
diff --git a/net/clients.h b/net/clients.h
index ac19843aab..c9157789f2 100644
--- a/net/clients.h
+++ b/net/clients.h
@@ -64,7 +64,14 @@ int net_init_vhost_user(const Netdev *netdev, const char
*name,
int net_init_vhost_vdpa(const Netdev *netdev, const char *name,
NetClientState *peer, Error **errp);
#ifdef CONFIG_VMNET
-int net_init_vmnet(const Netdev *netdev, const char *name,
+int net_init_vmnet_host(const Netdev *netdev, const char *name,
NetClientState *peer, Error **errp);
-#endif
+
+int net_init_vmnet_shared(const Netdev *netdev, const char *name,
+ NetClientState *peer, Error **errp);
+
+int net_init_vmnet_bridged(const Netdev *netdev, const char *name,
+ NetClientState *peer, Error **errp);
+#endif /* CONFIG_VMNET */
+
#endif /* QEMU_NET_CLIENTS_H */
diff --git a/net/net.c b/net/net.c
index 645c52ef6e..87a6f96665 100644
--- a/net/net.c
+++ b/net/net.c
@@ -1002,8 +1002,10 @@ static int (* const
net_client_init_fun[NET_CLIENT_DRIVER__MAX])(
[NET_CLIENT_DRIVER_L2TPV3] = net_init_l2tpv3,
#endif
#ifdef CONFIG_VMNET
- [NET_CLIENT_DRIVER_VMNET] = net_init_vmnet,
-#endif
+ [NET_CLIENT_DRIVER_VMNET_HOST] = net_init_vmnet_host,
+ [NET_CLIENT_DRIVER_VMNET_SHARED] = net_init_vmnet_shared,
+ [NET_CLIENT_DRIVER_VMNET_BRIDGED] = net_init_vmnet_bridged,
+#endif /* CONFIG_VMNET */
};
@@ -1091,7 +1093,9 @@ void show_netdevs(void)
"vhost-vdpa",
#endif
#ifdef CONFIG_VMNET
- "vmnet",
+ "vmnet-host",
+ "vmnet-shared",
+ "vmnet-bridged",
#endif
};
diff --git a/net/vmnet.c b/net/vmnet.c
index f8b64e2a27..3f25afd7e8 100644
--- a/net/vmnet.c
+++ b/net/vmnet.c
@@ -15,7 +15,19 @@
#include <vmnet/vmnet.h>
-int net_init_vmnet(const Netdev *netdev, const char *name,
+int net_init_vmnet_host(const Netdev *netdev, const char *name,
+ NetClientState *peer, Error **errp) {
+ error_setg(errp, "vmnet is not implemented yet");
+ return -1;
+}
+
+int net_init_vmnet_shared(const Netdev *netdev, const char *name,
+ NetClientState *peer, Error **errp) {
+ error_setg(errp, "vmnet is not implemented yet");
+ return -1;
+}
+
+int net_init_vmnet_bridged(const Netdev *netdev, const char *name,
NetClientState *peer, Error **errp) {
error_setg(errp, "vmnet is not implemented yet");
return -1;
diff --git a/qapi/net.json b/qapi/net.json
index c5de234e2c..a548d7a7f4 100644
--- a/qapi/net.json
+++ b/qapi/net.json
@@ -452,6 +452,89 @@
'*vhostdev': 'str',
'*queues': 'int' } }
+##
+# @NetdevVmnetHostOptions:
+#
+# vmnet (host mode) network backend.
+#
+# Allows the vmnet interface to communicate with
+# other vmnet interfaces that are in host mode and also with the native host.
+#
+# @dhcpstart: The starting IPv4 address to use for the interface. Must be in
the
+# private IP range (RFC 1918). Must be specified along
+# with @dhcpend and @subnetmask.
+# This address is used as the gateway address. The subsequent
address
+# up to and including dhcpend are placed in the DHCP pool.
+#
+# @dhcpend: The DHCP IPv4 range end address to use for the interface. Must be
in
+# the private IP range (RFC 1918). Must be specified along
+# with @dhcpstart and @subnetmask.
+#
+# @subnetmask: The IPv4 subnet mask to use on the interface. Must be specified
+# along with @dhcpstart and @subnetmask.
+#
+#
+# Since: 6.1,
+##
+{ 'struct': 'NetdevVmnetHostOptions',
+ 'data': {
+ '*dhcpstart': 'str',
+ '*dhcpend': 'str',
+ '*subnetmask': 'str'
+ },
+ 'if': 'defined(CONFIG_VMNET)' }
+
+##
+# @NetdevVmnetSharedOptions:
+#
+# vmnet (shared mode) network backend.
