Re: [PATCH 10/12] s390x/pci: use I/O Address Translation assist when int

qemu-devel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH 10/12] s390x/pci: use I/O Address Translation assist when int

From:	Pierre Morel
Subject:	Re: [PATCH 10/12] s390x/pci: use I/O Address Translation assist when interpreting
Date:	Thu, 16 Dec 2021 09:03:51 +0100
User-agent:	Mozilla/5.0 (X11; Linux x86_64; rv:91.0) Gecko/20100101 Thunderbird/91.2.0



On 12/7/21 22:04, Matthew Rosato wrote:

Allow the underlying kvm host to handle the Refresh PCI Translation
instruction intercepts.

Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
---
  hw/s390x/s390-pci-bus.c          |  6 ++--
  hw/s390x/s390-pci-inst.c         | 51 ++++++++++++++++++++++++++++++--
  hw/s390x/s390-pci-vfio.c         | 33 +++++++++++++++++++++
  include/hw/s390x/s390-pci-inst.h |  2 +-
  include/hw/s390x/s390-pci-vfio.h | 10 +++++++
  5 files changed, 95 insertions(+), 7 deletions(-)

diff --git a/hw/s390x/s390-pci-bus.c b/hw/s390x/s390-pci-bus.c
index 1ae8792a26..ab442f17fb 100644
--- a/hw/s390x/s390-pci-bus.c
+++ b/hw/s390x/s390-pci-bus.c
@@ -196,7 +196,7 @@ void s390_pci_sclp_deconfigure(SCCB *sccb)
              pci_dereg_irqs(pbdev);
          }
          if (pbdev->iommu->enabled) {
-            pci_dereg_ioat(pbdev->iommu);
+            pci_dereg_ioat(pbdev);
          }
          pbdev->state = ZPCI_FS_STANDBY;
          rc = SCLP_RC_NORMAL_COMPLETION;
@@ -1261,7 +1261,7 @@ static void s390_pcihost_reset(DeviceState *dev)
                  pci_dereg_irqs(pbdev);
              }
              if (pbdev->iommu->enabled) {
-                pci_dereg_ioat(pbdev->iommu);
+                pci_dereg_ioat(pbdev);
              }
              pbdev->state = ZPCI_FS_STANDBY;
              s390_pci_perform_unplug(pbdev);
@@ -1402,7 +1402,7 @@ static void s390_pci_device_reset(DeviceState *dev)
          pci_dereg_irqs(pbdev);
      }
      if (pbdev->iommu->enabled) {
-        pci_dereg_ioat(pbdev->iommu);
+        pci_dereg_ioat(pbdev);
      }

fmb_timer_free(pbdev);

diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c
index 02093e82f9..598e5a5d52 100644
--- a/hw/s390x/s390-pci-inst.c
+++ b/hw/s390x/s390-pci-inst.c
@@ -978,6 +978,24 @@ int pci_dereg_irqs(S390PCIBusDevice *pbdev)
      return 0;
  }

+static int reg_ioat_interp(S390PCIBusDevice *pbdev, uint64_t iota)

+{
+    int rc;
+
+    rc = s390_pci_probe_ioat(pbdev);
+    if (rc) {
+        return rc;
+    }
+
+    rc = s390_pci_set_ioat(pbdev, iota);
+    if (rc) {
+        return rc;
+    }
+
+    pbdev->iommu->enabled = true;
+    return 0;
+}
+
  static int reg_ioat(CPUS390XState *env, S390PCIBusDevice *pbdev, ZpciFib fib,
                      uintptr_t ra)
  {
@@ -995,6 +1013,16 @@ static int reg_ioat(CPUS390XState *env, S390PCIBusDevice 
*pbdev, ZpciFib fib,
          return -EINVAL;
      }

+ /* If this is an interpreted device, we must use the IOAT assist */

+    if (pbdev->interp) {
+        if (reg_ioat_interp(pbdev, g_iota)) {
+            error_report("failure starting ioat assist");
+            s390_program_interrupt(env, PGM_OPERAND, ra);
+            return -EINVAL;
+        }
+        return 0;
+    }
+
      /* currently we only support designation type 1 with translation */
      if (!(dt == ZPCI_IOTA_RTTO && t)) {
          error_report("unsupported ioat dt %d t %d", dt, t);
@@ -1011,8 +1039,25 @@ static int reg_ioat(CPUS390XState *env, S390PCIBusDevice 
*pbdev, ZpciFib fib,
      return 0;
  }

-void pci_dereg_ioat(S390PCIIOMMU *iommu)

