qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v2] Move the libssh setup from configure to meson.build


From: Richard W.M. Jones
Subject: Re: [PATCH v2] Move the libssh setup from configure to meson.build
Date: Thu, 9 Dec 2021 15:22:30 +0000
User-agent: Mutt/1.5.21 (2010-09-15)

On Thu, Dec 09, 2021 at 04:08:24PM +0100, Thomas Huth wrote:
> On 09/12/2021 15.55, Richard W.M. Jones wrote:
> >On Thu, Dec 09, 2021 at 03:48:01PM +0100, Thomas Huth wrote:
> >>It's easier to do this in meson.build now.
> >>
> >>Signed-off-by: Thomas Huth <thuth@redhat.com>
> >>---
> >>  v2: Added the missing "config_host_data.set('CONFIG_LIBSSH', 
> >> libssh.found())"
> >>
> >>  configure                     | 27 ---------------------------
> >>  meson.build                   | 13 +++++++++----
> >>  meson_options.txt             |  2 ++
> >>  scripts/meson-buildoptions.sh |  3 +++
> >>  4 files changed, 14 insertions(+), 31 deletions(-)
> >>
> >>diff --git a/configure b/configure
> >>index 48c21775f3..bb99a40ed0 100755
> >>--- a/configure
> >>+++ b/configure
> >>@@ -344,7 +344,6 @@ debug_stack_usage="no"
> >>  crypto_afalg="no"
> >>  tls_priority="NORMAL"
> >>  tpm="$default_feature"
> >>-libssh="$default_feature"
> >>  live_block_migration=${default_feature:-yes}
> >>  numa="$default_feature"
> >>  replication=${default_feature:-yes}
> >>@@ -1078,10 +1077,6 @@ for opt do
> >>    ;;
> >>    --enable-tpm) tpm="yes"
> >>    ;;
> >>-  --disable-libssh) libssh="no"
> >>-  ;;
> >>-  --enable-libssh) libssh="yes"
> >>-  ;;
> >>    --disable-live-block-migration) live_block_migration="no"
> >>    ;;
> >>    --enable-live-block-migration) live_block_migration="yes"
> >>@@ -1448,7 +1443,6 @@ cat << EOF
> >>    live-block-migration   Block migration in the main migration stream
> >>    coroutine-pool  coroutine freelist (better performance)
> >>    tpm             TPM support
> >>-  libssh          ssh block device support
> >>    numa            libnuma support
> >>    avx2            AVX2 optimization support
> >>    avx512f         AVX512F optimization support
> >>@@ -2561,21 +2555,6 @@ if test "$modules" = yes; then
> >>      fi
> >>  fi
> >>-##########################################
> >>-# libssh probe
> >>-if test "$libssh" != "no" ; then
> >>-  if $pkg_config --exists "libssh >= 0.8.7"; then
> >>-    libssh_cflags=$($pkg_config libssh --cflags)
> >>-    libssh_libs=$($pkg_config libssh --libs)
> >>-    libssh=yes
> >>-  else
> >>-    if test "$libssh" = "yes" ; then
> >>-      error_exit "libssh required for --enable-libssh"
> >>-    fi
> >>-    libssh=no
> >>-  fi
> >>-fi
> >>-
> >>  ##########################################
> >>  # TPM emulation is only on POSIX
> >>@@ -3636,12 +3615,6 @@ if test "$cmpxchg128" = "yes" ; then
> >>    echo "CONFIG_CMPXCHG128=y" >> $config_host_mak
> >>  fi
> >>-if test "$libssh" = "yes" ; then
> >>-  echo "CONFIG_LIBSSH=y" >> $config_host_mak
> >>-  echo "LIBSSH_CFLAGS=$libssh_cflags" >> $config_host_mak
> >>-  echo "LIBSSH_LIBS=$libssh_libs" >> $config_host_mak
> >>-fi
> >>-
> >>  if test "$live_block_migration" = "yes" ; then
> >>    echo "CONFIG_LIVE_BLOCK_MIGRATION=y" >> $config_host_mak
> >>  fi
> >>diff --git a/meson.build b/meson.build
> >>index 96de1a6ef9..ae67ca28ab 100644
> >>--- a/meson.build
> >>+++ b/meson.build
> >>@@ -874,11 +874,15 @@ if not get_option('glusterfs').auto() or have_block
> >>      ''', dependencies: glusterfs)
> >>    endif
> >>  endif
> >>+
> >>  libssh = not_found
> >>-if 'CONFIG_LIBSSH' in config_host
> >>-  libssh = declare_dependency(compile_args: 
> >>config_host['LIBSSH_CFLAGS'].split(),
> >>-                              link_args: 
> >>config_host['LIBSSH_LIBS'].split())
> >>+if not get_option('libssh').auto() or have_block
> >>+  libssh = dependency('libssh', version: '>=0.8.7',
> >>+                    method: 'pkg-config',
> >>+                    required: get_option('libssh'),
> >>+                    kwargs: static_kwargs)
> >>  endif
> >>+
> >>  libbzip2 = not_found
> >>  if not get_option('bzip2').auto() or have_block
> >>    libbzip2 = cc.find_library('bz2', has_headers: ['bzlib.h'],
> >>@@ -1451,6 +1455,7 @@ config_host_data.set('CONFIG_EBPF', libbpf.found())
