qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v5 13/67] linux-user/host/s390: Populate host_signal.h


From: Richard Henderson
Subject: [PATCH v5 13/67] linux-user/host/s390: Populate host_signal.h
Date: Thu, 14 Oct 2021 21:09:59 -0700

Split host_signal_pc and host_signal_write out of user-exec.c.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 linux-user/host/s390/host-signal.h  | 93 ++++++++++++++++++++++++++++-
 linux-user/host/s390x/host-signal.h |  2 +-
 accel/tcg/user-exec.c               | 88 +--------------------------
 3 files changed, 94 insertions(+), 89 deletions(-)

diff --git a/linux-user/host/s390/host-signal.h 
b/linux-user/host/s390/host-signal.h
index f4b4d65031..21f59b612a 100644
--- a/linux-user/host/s390/host-signal.h
+++ b/linux-user/host/s390/host-signal.h
@@ -1 +1,92 @@
-#define HOST_SIGNAL_PLACEHOLDER
+/*
+ * host-signal.h: signal info dependent on the host architecture
+ *
+ * Copyright (C) 2021 Linaro Limited
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#ifndef S390_HOST_SIGNAL_H
+#define S390_HOST_SIGNAL_H
+
+static inline uintptr_t host_signal_pc(ucontext_t *uc)
+{
+    return uc->uc_mcontext.psw.addr;
+}
+
+static inline bool host_signal_write(siginfo_t *info, ucontext_t *uc)
+{
+    uint16_t *pinsn = (uint16_t *)host_signal_pc(uc);
+
+    /*
+     * ??? On linux, the non-rt signal handler has 4 (!) arguments instead
+     * of the normal 2 arguments.  The 4th argument contains the "Translation-
+     * Exception Identification for DAT Exceptions" from the hardware (aka
+     * "int_parm_long"), which does in fact contain the is_write value.
+     * The rt signal handler, as far as I can tell, does not give this value
+     * at all.  Not that we could get to it from here even if it were.
+     * So fall back to parsing instructions.  Treat read-modify-write ones as
+     * writes, which is not fully correct, but for tracking self-modifying code
+     * this is better than treating them as reads.  Checking si_addr page flags
+     * might be a viable improvement, albeit a racy one.
+     */
+    /* ??? This is not even close to complete.  */
+    switch (pinsn[0] >> 8) {
+    case 0x50: /* ST */
+    case 0x42: /* STC */
+    case 0x40: /* STH */
+    case 0xba: /* CS */
+    case 0xbb: /* CDS */
+        return true;
+    case 0xc4: /* RIL format insns */
+        switch (pinsn[0] & 0xf) {
+        case 0xf: /* STRL */
+        case 0xb: /* STGRL */
+        case 0x7: /* STHRL */
+            return true;
+        }
+        break;
+    case 0xc8: /* SSF format insns */
+        switch (pinsn[0] & 0xf) {
+        case 0x2: /* CSST */
+            return true;
+        }
+        break;
+    case 0xe3: /* RXY format insns */
+        switch (pinsn[2] & 0xff) {
+        case 0x50: /* STY */
+        case 0x24: /* STG */
+        case 0x72: /* STCY */
+        case 0x70: /* STHY */
+        case 0x8e: /* STPQ */
+        case 0x3f: /* STRVH */
+        case 0x3e: /* STRV */
+        case 0x2f: /* STRVG */
+            return true;
+        }
+        break;
+    case 0xeb: /* RSY format insns */
+        switch (pinsn[2] & 0xff) {
+        case 0x14: /* CSY */
+        case 0x30: /* CSG */
+        case 0x31: /* CDSY */
+        case 0x3e: /* CDSG */
+        case 0xe4: /* LANG */
+        case 0xe6: /* LAOG */
+        case 0xe7: /* LAXG */
+        case 0xe8: /* LAAG */
+        case 0xea: /* LAALG */
+        case 0xf4: /* LAN */
+        case 0xf6: /* LAO */
+        case 0xf7: /* LAX */
+        case 0xfa: /* LAAL */
+        case 0xf8: /* LAA */
+            return true;
+        }
+        break;
+    }
+    return false;
+}
+
+#endif
diff --git a/linux-user/host/s390x/host-signal.h 
b/linux-user/host/s390x/host-signal.h
index f4b4d65031..0e83f9358d 100644
--- a/linux-user/host/s390x/host-signal.h
+++ b/linux-user/host/s390x/host-signal.h
@@ -1 +1 @@
-#define HOST_SIGNAL_PLACEHOLDER
+#include "../s390/host-signal.h"
diff --git a/accel/tcg/user-exec.c b/accel/tcg/user-exec.c
index 0915eb7f95..bfd964b578 100644
--- a/accel/tcg/user-exec.c
+++ b/accel/tcg/user-exec.c
@@ -255,93 +255,7 @@ void *probe_access(CPUArchState *env, target_ulong addr, 
int size,
     return size ? g2h(env_cpu(env), addr) : NULL;
 }
 
