qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v16 3/8] [RISCV_PM] Support CSRs required for RISC-V PM exten


From: Alistair Francis
Subject: Re: [PATCH v16 3/8] [RISCV_PM] Support CSRs required for RISC-V PM extension except for the h-mode
Date: Mon, 25 Oct 2021 15:53:45 +1000

On Sat, Oct 23, 2021 at 4:34 AM Alexey Baturo <baturo.alexey@gmail.com> wrote:
>
> Signed-off-by: Alexey Baturo <space.monkey.delivers@gmail.com>
> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
> ---
>  target/riscv/cpu.c |   2 +
>  target/riscv/cpu.h |  11 ++
>  target/riscv/csr.c | 285 +++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 298 insertions(+)
>
> diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
> index 788fa0b11c..6b767a4a0b 100644
> --- a/target/riscv/cpu.c
> +++ b/target/riscv/cpu.c
> @@ -367,6 +367,8 @@ static void riscv_cpu_reset(DeviceState *dev)
>      env->mcause = 0;
>      env->pc = env->resetvec;
>      env->two_stage_lookup = false;
> +    /* mmte is supposed to have pm.current hardwired to 1 */
> +    env->mmte |= (PM_EXT_INITIAL | MMTE_M_PM_CURRENT);
>  #endif
>      cs->exception_index = RISCV_EXCP_NONE;
>      env->load_res = -1;
> diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
> index 1cfc6a53a0..b2422e3f99 100644
> --- a/target/riscv/cpu.h
> +++ b/target/riscv/cpu.h
> @@ -238,6 +238,17 @@ struct CPURISCVState {
>
>      /* True if in debugger mode.  */
>      bool debugger;
> +
> +    /*
> +     * CSRs for PointerMasking extension
> +     */
> +    target_ulong mmte;
> +    target_ulong mpmmask;
> +    target_ulong mpmbase;
> +    target_ulong spmmask;
> +    target_ulong spmbase;
> +    target_ulong upmmask;
> +    target_ulong upmbase;
>  #endif
>
>      float_status fp_status;
> diff --git a/target/riscv/csr.c b/target/riscv/csr.c
> index 69e4d65fcd..7dd7bb7fbf 100644
> --- a/target/riscv/csr.c
> +++ b/target/riscv/csr.c
> @@ -192,6 +192,16 @@ static RISCVException hmode32(CPURISCVState *env, int 
> csrno)
>
>  }
>
> +/* Checks if PointerMasking registers could be accessed */
> +static RISCVException pointer_masking(CPURISCVState *env, int csrno)
> +{
> +    /* Check if j-ext is present */
> +    if (riscv_has_ext(env, RVJ)) {
> +        return RISCV_EXCP_NONE;
> +    }
> +    return RISCV_EXCP_ILLEGAL_INST;
> +}
> +
>  static RISCVException pmp(CPURISCVState *env, int csrno)
>  {
>      if (riscv_feature(env, RISCV_FEATURE_PMP)) {
> @@ -1425,6 +1435,268 @@ static RISCVException write_pmpaddr(CPURISCVState 
> *env, int csrno,
>      return RISCV_EXCP_NONE;
>  }
>
> +/*
> + * Functions to access Pointer Masking feature registers
> + * We have to check if current priv lvl could modify
> + * csr in given mode
> + */
> +static bool check_pm_current_disabled(CPURISCVState *env, int csrno)
> +{
> +    int csr_priv = get_field(csrno, 0x300);
> +    int pm_current;
> +
> +    /*
> +     * If priv lvls differ that means we're accessing csr from higher priv 
> lvl,
> +     * so allow the access
> +     */
> +    if (env->priv != csr_priv) {
> +        return false;
> +    }
> +    switch (env->priv) {
> +    case PRV_M:
> +        pm_current = get_field(env->mmte, M_PM_CURRENT);
> +        break;
> +    case PRV_S:
> +        pm_current = get_field(env->mmte, S_PM_CURRENT);
> +        break;
> +    case PRV_U:
> +        pm_current = get_field(env->mmte, U_PM_CURRENT);
> +        break;
> +    default:
> +        g_assert_not_reached();
> +    }
> +    /* It's same priv lvl, so we allow to modify csr only if pm.current==1 */
> +    return !pm_current;
> +}
> +
> +static RISCVException read_mmte(CPURISCVState *env, int csrno,
> +                                target_ulong *val)
> +{
> +    *val = env->mmte & MMTE_MASK;
> +    return RISCV_EXCP_NONE;
> +}
> +
> +static RISCVException write_mmte(CPURISCVState *env, int csrno,
> +                                 target_ulong val)
> +{
> +    uint64_t mstatus;
> +    target_ulong wpri_val = val & MMTE_MASK;
> +
> +    if (val != wpri_val) {
> +        qemu_log_mask(LOG_GUEST_ERROR,
> +                      "MMTE: WPRI violation written 0x%lx vs expected 
> 0x%lx\n",
> +                      val, wpri_val);

This and other log messages fail to build for both RV64 and RV32.

