qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v2 04/22] target/riscv: Improve fidelity of guest external in


From: Alistair Francis
Subject: Re: [PATCH v2 04/22] target/riscv: Improve fidelity of guest external interrupts
Date: Tue, 19 Oct 2021 08:55:08 +1000

On Mon, Oct 18, 2021 at 10:55 PM Anup Patel <anup@brainfault.org> wrote:
>
> On Fri, Oct 15, 2021 at 11:54 AM Alistair Francis <alistair23@gmail.com> 
> wrote:
> >
> > On Thu, Sep 16, 2021 at 11:42 PM Anup Patel <anup@brainfault.org> wrote:
> > >
> > > On Wed, Sep 15, 2021 at 6:19 AM Alistair Francis <alistair23@gmail.com> 
> > > wrote:
> > > >
> > > > On Tue, Sep 14, 2021 at 2:33 AM Anup Patel <anup@brainfault.org> wrote:
> > > > >
> > > > > On Thu, Sep 9, 2021 at 12:14 PM Alistair Francis 
> > > > > <alistair23@gmail.com> wrote:
> > > > > >
> > > > > > On Thu, Sep 2, 2021 at 9:26 PM Anup Patel <anup.patel@wdc.com> 
> > > > > > wrote:
> > > > > > >
> > > > > > > The guest external interrupts for external interrupt controller 
> > > > > > > are
> > > > > > > not delivered to the guest running under hypervisor on time. This
> > > > > > > results in a guest having sluggish response to serial console 
> > > > > > > input
> > > > > > > and other I/O events. To improve timely delivery of guest external
> > > > > > > interrupts, we check and inject interrupt upon every sret 
> > > > > > > instruction.
> > > > > > >
> > > > > > > Signed-off-by: Anup Patel <anup.patel@wdc.com>
> > > > > > > ---
> > > > > > >  target/riscv/op_helper.c | 9 +++++++++
> > > > > > >  1 file changed, 9 insertions(+)
> > > > > > >
> > > > > > > diff --git a/target/riscv/op_helper.c b/target/riscv/op_helper.c
> > > > > > > index ee7c24efe7..4c995c239e 100644
> > > > > > > --- a/target/riscv/op_helper.c
> > > > > > > +++ b/target/riscv/op_helper.c
> > > > > > > @@ -129,6 +129,15 @@ target_ulong helper_sret(CPURISCVState *env, 
> > > > > > > target_ulong cpu_pc_deb)
> > > > > > >
> > > > > > >      riscv_cpu_set_mode(env, prev_priv);
> > > > > > >
> > > > > > > +    /*
> > > > > > > +     * QEMU does not promptly deliver guest external interrupts
> > > > > > > +     * to a guest running on a hypervisor which in-turn is 
> > > > > > > running
> > > > > > > +     * on QEMU. We make dummy call to riscv_cpu_update_mip() upon
> > > > > > > +     * every sret instruction so that QEMU pickup guest external
> > > > > > > +     * interrupts sooner.
> > > > > > > +     */
> > > > > > > +     riscv_cpu_update_mip(env_archcpu(env), 0, 0);
> > > > > >
> > > > > > This doesn't seem right. I don't understand why we need this?
> > > > > >
> > > > > > riscv_cpu_update_mip() is called when an interrupt is delivered to 
> > > > > > the
> > > > > > CPU, if we are missing interrupts then that is a bug somewhere else.
> > > > >
> > > > > I have finally figured out the cause of guest external interrupts 
> > > > > being
> > > > > missed by Guest/VM.
> > > > >
> > > > > The riscv_cpu_set_irq() which handles guest external interrupt lines
> > > > > of each CPU is called asynchronously. This function in-turn calls
> > > > > riscv_cpu_update_mip() but the CPU might be in host mode (V=0)
> > > > > or in Guest/VM mode (V=1). If the CPU is in host mode (V=0) when
> > > >
> > > > The IRQ being raised should just directly call riscv_cpu_update_mip()
> > > > so the IRQ should happen straight away.
> > >
> > > That's not true for guest external interrupts. The target Guest/VM might
> > > not be running on the receiving HART.
> > >
> > > Let say IMSIC injected guest external IRQ1 to HARTx which is meant
> > > for a Guest/VM, so the riscv_cpu_set_irq() will call 
> > > riscv_cpu_update_mip().
> > > If HARTx might be in HS-mode or HARTx might be running some
> > > other Guest/VM then cpu_interrupt() request queued by 
> > > riscv_cpu_update_mip()
> > > will not result in any interrupt being injected. This further means that
> > > QEMU has to check and inject guest external interrupts to target
> > > Guest/VM when HARTx makes a switch from HS-mode to VS-mode. By
> > > calling riscv_cpu_update_mip() upon SRET instruction we are ensuring
> > > that if any guest external interrupt was missed then it is injected ot
> > > VS-mode.
> >
> > Ah ok.
> >
> > So the problem is that an interrupt can occur for a guest, while that
> > guest isn't executing.
>
> Yes, that's right.
>
> >
> > So for example a CPU is executing with V=0. `riscv_cpu_update_mip()`
> > is called, which triggers a hard interrupt. That in turn calls
> > `riscv_cpu_exec_interrupt()` and `riscv_cpu_local_irq_pending()`.
>
> In this case, the hard interrupt is actually a guest external interrupt
> which is tracked via hgeip CSR. The hgeip CSR is updated immediately
> but `riscv_cpu_local_irq_pending()` might be called while V=0 hence
> no interrupt.
>
> >
> > This results in the guest Hypervisor receiving the interrupt, which it
> > then doesn't act on? Or is MIP set but `riscv_cpu_local_irq_pending()`
> > returns false due to the enable checks?
>
> Here, hgeip CSR will be set and it will be reflected in mip.VSEIP
> bit only when hypervisor schedules/runs the Guest (i.e. V=1 and
> hstatus.VGEIN pointing to the appropriate bit of hgeip csr).
>
> >
> > That either seems like a guest bug or that we need some functionality
> > in `riscv_cpu_swap_hypervisor_regs()` to trigger an interrupt on
> > context swap.
>
> This certainly is not a bug with Guest or Hypervisor but rather an
> issue of invoking `riscv_cpu_exec_interrupt()` and
> `riscv_cpu_local_irq_pending()` at the right time.
>
> Your suggestion of checking and triggering guest external interrupt
> in `riscv_cpu_swap_hypervisor_regs()` is a better approach. If you
> are okay then I will update this patch in the next revision.

Yeah, let's do that instead.

Alistair



reply via email to

[Prev in Thread] Current Thread [Next in Thread]