-#if defined(__s390__)
-
-int cpu_signal_handler(int host_signum, void *pinfo,
-                       void *puc)
-{
-    siginfo_t *info = pinfo;
-    ucontext_t *uc = puc;
-    unsigned long pc;
-    uint16_t *pinsn;
-    int is_write = 0;
-
-    pc = uc->uc_mcontext.psw.addr;
-
-    /*
-     * ??? On linux, the non-rt signal handler has 4 (!) arguments instead
-     * of the normal 2 arguments.  The 4th argument contains the "Translation-
-     * Exception Identification for DAT Exceptions" from the hardware (aka
-     * "int_parm_long"), which does in fact contain the is_write value.
-     * The rt signal handler, as far as I can tell, does not give this value
-     * at all.  Not that we could get to it from here even if it were.
-     * So fall back to parsing instructions.  Treat read-modify-write ones as
-     * writes, which is not fully correct, but for tracking self-modifying code
-     * this is better than treating them as reads.  Checking si_addr page flags
-     * might be a viable improvement, albeit a racy one.
-     */
-    /* ??? This is not even close to complete.  */
-    pinsn = (uint16_t *)pc;
-    switch (pinsn[0] >> 8) {
-    case 0x50: /* ST */
-    case 0x42: /* STC */
-    case 0x40: /* STH */
-    case 0xba: /* CS */
-    case 0xbb: /* CDS */
-        is_write = 1;
-        break;
-    case 0xc4: /* RIL format insns */
-        switch (pinsn[0] & 0xf) {
-        case 0xf: /* STRL */
-        case 0xb: /* STGRL */
-        case 0x7: /* STHRL */
-            is_write = 1;
-        }
-        break;
-    case 0xc8: /* SSF format insns */
-        switch (pinsn[0] & 0xf) {
-        case 0x2: /* CSST */
-            is_write = 1;
-        }
-        break;
-    case 0xe3: /* RXY format insns */
-        switch (pinsn[2] & 0xff) {
-        case 0x50: /* STY */
-        case 0x24: /* STG */
-        case 0x72: /* STCY */
-        case 0x70: /* STHY */
-        case 0x8e: /* STPQ */
-        case 0x3f: /* STRVH */
-        case 0x3e: /* STRV */
-        case 0x2f: /* STRVG */
-            is_write = 1;
-        }
-        break;
-    case 0xeb: /* RSY format insns */
-        switch (pinsn[2] & 0xff) {
-        case 0x14: /* CSY */
-        case 0x30: /* CSG */
-        case 0x31: /* CDSY */
-        case 0x3e: /* CDSG */
-        case 0xe4: /* LANG */
-        case 0xe6: /* LAOG */
-        case 0xe7: /* LAXG */
-        case 0xe8: /* LAAG */
-        case 0xea: /* LAALG */
-        case 0xf4: /* LAN */
-        case 0xf6: /* LAO */
-        case 0xf7: /* LAX */
-        case 0xfa: /* LAAL */
-        case 0xf8: /* LAA */
-            is_write = 1;
-        }
-        break;
-    }
-
-    return handle_cpu_signal(pc, info, is_write, &uc->uc_sigmask);
-}
-
-#elif defined(__mips__)
+#if defined(__mips__)
 
 #if defined(__misp16) || defined(__mips_micromips)
 #error "Unsupported encoding"
-- 
2.25.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]