+static void dereg_ioat_interp(S390PCIBusDevice *pbdev)
  {
+    if (s390_pci_probe_ioat(pbdev) != 0) {
+        return;
+    }
+
+    s390_pci_set_ioat(pbdev, 0);
+    pbdev->iommu->enabled = false;
+}
+
+void pci_dereg_ioat(S390PCIBusDevice *pbdev)
+{
+    S390PCIIOMMU *iommu = pbdev->iommu;
+
+    if (pbdev->interp) {
+        dereg_ioat_interp(pbdev);
+        return;
+    }
+
      s390_pci_iommu_disable(iommu);
      iommu->pba = 0;
      iommu->pal = 0;
@@ -1251,7 +1296,7 @@ int mpcifc_service_call(S390CPU *cpu, uint8_t r1, 
uint64_t fiba, uint8_t ar,
              cc = ZPCI_PCI_LS_ERR;
              s390_set_status_code(env, r1, ZPCI_MOD_ST_SEQUENCE);
          } else {
-            pci_dereg_ioat(pbdev->iommu);
+            pci_dereg_ioat(pbdev);
          }
          break;
      case ZPCI_MOD_FC_REREG_IOAT:
@@ -1262,7 +1307,7 @@ int mpcifc_service_call(S390CPU *cpu, uint8_t r1, 
uint64_t fiba, uint8_t ar,
              cc = ZPCI_PCI_LS_ERR;
              s390_set_status_code(env, r1, ZPCI_MOD_ST_SEQUENCE);
          } else {
-            pci_dereg_ioat(pbdev->iommu);
+            pci_dereg_ioat(pbdev);
              if (reg_ioat(env, pbdev, fib, ra)) {
                  cc = ZPCI_PCI_LS_ERR;
                  s390_set_status_code(env, r1, ZPCI_MOD_ST_INSUF_RES);
diff --git a/hw/s390x/s390-pci-vfio.c b/hw/s390x/s390-pci-vfio.c
index 6f9271df87..6fc03a858a 100644
--- a/hw/s390x/s390-pci-vfio.c
+++ b/hw/s390x/s390-pci-vfio.c
@@ -240,6 +240,39 @@ int s390_pci_get_aif(S390PCIBusDevice *pbdev, bool enable, 
bool assist)
      return rc;
  }

+int s390_pci_probe_ioat(S390PCIBusDevice *pbdev)

+{
+    VFIOPCIDevice *vdev = container_of(pbdev->pdev, VFIOPCIDevice, pdev);
+    struct vfio_device_feature feat = {
+        .argsz = sizeof(struct vfio_device_feature),
+        .flags = VFIO_DEVICE_FEATURE_PROBE + VFIO_DEVICE_FEATURE_ZPCI_IOAT
+    };
+
+    assert(vdev);
+
+    return ioctl(vdev->vbasedev.fd, VFIO_DEVICE_FEATURE, &feat);
+}
+
+int s390_pci_set_ioat(S390PCIBusDevice *pbdev, uint64_t iota)
+{
+    VFIOPCIDevice *vdev = container_of(pbdev->pdev, VFIOPCIDevice, pdev);
+    g_autofree struct vfio_device_feature *feat;
+    struct vfio_device_zpci_ioat *data;
+    int size;
+
+    assert(vdev);


Same comment as Thomas in the previous patch.

+
+    size = sizeof(*feat) + sizeof(*data);
+    feat = g_malloc0(size);
+    feat->argsz = size;
+    feat->flags = VFIO_DEVICE_FEATURE_SET + VFIO_DEVICE_FEATURE_ZPCI_IOAT;
+
+    data = (struct vfio_device_zpci_ioat *)&feat->data;
+    data->iota = iota;
+
+    return ioctl(vdev->vbasedev.fd, VFIO_DEVICE_FEATURE, feat);
+}
+
  static void s390_pci_read_base(S390PCIBusDevice *pbdev,
                                 struct vfio_device_info *info)
  {
diff --git a/include/hw/s390x/s390-pci-inst.h b/include/hw/s390x/s390-pci-inst.h
index a55c448aad..13566fb7b4 100644
--- a/include/hw/s390x/s390-pci-inst.h
+++ b/include/hw/s390x/s390-pci-inst.h
@@ -99,7 +99,7 @@ typedef struct ZpciFib {
  } QEMU_PACKED ZpciFib;

int pci_dereg_irqs(S390PCIBusDevice *pbdev);

