qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [RFC PATCH 6/6] dp8393x: Rewrite dp8393x_get() / dp8393x_put()


From: Mark Cave-Ayland
Subject: Re: [RFC PATCH 6/6] dp8393x: Rewrite dp8393x_get() / dp8393x_put()
Date: Mon, 5 Jul 2021 07:34:57 +0100
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101 Thunderbird/78.11.0

On 05/07/2021 02:36, Finn Thain wrote:

Unfortunately I don't have a test mips64el image available to see if this
combination works for Linux. Phil, do you have a suitable test kernel and
rootfs image available to allow this to be tested?


You can build and boot a mipsel vmlinux by following the steps I described
previously. In the kernel messages you'll see the jazzsonic driver attempt
to probe the device. When it succeeds, you'll see the MAC address
reported. You can also observe the regression I reported with regards to
patch 2/6, "dp8393x: don't force 32-bit register access".

Those instructions are useful, but since I am not a MIPS developer I don't have an existing toolchain/kernel tree and rootfs available to test this.

If you can provide me with a link to your vmlinux and rootfs with busybox or similar in it, I can take a look to see what is happening here. Otherwise it's almost impossible for me to understand and debug the problem you are seeing on your setup.


ATB,

Mark.



reply via email to

[Prev in Thread] Current Thread [Next in Thread]