The target_ulong can either be 32-bit or 64-bit, so printing with %lx
doesn't work. You can use TARGET_FMT_lx instead

Also, while re-sending this can you prefix the commit messages with
"target/riscv: "

Alistair

> +    }
> +    /* for machine mode pm.current is hardwired to 1 */
> +    wpri_val |= MMTE_M_PM_CURRENT;
> +
> +    /* hardwiring pm.instruction bit to 0, since it's not supported yet */
> +    wpri_val &= ~(MMTE_M_PM_INSN | MMTE_S_PM_INSN | MMTE_U_PM_INSN);
> +    env->mmte = wpri_val | PM_EXT_DIRTY;
> +
> +    /* Set XS and SD bits, since PM CSRs are dirty */
> +    mstatus = env->mstatus | MSTATUS_XS;
> +    write_mstatus(env, csrno, mstatus);
> +    return RISCV_EXCP_NONE;
> +}
> +
> +static RISCVException read_smte(CPURISCVState *env, int csrno,
> +                                target_ulong *val)
> +{
> +    *val = env->mmte & SMTE_MASK;
> +    return RISCV_EXCP_NONE;
> +}
> +
> +static RISCVException write_smte(CPURISCVState *env, int csrno,
> +                                 target_ulong val)
> +{
> +    target_ulong wpri_val = val & SMTE_MASK;
> +
> +    if (val != wpri_val) {
> +        qemu_log_mask(LOG_GUEST_ERROR,
> +                      "SMTE: WPRI violation written 0x%lx vs expected 
> 0x%lx\n",
> +                      val, wpri_val);
> +    }
> +
> +    /* if pm.current==0 we can't modify current PM CSRs */
> +    if (check_pm_current_disabled(env, csrno)) {
> +        return RISCV_EXCP_NONE;
> +    }
> +
> +    wpri_val |= (env->mmte & ~SMTE_MASK);
> +    write_mmte(env, csrno, wpri_val);
> +    return RISCV_EXCP_NONE;
> +}
> +
> +static RISCVException read_umte(CPURISCVState *env, int csrno,
> +                                target_ulong *val)
> +{
> +    *val = env->mmte & UMTE_MASK;
> +    return RISCV_EXCP_NONE;
> +}
> +
> +static RISCVException write_umte(CPURISCVState *env, int csrno,
> +                                 target_ulong val)
> +{
> +    target_ulong wpri_val = val & UMTE_MASK;
> +
> +    if (val != wpri_val) {
> +        qemu_log_mask(LOG_GUEST_ERROR,
> +                      "UMTE: WPRI violation written 0x%lx vs expected 
> 0x%lx\n",
> +                      val, wpri_val);
> +    }
> +
> +    if (check_pm_current_disabled(env, csrno)) {
> +        return RISCV_EXCP_NONE;
> +    }
> +
> +    wpri_val |= (env->mmte & ~UMTE_MASK);
> +    write_mmte(env, csrno, wpri_val);
> +    return RISCV_EXCP_NONE;
> +}
> +
> +static RISCVException read_mpmmask(CPURISCVState *env, int csrno,
> +                                   target_ulong *val)
> +{
> +    *val = env->mpmmask;
> +    return RISCV_EXCP_NONE;
> +}
> +
> +static RISCVException write_mpmmask(CPURISCVState *env, int csrno,
> +                                    target_ulong val)
> +{
> +    uint64_t mstatus;
> +
> +    env->mpmmask = val;
> +    env->mmte |= PM_EXT_DIRTY;
> +
> +    /* Set XS and SD bits, since PM CSRs are dirty */
> +    mstatus = env->mstatus | MSTATUS_XS;
> +    write_mstatus(env, csrno, mstatus);
> +    return RISCV_EXCP_NONE;
> +}
> +
> +static RISCVException read_spmmask(CPURISCVState *env, int csrno,
> +                                   target_ulong *val)
> +{
> +    *val = env->spmmask;
> +    return RISCV_EXCP_NONE;
> +}
> +
> +static RISCVException write_spmmask(CPURISCVState *env, int csrno,
> +                                    target_ulong val)
> +{
> +    uint64_t mstatus;
> +
> +    /* if pm.current==0 we can't modify current PM CSRs */
> +    if (check_pm_current_disabled(env, csrno)) {
> +        return RISCV_EXCP_NONE;
> +    }
> +    env->spmmask = val;
> +    env->mmte |= PM_EXT_DIRTY;
> +
> +    /* Set XS and SD bits, since PM CSRs are dirty */
> +    mstatus = env->mstatus | MSTATUS_XS;
> +    write_mstatus(env, csrno, mstatus);
> +    return RISCV_EXCP_NONE;
> +}
> +
> +static RISCVException read_upmmask(CPURISCVState *env, int csrno,
> +                                   target_ulong *val)
> +{
> +    *val = env->upmmask;
> +    return RISCV_EXCP_NONE;
> +}
> +
> +static RISCVException write_upmmask(CPURISCVState *env, int csrno,