-void pci_dereg_ioat(S390PCIIOMMU *iommu);
+void pci_dereg_ioat(S390PCIBusDevice *pbdev);
  int clp_service_call(S390CPU *cpu, uint8_t r2, uintptr_t ra);
  int pcilg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2, uintptr_t ra);
  int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2, uintptr_t ra);
diff --git a/include/hw/s390x/s390-pci-vfio.h b/include/hw/s390x/s390-pci-vfio.h
index 6cec38a863..e7a2d8ff77 100644
--- a/include/hw/s390x/s390-pci-vfio.h
+++ b/include/hw/s390x/s390-pci-vfio.h
@@ -28,6 +28,8 @@ int s390_pci_probe_aif(S390PCIBusDevice *pbdev);
  int s390_pci_set_aif(S390PCIBusDevice *pbdev, ZpciFib *fib, bool enable,
                       bool assist);
  int s390_pci_get_aif(S390PCIBusDevice *pbdev, bool enable, bool assist);
+int s390_pci_probe_ioat(S390PCIBusDevice *pbdev);
+int s390_pci_set_ioat(S390PCIBusDevice *pbdev, uint64_t iota);

void s390_pci_get_clp_info(S390PCIBusDevice *pbdev);

  #else
@@ -68,6 +70,14 @@ static inline int s390_pci_get_aif(S390PCIBusDevice *pbdev, 
bool enable,
  {
      return -EINVAL;
  }
+static inline int s390_pci_probe_ioat(S390PCIBusDevice *pbdev)
+{
+    return -EINVAL;
+}
+static inline int s390_pci_set_ioat(S390PCIBusDevice *pbdev, uint64_t iota)
+{
+    return -EINVAL;
+}
  static inline void s390_pci_get_clp_info(S390PCIBusDevice *pbdev) { }
  #endif


LGTM
With the change

Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>


--
Pierre Morel
IBM Lab Boeblingen

[Prev in Thread]

Current Thread

[Next in Thread]

Re: [PATCH 07/12] s390x/pci: enable for load/store intepretation, (continued)
- [PATCH 08/12] s390x/pci: don't fence interpreted devices without MSI-X, Matthew Rosato, 2021/12/07
  - Re: [PATCH 08/12] s390x/pci: don't fence interpreted devices without MSI-X, Thomas Huth, 2021/12/08
  - Re: [PATCH 08/12] s390x/pci: don't fence interpreted devices without MSI-X, Pierre Morel, 2021/12/15
- [PATCH 09/12] s390x/pci: enable adapter event notification for interpreted devices, Matthew Rosato, 2021/12/07
  - Re: [PATCH 09/12] s390x/pci: enable adapter event notification for interpreted devices, Thomas Huth, 2021/12/08
    - Re: [PATCH 09/12] s390x/pci: enable adapter event notification for interpreted devices, Matthew Rosato, 2021/12/08
- [PATCH 11/12] s390x/pci: use dtsm provided from vfio capabilities for interpreted devices, Matthew Rosato, 2021/12/07
  - Re: [PATCH 11/12] s390x/pci: use dtsm provided from vfio capabilities for interpreted devices, Pierre Morel, 2021/12/15
- [PATCH 10/12] s390x/pci: use I/O Address Translation assist when interpreting, Matthew Rosato, 2021/12/07
  - Re: [PATCH 10/12] s390x/pci: use I/O Address Translation assist when interpreting, Pierre Morel <=
- [PATCH 12/12] s390x/pci: let intercept devices have separate PCI groups, Matthew Rosato, 2021/12/07
  - Re: [PATCH 12/12] s390x/pci: let intercept devices have separate PCI groups, Pierre Morel, 2021/12/16
    - Re: [PATCH 12/12] s390x/pci: let intercept devices have separate PCI groups, Matthew Rosato, 2021/12/16
    - Re: [PATCH 12/12] s390x/pci: let intercept devices have separate PCI groups, Pierre Morel, 2021/12/17
- Re: [PATCH 00/12] s390x/pci: zPCI interpretation support, Pierre Morel, 2021/12/15
  - Re: [PATCH 00/12] s390x/pci: zPCI interpretation support, Matthew Rosato, 2021/12/15
    - Re: [PATCH 00/12] s390x/pci: zPCI interpretation support, Christian Borntraeger, 2021/12/17

Prev by Date: [Bug 1749393] Re: sbrk() not working under qemu-user with a PIE-compiled binary?
Next by Date: Re: [PATCH 12/12] s390x/pci: let intercept devices have separate PCI groups
Previous by thread: [PATCH 10/12] s390x/pci: use I/O Address Translation assist when interpreting
Next by thread: [PATCH 12/12] s390x/pci: let intercept devices have separate PCI groups
Index(es):
- Date
- Thread