[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v5 3/7] hw/acpi/ich9: Enable ACPI PCI hot-plug
From: |
David Gibson |
Subject: |
Re: [PATCH v5 3/7] hw/acpi/ich9: Enable ACPI PCI hot-plug |
Date: |
Sat, 3 Jul 2021 12:51:21 +1000 |
On Fri, Jul 02, 2021 at 04:55:47PM +0200, Julia Suvorova wrote:
> On Thu, Jul 1, 2021 at 6:59 AM David Gibson <david@gibson.dropbear.id.au>
> wrote:
> >
> > On Thu, Jun 17, 2021 at 09:07:35PM +0200, Julia Suvorova wrote:
> > > Add acpi_pcihp to ich9_pm as part of
> > > 'acpi-pci-hotplug-with-bridge-support' option. Set default to false.
> > >
> > > Signed-off-by: Julia Suvorova <jusual@redhat.com>
> > > Reviewed-by: Igor Mammedov <imammedo@redhat.com>
> > > Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
> > > ---
> > > hw/i386/acpi-build.h | 1 +
> > > include/hw/acpi/ich9.h | 3 ++
> > > hw/acpi/ich9.c | 67 ++++++++++++++++++++++++++++++++++++++++++
> > > hw/acpi/pcihp.c | 5 +++-
> > > hw/i386/acpi-build.c | 2 +-
> > > 5 files changed, 76 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/hw/i386/acpi-build.h b/hw/i386/acpi-build.h
> > > index 487ec7710f..0dce155c8c 100644
> > > --- a/hw/i386/acpi-build.h
> > > +++ b/hw/i386/acpi-build.h
> > > @@ -10,5 +10,6 @@ extern const struct AcpiGenericAddress
> > > x86_nvdimm_acpi_dsmio;
> > > #define ACPI_PCIHP_BNMR_BASE 0x10
> > >
> > > void acpi_setup(void);
> > > +Object *acpi_get_i386_pci_host(void);
> > >
> > > #endif
> > > diff --git a/include/hw/acpi/ich9.h b/include/hw/acpi/ich9.h
> > > index 596120d97f..a329ce43ab 100644
> > > --- a/include/hw/acpi/ich9.h
> > > +++ b/include/hw/acpi/ich9.h
> > > @@ -24,6 +24,7 @@
> > > #include "hw/acpi/acpi.h"
> > > #include "hw/acpi/cpu_hotplug.h"
> > > #include "hw/acpi/cpu.h"
> > > +#include "hw/acpi/pcihp.h"
> > > #include "hw/acpi/memory_hotplug.h"
> > > #include "hw/acpi/acpi_dev_interface.h"
> > > #include "hw/acpi/tco.h"
> > > @@ -55,6 +56,8 @@ typedef struct ICH9LPCPMRegs {
> > > AcpiCpuHotplug gpe_cpu;
> > > CPUHotplugState cpuhp_state;
> > >
> > > + bool use_acpi_hotplug_bridge;
> > > + AcpiPciHpState acpi_pci_hotplug;
> > > MemHotplugState acpi_memory_hotplug;
> > >
> > > uint8_t disable_s3;
> > > diff --git a/hw/acpi/ich9.c b/hw/acpi/ich9.c
> > > index 4daa79ec8d..bcbd567cb0 100644
> > > --- a/hw/acpi/ich9.c
> > > +++ b/hw/acpi/ich9.c
> > > @@ -217,6 +217,26 @@ static const VMStateDescription vmstate_cpuhp_state
> > > = {
> > > }
> > > };
> > >
> > > +static bool vmstate_test_use_pcihp(void *opaque)
> > > +{
> > > + ICH9LPCPMRegs *s = opaque;
> > > +
> > > + return s->use_acpi_hotplug_bridge;
> > > +}
> > > +
> > > +static const VMStateDescription vmstate_pcihp_state = {
> > > + .name = "ich9_pm/pcihp",
> > > + .version_id = 1,
> > > + .minimum_version_id = 1,
> > > + .needed = vmstate_test_use_pcihp,
> > > + .fields = (VMStateField[]) {
> > > + VMSTATE_PCI_HOTPLUG(acpi_pci_hotplug,
> > > + ICH9LPCPMRegs,
> > > + NULL, NULL),
> > > + VMSTATE_END_OF_LIST()
> > > + }
> > > +};
> > > +
> > > const VMStateDescription vmstate_ich9_pm = {
> > > .name = "ich9_pm",
> > > .version_id = 1,
> > > @@ -238,6 +258,7 @@ const VMStateDescription vmstate_ich9_pm = {
> > > &vmstate_memhp_state,
> > > &vmstate_tco_io_state,
> > > &vmstate_cpuhp_state,
> > > + &vmstate_pcihp_state,
> > > NULL
> > > }
> > > };
> > > @@ -259,6 +280,7 @@ static void pm_reset(void *opaque)
> > > }
> > > pm->smi_en_wmask = ~0;
> > >
> > > + acpi_pcihp_reset(&pm->acpi_pci_hotplug, true);
> >
> > Doesn't this need to be protected by if (pm->use_acpi_hotplug_bridge)
> > ? Otherwise pm->acpi_pci_hotplug won't be initialized.