> +                                    target_ulong val)
> +{
> +    uint64_t mstatus;
> +
> +    /* if pm.current==0 we can't modify current PM CSRs */
> +    if (check_pm_current_disabled(env, csrno)) {
> +        return RISCV_EXCP_NONE;
> +    }
> +    env->upmmask = val;
> +    env->mmte |= PM_EXT_DIRTY;
> +
> +    /* Set XS and SD bits, since PM CSRs are dirty */
> +    mstatus = env->mstatus | MSTATUS_XS;
> +    write_mstatus(env, csrno, mstatus);
> +    return RISCV_EXCP_NONE;
> +}
> +
> +static RISCVException read_mpmbase(CPURISCVState *env, int csrno,
> +                                   target_ulong *val)
> +{
> +    *val = env->mpmbase;
> +    return RISCV_EXCP_NONE;
> +}
> +
> +static RISCVException write_mpmbase(CPURISCVState *env, int csrno,
> +                                    target_ulong val)
> +{
> +    uint64_t mstatus;
> +
> +    env->mpmbase = val;
> +    env->mmte |= PM_EXT_DIRTY;
> +
> +    /* Set XS and SD bits, since PM CSRs are dirty */
> +    mstatus = env->mstatus | MSTATUS_XS;
> +    write_mstatus(env, csrno, mstatus);
> +    return RISCV_EXCP_NONE;
> +}
> +
> +static RISCVException read_spmbase(CPURISCVState *env, int csrno,
> +                                   target_ulong *val)
> +{
> +    *val = env->spmbase;
> +    return RISCV_EXCP_NONE;
> +}
> +
> +static RISCVException write_spmbase(CPURISCVState *env, int csrno,
> +                                    target_ulong val)
> +{
> +    uint64_t mstatus;
> +
> +    /* if pm.current==0 we can't modify current PM CSRs */
> +    if (check_pm_current_disabled(env, csrno)) {
> +        return RISCV_EXCP_NONE;
> +    }
> +    env->spmbase = val;
> +    env->mmte |= PM_EXT_DIRTY;
> +
> +    /* Set XS and SD bits, since PM CSRs are dirty */
> +    mstatus = env->mstatus | MSTATUS_XS;
> +    write_mstatus(env, csrno, mstatus);
> +    return RISCV_EXCP_NONE;
> +}
> +
> +static RISCVException read_upmbase(CPURISCVState *env, int csrno,
> +                                   target_ulong *val)
> +{
> +    *val = env->upmbase;
> +    return RISCV_EXCP_NONE;
> +}
> +
> +static RISCVException write_upmbase(CPURISCVState *env, int csrno,
> +                                    target_ulong val)
> +{
> +    uint64_t mstatus;
> +
> +    /* if pm.current==0 we can't modify current PM CSRs */
> +    if (check_pm_current_disabled(env, csrno)) {
> +        return RISCV_EXCP_NONE;
> +    }
> +    env->upmbase = val;
> +    env->mmte |= PM_EXT_DIRTY;
> +
> +    /* Set XS and SD bits, since PM CSRs are dirty */
> +    mstatus = env->mstatus | MSTATUS_XS;
> +    write_mstatus(env, csrno, mstatus);
> +    return RISCV_EXCP_NONE;
> +}
> +
>  #endif
>
>  /*
> @@ -1659,6 +1931,19 @@ riscv_csr_operations csr_ops[CSR_TABLE_SIZE] = {
>      [CSR_PMPADDR14] =  { "pmpaddr14", pmp, read_pmpaddr, write_pmpaddr },
>      [CSR_PMPADDR15] =  { "pmpaddr15", pmp, read_pmpaddr, write_pmpaddr },
>
> +    /* User Pointer Masking */
> +    [CSR_UMTE]    =    { "umte",    pointer_masking, read_umte,    
> write_umte    },
> +    [CSR_UPMMASK] =    { "upmmask", pointer_masking, read_upmmask, 
> write_upmmask },
> +    [CSR_UPMBASE] =    { "upmbase", pointer_masking, read_upmbase, 
> write_upmbase },
> +    /* Machine Pointer Masking */
> +    [CSR_MMTE]    =    { "mmte",    pointer_masking, read_mmte,    
> write_mmte    },
> +    [CSR_MPMMASK] =    { "mpmmask", pointer_masking, read_mpmmask, 
> write_mpmmask },
> +    [CSR_MPMBASE] =    { "mpmbase", pointer_masking, read_mpmbase, 
> write_mpmbase },
> +    /* Supervisor Pointer Masking */
> +    [CSR_SMTE]    =    { "smte",    pointer_masking, read_smte,    
> write_smte    },
> +    [CSR_SPMMASK] =    { "spmmask", pointer_masking, read_spmmask, 
> write_spmmask },
> +    [CSR_SPMBASE] =    { "spmbase", pointer_masking, read_spmbase, 
> write_spmbase },
> +
>      /* Performance Counters */
>      [CSR_HPMCOUNTER3]    = { "hpmcounter3",    ctr,    read_zero },
>      [CSR_HPMCOUNTER4]    = { "hpmcounter4",    ctr,    read_zero },
> --
> 2.30.2
>
>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]