> >>  config_host_data.set('CONFIG_LIBDAXCTL', libdaxctl.found())
> >>  config_host_data.set('CONFIG_LIBISCSI', libiscsi.found())
> >>  config_host_data.set('CONFIG_LIBNFS', libnfs.found())
> >>+config_host_data.set('CONFIG_LIBSSH', libssh.found())
> >>  config_host_data.set('CONFIG_LINUX_AIO', libaio.found())
> >>  config_host_data.set('CONFIG_LINUX_IO_URING', linux_io_uring.found())
> >>  config_host_data.set('CONFIG_LIBPMEM', libpmem.found())
> >>@@ -3430,7 +3435,7 @@ endif
> >>  summary_info += {'seccomp support':   seccomp}
> >>  summary_info += {'GlusterFS support': glusterfs}
> >>  summary_info += {'TPM support':       config_host.has_key('CONFIG_TPM')}
> >>-summary_info += {'libssh support':    config_host.has_key('CONFIG_LIBSSH')}
> >>+summary_info += {'libssh support':    libssh}
> >>  summary_info += {'lzo support':       lzo}
> >>  summary_info += {'snappy support':    snappy}
> >>  summary_info += {'bzip2 support':     libbzip2}
> >>diff --git a/meson_options.txt b/meson_options.txt
> >>index e392323732..4114bfcaa4 100644
> >>--- a/meson_options.txt
> >>+++ b/meson_options.txt
> >>@@ -105,6 +105,8 @@ option('libdaxctl', type : 'feature', value : 'auto',
> >>         description: 'libdaxctl support')
> >>  option('libpmem', type : 'feature', value : 'auto',
> >>         description: 'libpmem support')
> >>+option('libssh', type : 'feature', value : 'auto',
> >>+       description: 'ssh block device support')
> >>  option('libudev', type : 'feature', value : 'auto',
> >>         description: 'Use libudev to enumerate host devices')
> >>  option('libusb', type : 'feature', value : 'auto',
> >>diff --git a/scripts/meson-buildoptions.sh b/scripts/meson-buildoptions.sh
> >>index 7a17ff4218..ae8f18edc2 100644
> >>--- a/scripts/meson-buildoptions.sh
> >>+++ b/scripts/meson-buildoptions.sh
> >>@@ -53,6 +53,7 @@ meson_options_help() {
> >>    printf "%s\n" '  libiscsi        libiscsi userspace initiator'
> >>    printf "%s\n" '  libnfs          libnfs block device driver'
> >>    printf "%s\n" '  libpmem         libpmem support'
> >>+  printf "%s\n" '  libssh          ssh block device support'
> >>    printf "%s\n" '  libudev         Use libudev to enumerate host devices'
> >>    printf "%s\n" '  libusb          libusb support for USB passthrough'
> >>    printf "%s\n" '  libxml2         libxml2 support for Parallels image 
> >> format'
> >>@@ -177,6 +178,8 @@ _meson_option_parse() {
> >>      --disable-libnfs) printf "%s" -Dlibnfs=disabled ;;
> >>      --enable-libpmem) printf "%s" -Dlibpmem=enabled ;;
> >>      --disable-libpmem) printf "%s" -Dlibpmem=disabled ;;
> >>+    --enable-libssh) printf "%s" -Dlibssh=enabled ;;
> >>+    --disable-libssh) printf "%s" -Dlibssh=disabled ;;
> >>      --enable-libudev) printf "%s" -Dlibudev=enabled ;;
> >>      --disable-libudev) printf "%s" -Dlibudev=disabled ;;
> >>      --enable-libusb) printf "%s" -Dlibusb=enabled ;;
> >
> >Seems reasonable, ACK.
> 
> Thanks!
> 
> >I should say that my interest in the ssh driver in qemu is not that
> >much these days.  I've been telling people to use nbdkit-ssh-plugin
> >instead.  It's more featureful and running it in a separate process is
> >probably safer too.
> 
> Then it's maybe time to deprecate the ssh driver in QEMU?

Weeeellllll ...  I didn't necessarily want to say that.  Others may be
using it, and deprecating working software causes trouble for some.
But I'll let others have their say on this.

I will mention that RHEL 9.1 will replace qemu's curl and ssh drivers
with nbdkit-curl-plugin and nbdkit-ssh-plugin.  For RHEL users this
should happen transparently.  Libvirt will substitute an external
nbdkit process when it sees the appropriate <disk> in the XML (all
RHEL users are required to use libvirt instead of qemu directly).  Of
course qemu doesn't need to care about what RHEL does, this is just
for your information.

https://bugzilla.redhat.com/show_bug.cgi?id=2016527

Rich.

-- 
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
libguestfs lets you edit virtual machines.  Supports shell scripting,
bindings from many languages.  http://libguestfs.org




reply via email to

[Prev in Thread] Current Thread [Next in Thread]