>
> Yes, you're right. Although it doesn't affect anything now, it should
> be fixed. I'll send a patch on top.
>
> > > acpi_update_sci(&pm->acpi_regs, pm->irq);
> > > }
> > >
> > > @@ -297,6 +319,18 @@ void ich9_pm_init(PCIDevice *lpc_pci, ICH9LPCPMRegs
> > > *pm,
> > > pm->enable_tco = true;
> > > acpi_pm_tco_init(&pm->tco_regs, &pm->io);
> > >
> > > + if (pm->use_acpi_hotplug_bridge) {
> > > + acpi_pcihp_init(OBJECT(lpc_pci),
> > > + &pm->acpi_pci_hotplug,
> > > + pci_get_bus(lpc_pci),
> > > + pci_address_space_io(lpc_pci),
> > > + true,
> > > + ACPI_PCIHP_ADDR_ICH9);
> > > +
> > > + qbus_set_hotplug_handler(BUS(pci_get_bus(lpc_pci)),
> > > + OBJECT(lpc_pci));
> > > + }
> > > +
> > > pm->irq = sci_irq;
> > > qemu_register_reset(pm_reset, pm);
> > > pm->powerdown_notifier.notify = pm_powerdown_req;
> > > @@ -368,6 +402,20 @@ static void ich9_pm_set_enable_tco(Object *obj, bool
> > > value, Error **errp)
> > > s->pm.enable_tco = value;
> > > }
> > >
> > > +static bool ich9_pm_get_acpi_pci_hotplug(Object *obj, Error **errp)
> > > +{
> > > + ICH9LPCState *s = ICH9_LPC_DEVICE(obj);
> > > +
> > > + return s->pm.use_acpi_hotplug_bridge;
> > > +}
> > > +
> > > +static void ich9_pm_set_acpi_pci_hotplug(Object *obj, bool value, Error
> > > **errp)
> > > +{
> > > + ICH9LPCState *s = ICH9_LPC_DEVICE(obj);
> > > +
> > > + s->pm.use_acpi_hotplug_bridge = value;
> > > +}
> > > +
> > > void ich9_pm_add_properties(Object *obj, ICH9LPCPMRegs *pm)
> > > {
> > > static const uint32_t gpe0_len = ICH9_PMIO_GPE0_LEN;
> > > @@ -376,6 +424,7 @@ void ich9_pm_add_properties(Object *obj,
> > > ICH9LPCPMRegs *pm)
> > > pm->disable_s3 = 0;
> > > pm->disable_s4 = 0;
> > > pm->s4_val = 2;
> > > + pm->use_acpi_hotplug_bridge = false;
> > >
> > > object_property_add_uint32_ptr(obj, ACPI_PM_PROP_PM_IO_BASE,
> > > &pm->pm_io_base, OBJ_PROP_FLAG_READ);
> > > @@ -399,6 +448,9 @@ void ich9_pm_add_properties(Object *obj,
> > > ICH9LPCPMRegs *pm)
> > > object_property_add_bool(obj, ACPI_PM_PROP_TCO_ENABLED,
> > > ich9_pm_get_enable_tco,
> > > ich9_pm_set_enable_tco);
> > > + object_property_add_bool(obj, "acpi-pci-hotplug-with-bridge-support",
> > > + ich9_pm_get_acpi_pci_hotplug,
> > > + ich9_pm_set_acpi_pci_hotplug);
> > > }
> > >
> > > void ich9_pm_device_pre_plug_cb(HotplugHandler *hotplug_dev, DeviceState
> > > *dev,
> > > @@ -406,6 +458,11 @@ void ich9_pm_device_pre_plug_cb(HotplugHandler
> > > *hotplug_dev, DeviceState *dev,
> > > {
> > > ICH9LPCState *lpc = ICH9_LPC_DEVICE(hotplug_dev);
> > >
> > > + if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE)) {
> > > + acpi_pcihp_device_pre_plug_cb(hotplug_dev, dev, errp);
> > > + return;
> > > + }
> > > +
> > > if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM) &&
> > > !lpc->pm.acpi_memory_hotplug.is_enabled) {
> > > error_setg(errp,
> > > @@ -441,6 +498,9 @@ void ich9_pm_device_plug_cb(HotplugHandler
> > > *hotplug_dev, DeviceState *dev,
