qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v2 5/5] migration: Move the yank unregister of channel_close


From: Dr. David Alan Gilbert
Subject: Re: [PATCH v2 5/5] migration: Move the yank unregister of channel_close out
Date: Thu, 22 Jul 2021 16:27:35 +0100
User-agent: Mutt/2.0.7 (2021-05-04)

* Peter Xu (peterx@redhat.com) wrote:
> It's efficient, but hackish to call yank unregister calls in channel_close(),
> especially it'll be hard to debug when qemu crashed with some yank function
> leaked.
> 
> Remove that hack, but instead explicitly unregister yank functions at the
> places where needed, they are:
> 
>   (on src)
>   - migrate_fd_cleanup
>   - postcopy_pause
> 
>   (on dst)
>   - migration_incoming_state_destroy
>   - postcopy_pause_incoming
> 
> Signed-off-by: Peter Xu <peterx@redhat.com>
> ---
>  migration/migration.c         |  5 +++++
>  migration/qemu-file-channel.c |  3 ---
>  migration/savevm.c            |  7 +++++++
>  migration/yank_functions.c    | 14 ++++++++++++++
>  migration/yank_functions.h    |  1 +
>  5 files changed, 27 insertions(+), 3 deletions(-)
> 
> diff --git a/migration/migration.c b/migration/migration.c
> index fa70400f98..bfeb65b8f7 100644
> --- a/migration/migration.c
> +++ b/migration/migration.c
> @@ -59,6 +59,7 @@
>  #include "multifd.h"
>  #include "qemu/yank.h"
>  #include "sysemu/cpus.h"
> +#include "yank_functions.h"
>  
>  #define MAX_THROTTLE  (128 << 20)      /* Migration transfer speed 
> throttling */
>  
> @@ -273,6 +274,7 @@ void migration_incoming_state_destroy(void)
>      }
>  
>      if (mis->from_src_file) {
> +        migration_ioc_unregister_yank_from_file(mis->from_src_file);
>          qemu_fclose(mis->from_src_file);
>          mis->from_src_file = NULL;
>      }
> @@ -1811,6 +1813,7 @@ static void migrate_fd_cleanup(MigrationState *s)
>           * Close the file handle without the lock to make sure the
>           * critical section won't block for long.
>           */
> +        migration_ioc_unregister_yank_from_file(tmp);
>          qemu_fclose(tmp);
>      }
>  
> @@ -3352,6 +3355,8 @@ static MigThrError postcopy_pause(MigrationState *s)
>  
>          /* Current channel is possibly broken. Release it. */
>          assert(s->to_dst_file);
> +        /* Unregister yank for current channel */
> +        migration_ioc_unregister_yank_from_file(s->to_dst_file);

Should this go inside the lock?

Dave

>          qemu_mutex_lock(&s->qemu_file_lock);
>          file = s->to_dst_file;
>          s->to_dst_file = NULL;
> diff --git a/migration/qemu-file-channel.c b/migration/qemu-file-channel.c
> index 2f8b1fcd46..bb5a5752df 100644
> --- a/migration/qemu-file-channel.c
> +++ b/migration/qemu-file-channel.c
> @@ -107,9 +107,6 @@ static int channel_close(void *opaque, Error **errp)
>      int ret;
>      QIOChannel *ioc = QIO_CHANNEL(opaque);
>      ret = qio_channel_close(ioc, errp);
> -    if (OBJECT(ioc)->ref == 1) {
> -        migration_ioc_unregister_yank(ioc);
> -    }
>      object_unref(OBJECT(ioc));
>      return ret;
>  }
> diff --git a/migration/savevm.c b/migration/savevm.c
> index 96b5e5d639..7b7b64bd13 100644
> --- a/migration/savevm.c
> +++ b/migration/savevm.c
> @@ -65,6 +65,7 @@
>  #include "qemu/bitmap.h"
>  #include "net/announce.h"
>  #include "qemu/yank.h"
> +#include "yank_functions.h"
>  
>  const unsigned int postcopy_ram_discard_version;
>  
> @@ -2568,6 +2569,12 @@ static bool 
> postcopy_pause_incoming(MigrationIncomingState *mis)
>      /* Clear the triggered bit to allow one recovery */
>      mis->postcopy_recover_triggered = false;
>  
> +    /*
> +     * Unregister yank with either from/to src would work, since ioc behind 
> it
> +     * is the same
> +     */
> +    migration_ioc_unregister_yank_from_file(mis->from_src_file);
> +
>      assert(mis->from_src_file);
>      qemu_file_shutdown(mis->from_src_file);
>      qemu_fclose(mis->from_src_file);
> diff --git a/migration/yank_functions.c b/migration/yank_functions.c
> index 23697173ae..8c08aef14a 100644
> --- a/migration/yank_functions.c
> +++ b/migration/yank_functions.c
> @@ -14,6 +14,7 @@
>  #include "qemu/yank.h"
>  #include "io/channel-socket.h"
>  #include "io/channel-tls.h"
> +#include "qemu-file.h"
>  
>  void migration_yank_iochannel(void *opaque)
>  {
> @@ -46,3 +47,16 @@ void migration_ioc_unregister_yank(QIOChannel *ioc)
>                                   QIO_CHANNEL(ioc));
>      }
>  }
> +
> +void migration_ioc_unregister_yank_from_file(QEMUFile *file)
> +{
> +    QIOChannel *ioc = qemu_file_get_ioc(file);
> +
> +    if (ioc) {
> +        /*
> +         * For migration qemufiles, we'll always reach here.  Though we'll 
> skip
> +         * calls from e.g. savevm/loadvm as they don't use yank.
> +         */
> +        migration_ioc_unregister_yank(ioc);
> +    }
> +}
> diff --git a/migration/yank_functions.h b/migration/yank_functions.h
> index 74c7f18c91..a7577955ed 100644
> --- a/migration/yank_functions.h
> +++ b/migration/yank_functions.h
> @@ -17,3 +17,4 @@
>  void migration_yank_iochannel(void *opaque);
>  void migration_ioc_register_yank(QIOChannel *ioc);
>  void migration_ioc_unregister_yank(QIOChannel *ioc);
> +void migration_ioc_unregister_yank_from_file(QEMUFile *file);
> -- 
> 2.31.1
> 
-- 
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK




reply via email to

[Prev in Thread] Current Thread [Next in Thread]