+#
+# Allows traffic originating from the vmnet interface to reach the
+# Internet through a network address translator (NAT). The vmnet interface
+# can also communicate with the native host. By default, the vmnet interface
+# is able to communicate with other shared mode interfaces. If a subnet range
+# is specified, the vmnet interface can communicate with other shared mode
+# interfaces on the same subnet.
+#
+# @dhcpstart: The starting IPv4 address to use for the interface. Must be in
the
+# private IP range (RFC 1918). Must be specified along
+# with @dhcpend and @subnetmask.
+# This address is used as the gateway address. The subsequent
address
+# up to and including dhcpend are placed in the DHCP pool.
+#
+# @dhcpend: The DHCP IPv4 range end address to use for the interface. Must be
in
+# the private IP range (RFC 1918). Must be specified along
+# with @dhcpstart and @subnetmask.
+#
+# @subnetmask: The IPv4 subnet mask to use on the interface. Must be specified
+# along with @dhcpstart and @subnetmask.
+#
+#
+# Since: 6.1,
+##
+{ 'struct': 'NetdevVmnetSharedOptions',
+ 'data': {
+ '*dhcpstart': 'str',
+ '*dhcpend': 'str',
+ '*subnetmask': 'str'
+ },
+ 'if': 'defined(CONFIG_VMNET)' }
+
+##
+# @NetdevVmnetBridgedOptions:
+#
+# vmnet (bridged mode) network backend.
+#
+# Bridges the vmnet interface with a physical network interface.
+#
+# @ifname: The name of the physical interface to be bridged.
+#
+# Since: 6.1
+##
+{ 'struct': 'NetdevVmnetBridgedOptions',
+ 'data': { 'ifname': 'str' },
+ 'if': 'defined(CONFIG_VMNET)' }
+
##
# @NetClientDriver:
#
@@ -460,11 +543,16 @@
# Since: 2.7
#
# @vhost-vdpa since 5.1
-# @vmnet since 6.1
+# @vmnet-host since 6.1
+# @vmnet-shared since 6.1
+# @vmnet-bridged since 6.1
##
{ 'enum': 'NetClientDriver',
'data': [ 'none', 'nic', 'user', 'tap', 'l2tpv3', 'socket', 'vde',
- 'bridge', 'hubport', 'netmap', 'vhost-user', 'vhost-vdpa', 'vmnet'
] }
+ 'bridge', 'hubport', 'netmap', 'vhost-user', 'vhost-vdpa',
+ { 'name': 'vmnet-host', 'if': 'defined(CONFIG_VMNET)' },
+ { 'name': 'vmnet-shared', 'if': 'defined(CONFIG_VMNET)' },
+ { 'name': 'vmnet-bridged', 'if': 'defined(CONFIG_VMNET)' }] }
##
# @Netdev:
@@ -478,6 +566,9 @@
# Since: 1.2
#
# 'l2tpv3' - since 2.1
+# 'vmnet-host' - since 6.1
+# 'vmnet-shared' - since 6.1
+# 'vmnet-bridged' - since 6.1
##
{ 'union': 'Netdev',
'base': { 'id': 'str', 'type': 'NetClientDriver' },
@@ -493,7 +584,10 @@
'hubport': 'NetdevHubPortOptions',
'netmap': 'NetdevNetmapOptions',
'vhost-user': 'NetdevVhostUserOptions',
- 'vhost-vdpa': 'NetdevVhostVDPAOptions' } }
+ 'vhost-vdpa': 'NetdevVhostVDPAOptions',
+ 'vmnet-host': 'NetdevVmnetHostOptions',
+ 'vmnet-shared': 'NetdevVmnetSharedOptions',
+ 'vmnet-bridged': 'NetdevVmnetBridgedOptions' } }
##
# @RxState:
--
2.23.0
- [PATCH 0/7] Add vmnet.framework based network backend, Vladislav Yaroshchuk, 2021/06/17
- [PATCH 2/7] net/vmnet: add new netdevs to qapi/net,
Vladislav Yaroshchuk <=
- [PATCH 4/7] net/vmnet: implement shared mode (vmnet-shared), Vladislav Yaroshchuk, 2021/06/17
- [PATCH 3/7] net/vmnet: create common netdev state structure, Vladislav Yaroshchuk, 2021/06/17
- [PATCH 6/7] net/vmnet: implement bridged mode (vmnet-bridged), Vladislav Yaroshchuk, 2021/06/17
- [PATCH 7/7] net/vmnet: update qemu-options.hx, Vladislav Yaroshchuk, 2021/06/17
- [PATCH 1/7] net/vmnet: dependencies setup, initial preparations, Vladislav Yaroshchuk, 2021/06/17
- [PATCH 5/7] net/vmnet: implement host mode (vmnet-host), Vladislav Yaroshchuk, 2021/06/17