> > > } else {
> > > acpi_cpu_plug_cb(hotplug_dev, &lpc->pm.cpuhp_state, dev,
> > > errp);
> > > }
> > > + } else if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE)) {
> > > + acpi_pcihp_device_plug_cb(hotplug_dev, &lpc->pm.acpi_pci_hotplug,
> > > + dev, errp);
> > > } else {
> > > error_setg(errp, "acpi: device plug request for not supported
> > > device"
> > > " type: %s", object_get_typename(OBJECT(dev)));
> > > @@ -473,6 +533,10 @@ void ich9_pm_device_unplug_request_cb(HotplugHandler
> > > *hotplug_dev,
> > >
> > > acpi_cpu_unplug_request_cb(hotplug_dev, &lpc->pm.cpuhp_state,
> > > dev, errp);
> > > + } else if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE)) {
> > > + acpi_pcihp_device_unplug_request_cb(hotplug_dev,
> > > + &lpc->pm.acpi_pci_hotplug,
> > > + dev, errp);
> > > } else {
> > > error_setg(errp, "acpi: device unplug request for not supported
> > > device"
> > > " type: %s", object_get_typename(OBJECT(dev)));
> > > @@ -490,6 +554,9 @@ void ich9_pm_device_unplug_cb(HotplugHandler
> > > *hotplug_dev, DeviceState *dev,
> > > } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU) &&
> > > !lpc->pm.cpu_hotplug_legacy) {
> > > acpi_cpu_unplug_cb(&lpc->pm.cpuhp_state, dev, errp);
> > > + } else if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE)) {
> > > + acpi_pcihp_device_unplug_cb(hotplug_dev,
> > > &lpc->pm.acpi_pci_hotplug,
> > > + dev, errp);
> > > } else {
> > > error_setg(errp, "acpi: device unplug for not supported device"
> > > " type: %s", object_get_typename(OBJECT(dev)));
> > > diff --git a/hw/acpi/pcihp.c b/hw/acpi/pcihp.c
> > > index a55992ed9f..5355618608 100644
> > > --- a/hw/acpi/pcihp.c
> > > +++ b/hw/acpi/pcihp.c
> > > @@ -30,6 +30,8 @@
> > > #include "hw/pci-host/i440fx.h"
> > > #include "hw/pci/pci.h"
> > > #include "hw/pci/pci_bridge.h"
> > > +#include "hw/pci/pci_host.h"
> > > +#include "hw/i386/acpi-build.h"
> > > #include "hw/acpi/acpi.h"
> > > #include "hw/pci/pci_bus.h"
> > > #include "migration/vmstate.h"
> > > @@ -103,6 +105,7 @@ static void *acpi_set_bsel(PCIBus *bus, void *opaque)
> > > static void acpi_set_pci_info(void)
> > > {
> > > static bool bsel_is_set;
> > > + Object *host = acpi_get_i386_pci_host();
> > > PCIBus *bus;
> > > unsigned bsel_alloc = ACPI_PCIHP_BSEL_DEFAULT;
> > >
> > > @@ -111,7 +114,7 @@ static void acpi_set_pci_info(void)
> > > }
> > > bsel_is_set = true;
> > >
> > > - bus = find_i440fx(); /* TODO: Q35 support */
> > > + bus = PCI_HOST_BRIDGE(host)->bus;
> >
> > Would it make more sense for this change to go in patch #1, along with
> > the similar change to acpi_pcihp_disable_root_bus().
>
> Not really. This is exactly what enables ACPI hotplug, and should be
> done with other changes here. The first patch could be merged in this
> one, though.
Ok, understood.
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
signature.asc
Description: PGP signature