[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH 2/5] hw/arm/aspeed: Select console UART from machine
From: |
Cédric Le Goater |
Subject: |
Re: [PATCH 2/5] hw/arm/aspeed: Select console UART from machine |
Date: |
Sat, 28 Aug 2021 10:25:57 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101 Thunderbird/78.11.0 |
On 8/27/21 11:04 PM, pdel@fb.com wrote:
> From: Peter Delevoryas <pdel@fb.com>
>
> This change replaces the UART serial device initialization code with machine
> configuration data, making it so that we have a single code path for console
> UART initialization, but allowing different machines to use different
> UART's. This is relevant because the Aspeed chips have 2 debug UART's, UART5
> and UART1, and while most machines just use UART5, some use UART1.
I think this is controlled by SCU510. If so, we should have a different HW
strapping for the new machine and check the configuration at the SoC level,
in aspeed_ast2600.c, to change the serial initialization.
Thanks,
C.
>
> Signed-off-by: Peter Delevoryas <pdel@fb.com>
> ---
> hw/arm/aspeed.c | 7 +++++++
> hw/arm/aspeed_ast2600.c | 5 -----
> hw/arm/aspeed_soc.c | 5 -----
> include/hw/arm/aspeed.h | 1 +
> 4 files changed, 8 insertions(+), 10 deletions(-)
>
> diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
> index 9d43e26c51..ff53d12395 100644
> --- a/hw/arm/aspeed.c
> +++ b/hw/arm/aspeed.c
> @@ -14,6 +14,7 @@
> #include "hw/arm/boot.h"
> #include "hw/arm/aspeed.h"
> #include "hw/arm/aspeed_soc.h"
> +#include "hw/char/serial.h"
> #include "hw/i2c/i2c_mux_pca954x.h"
> #include "hw/i2c/smbus_eeprom.h"
> #include "hw/misc/pca9552.h"
> @@ -21,6 +22,7 @@
> #include "hw/misc/led.h"
> #include "hw/qdev-properties.h"
> #include "sysemu/block-backend.h"
> +#include "sysemu/sysemu.h"
> #include "hw/loader.h"
> #include "qemu/error-report.h"
> #include "qemu/units.h"
> @@ -352,6 +354,10 @@ static void aspeed_machine_init(MachineState *machine)
> }
> qdev_realize(DEVICE(&bmc->soc), NULL, &error_abort);
>
> + serial_mm_init(get_system_memory(), sc->memmap[amc->serial_dev], 2,
> + sc->get_irq(&bmc->soc, amc->serial_dev), 38400,
> + serial_hd(0), DEVICE_LITTLE_ENDIAN);
> +
> memory_region_add_subregion(get_system_memory(),
> sc->memmap[ASPEED_DEV_SDRAM],
> &bmc->ram_container);
> @@ -804,6 +810,7 @@ static void aspeed_machine_class_init(ObjectClass *oc,
> void *data)
> mc->no_parallel = 1;
> mc->default_ram_id = "ram";
> amc->macs_mask = ASPEED_MAC0_ON;
> + amc->serial_dev = ASPEED_DEV_UART5;
>
> aspeed_machine_class_props_init(oc);
> }
> diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c
> index 56e1adb343..a27b0de482 100644
> --- a/hw/arm/aspeed_ast2600.c
> +++ b/hw/arm/aspeed_ast2600.c
> @@ -322,11 +322,6 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev,
> Error **errp)
> sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq);
> }
>
> - /* UART - attach an 8250 to the IO space as our UART5 */
> - serial_mm_init(get_system_memory(), sc->memmap[ASPEED_DEV_UART5], 2,
> - aspeed_soc_get_irq(s, ASPEED_DEV_UART5),
> - 38400, serial_hd(0), DEVICE_LITTLE_ENDIAN);
> -
> /* I2C */
> object_property_set_link(OBJECT(&s->i2c), "dram", OBJECT(s->dram_mr),
> &error_abort);
> diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c
> index c373182299..0c09d1e5b4 100644
> --- a/hw/arm/aspeed_soc.c
> +++ b/hw/arm/aspeed_soc.c
> @@ -287,11 +287,6 @@ static void aspeed_soc_realize(DeviceState *dev, Error
> **errp)
> sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq);
> }
>
> - /* UART - attach an 8250 to the IO space as our UART5 */
> - serial_mm_init(get_system_memory(), sc->memmap[ASPEED_DEV_UART5], 2,
> - aspeed_soc_get_irq(s, ASPEED_DEV_UART5), 38400,
> - serial_hd(0), DEVICE_LITTLE_ENDIAN);
> -
> /* I2C */
> object_property_set_link(OBJECT(&s->i2c), "dram", OBJECT(s->dram_mr),
> &error_abort);
> diff --git a/include/hw/arm/aspeed.h b/include/hw/arm/aspeed.h
> index c9747b15fc..9f5b9f04d6 100644
> --- a/include/hw/arm/aspeed.h
> +++ b/include/hw/arm/aspeed.h
> @@ -38,6 +38,7 @@ struct AspeedMachineClass {
> uint32_t num_cs;
> uint32_t macs_mask;
> void (*i2c_init)(AspeedMachineState *bmc);
> + uint32_t serial_dev;
> };
>
>
>
[PATCH 2/5] hw/arm/aspeed: Select console UART from machine, pdel, 2021/08/27
- Re: [PATCH 2/5] hw/arm/aspeed: Select console UART from machine,
Cédric Le Goater <=
Re: [PATCH 2/5] hw/arm/aspeed: Select console UART from machine, Cédric Le Goater, 2021/08/31
Re: [PATCH 2/5] hw/arm/aspeed: Select console UART from machine, Andrew Jeffery, 2021/08/31
Re: [PATCH 2/5] hw/arm/aspeed: Select console UART from machine, Cédric Le Goater, 2021/08/31
Re: [PATCH 2/5] hw/arm/aspeed: Select console UART from machine, Peter Delevoryas, 2021/08/31
Re: [PATCH 2/5] hw/arm/aspeed: Select console UART from machine, Philippe Mathieu-Daudé, 2021/08/31
Re: [PATCH 2/5] hw/arm/aspeed: Select console UART from machine, Cédric Le Goater, 2021/08/31