[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v2 12/15] hw/nvme: Initialize capability structures for prima
From: |
Łukasz Gieryk |
Subject: |
Re: [PATCH v2 12/15] hw/nvme: Initialize capability structures for primary/secondary controllers |
Date: |
Thu, 25 Nov 2021 13:02:33 +0100 |
User-agent: |
Mutt/1.9.4 (2018-02-28) |
On Wed, Nov 24, 2021 at 03:26:30PM +0100, Łukasz Gieryk wrote:
> On Wed, Nov 24, 2021 at 09:04:31AM +0100, Klaus Jensen wrote:
> > On Nov 16 16:34, Łukasz Gieryk wrote:
> > > With four new properties:
> > > - sriov_v{i,q}_flexible,
> > > - sriov_max_v{i,q}_per_vf,
> > > one can configure the number of available flexible resources, as well as
> > > the limits. The primary and secondary controller capability structures
> > > are initialized accordingly.
> > >
> > > Since the number of available queues (interrupts) now varies between
> > > VF/PF, BAR size calculation is also adjusted.
> > >
> > > Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
> > > ---
> > > hw/nvme/ctrl.c | 138 ++++++++++++++++++++++++++++++++++++++++---
> > > hw/nvme/nvme.h | 4 ++
> > > include/block/nvme.h | 5 ++
> > > 3 files changed, 140 insertions(+), 7 deletions(-)
> > >
> > > diff --git a/hw/nvme/ctrl.c b/hw/nvme/ctrl.c
> > > index f8f5dfe204..f589ffde59 100644
> > > --- a/hw/nvme/ctrl.c
> > > +++ b/hw/nvme/ctrl.c
> > > @@ -6358,13 +6444,40 @@ static void nvme_init_state(NvmeCtrl *n)
> > > n->starttime_ms = qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL);
> > > n->aer_reqs = g_new0(NvmeRequest *, n->params.aerl + 1);
> > >
> > > - list->numcntl = cpu_to_le16(n->params.sriov_max_vfs);
> > > - for (i = 0; i < n->params.sriov_max_vfs; i++) {
> > > + list->numcntl = cpu_to_le16(max_vfs);
> > > + for (i = 0; i < max_vfs; i++) {
> > > sctrl = &list->sec[i];
> > > sctrl->pcid = cpu_to_le16(n->cntlid);
> > > }
> > >
> > > cap->cntlid = cpu_to_le16(n->cntlid);
> > > + cap->crt = NVME_CRT_VQ | NVME_CRT_VI;
> > > +
> > > + if (pci_is_vf(&n->parent_obj)) {
> > > + cap->vqprt = cpu_to_le16(1 + n->conf_ioqpairs);
> > > + } else {
> > > + cap->vqprt = cpu_to_le16(1 + n->params.max_ioqpairs -
> > > + n->params.sriov_vq_flexible);
> > > + cap->vqfrt = cpu_to_le32(n->params.sriov_vq_flexible);
> > > + cap->vqrfap = cap->vqfrt;
> > > + cap->vqgran = cpu_to_le16(NVME_VF_RES_GRANULARITY);
> > > + cap->vqfrsm = n->params.sriov_max_vq_per_vf ?
> > > + cpu_to_le16(n->params.sriov_max_vq_per_vf) :
> > > + cap->vqprt;
> >
> > That this defaults to VQPRT doesn't seem right. It should default to
> > VQFRT. Does not make sense to report a maximum number of assignable
> > flexible resources that are bigger than the number of flexible resources
> > available.
>
> I’ve explained in on of v1 threads why I think using the current default
> is better than VQPRT.
>
> What you’ve noticed is indeed an inconvenience, but it’s – at least in
> my opinion – part of the design. What matters is the current number of
> unassigned flexible resources. It may be lower than VQFRSM due to
> multiple reasons:
> 1) resources are bound to PF,
> 2) resources are bound to other VFs,
> 3) resources simply don’t exist (not baked in silicone: VQFRT < VQFRSM).
>
> If 1) and 2) are allowed to happen, and the user must be aware of that,
> then why 3) shouldn’t?
>
I’ve done some more thinking, and now I’m not happy with my version, nor
the suggested VQPRT.
How about using this formula instead?:
v{q,i}frsm = sriov_max_v{I,q}_per_vf ? sriov_max_v{I,q}_per_vf :
floor(sriov_v{i,q}_flexible / sriov_max_vfs)
v{q,i}frsm would end up with values similar/proportional to those
reported by and actual SR-IOV-capable device available on the market.
- [PATCH v2 08/15] hw/nvme: Implement the Function Level Reset, (continued)
- [PATCH v2 08/15] hw/nvme: Implement the Function Level Reset, Łukasz Gieryk, 2021/11/16
- [PATCH v2 09/15] hw/nvme: Make max_ioqpairs and msix_qsize configurable in runtime, Łukasz Gieryk, 2021/11/16
- [PATCH v2 10/15] hw/nvme: Remove reg_size variable and update BAR0 size calculation, Łukasz Gieryk, 2021/11/16
- [PATCH v2 03/15] pcie: Add helpers to the SR/IOV API, Łukasz Gieryk, 2021/11/16
- [PATCH v2 11/15] hw/nvme: Calculate BAR attributes in a function, Łukasz Gieryk, 2021/11/16
- [PATCH v2 12/15] hw/nvme: Initialize capability structures for primary/secondary controllers, Łukasz Gieryk, 2021/11/16
- [PATCH v2 14/15] docs: Add documentation for SR-IOV and Virtualization Enhancements, Łukasz Gieryk, 2021/11/16
- [PATCH v2 15/15] hw/nvme: Update the initalization place for the AER queue, Łukasz Gieryk, 2021/11/16
- [PATCH v2 13/15] hw/nvme: Add support for the Virtualization Management command, Łukasz Gieryk, 2021/11/16
- Re: [PATCH v2 00/15] hw/nvme: SR-IOV with Virtualization Enhancements, Klaus Jensen, 2021/11/24