qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PULL v2 19/24] ACPI ERST: build the ACPI ERST table


From: Michael S. Tsirkin
Subject: [PULL v2 19/24] ACPI ERST: build the ACPI ERST table
Date: Sun, 6 Feb 2022 04:38:36 -0500

From: Eric DeVolder <eric.devolder@oracle.com>

This builds the ACPI ERST table to inform OSPM how to communicate
with the acpi-erst device.

Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-7-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 hw/acpi/erst.c | 211 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 211 insertions(+)

diff --git a/hw/acpi/erst.c b/hw/acpi/erst.c
index 8a691cb5fe..c0a23cf467 100644
--- a/hw/acpi/erst.c
+++ b/hw/acpi/erst.c
@@ -55,6 +55,27 @@
 #define STATUS_RECORD_STORE_EMPTY     0x04
 #define STATUS_RECORD_NOT_FOUND       0x05
 
+/* ACPI 4.0: Table 17-19 Serialization Instructions */
+#define INST_READ_REGISTER                 0x00
+#define INST_READ_REGISTER_VALUE           0x01
+#define INST_WRITE_REGISTER                0x02
+#define INST_WRITE_REGISTER_VALUE          0x03
+#define INST_NOOP                          0x04
+#define INST_LOAD_VAR1                     0x05
+#define INST_LOAD_VAR2                     0x06
+#define INST_STORE_VAR1                    0x07
+#define INST_ADD                           0x08
+#define INST_SUBTRACT                      0x09
+#define INST_ADD_VALUE                     0x0A
+#define INST_SUBTRACT_VALUE                0x0B
+#define INST_STALL                         0x0C
+#define INST_STALL_WHILE_TRUE              0x0D
+#define INST_SKIP_NEXT_INSTRUCTION_IF_TRUE 0x0E
+#define INST_GOTO                          0x0F
+#define INST_SET_SRC_ADDRESS_BASE          0x10
+#define INST_SET_DST_ADDRESS_BASE          0x11
+#define INST_MOVE_DATA                     0x12
+
 /* UEFI 2.1: Appendix N Common Platform Error Record */
 #define UEFI_CPER_RECORD_MIN_SIZE 128U
 #define UEFI_CPER_RECORD_LENGTH_OFFSET 20U
@@ -166,6 +187,196 @@ typedef struct {
 
 } ERSTDeviceState;
 
+/*******************************************************************/
+/*******************************************************************/
+typedef struct {
+    GArray *table_data;
+    pcibus_t bar;
+    uint8_t instruction;
+    uint8_t flags;
+    uint8_t register_bit_width;
+    pcibus_t register_offset;
+} BuildSerializationInstructionEntry;
+
+/* ACPI 4.0: 17.4.1.2 Serialization Instruction Entries */
+static void build_serialization_instruction(
+    BuildSerializationInstructionEntry *e,
+    uint8_t serialization_action,
+    uint64_t value)
+{
+    /* ACPI 4.0: Table 17-18 Serialization Instruction Entry */
+    struct AcpiGenericAddress gas;
+    uint64_t mask;
+
+    /* Serialization Action */
+    build_append_int_noprefix(e->table_data, serialization_action, 1);
+    /* Instruction */
+    build_append_int_noprefix(e->table_data, e->instruction, 1);
+    /* Flags */
+    build_append_int_noprefix(e->table_data, e->flags, 1);
+    /* Reserved */
+    build_append_int_noprefix(e->table_data, 0, 1);
+    /* Register Region */
+    gas.space_id = AML_SYSTEM_MEMORY;
+    gas.bit_width = e->register_bit_width;
+    gas.bit_offset = 0;
+    gas.access_width = (uint8_t)ctz32(e->register_bit_width) - 2;
+    gas.address = (uint64_t)(e->bar + e->register_offset);
+    build_append_gas_from_struct(e->table_data, &gas);
+    /* Value */
+    build_append_int_noprefix(e->table_data, value, 8);
+    /* Mask */
+    mask = (1ULL << (e->register_bit_width - 1) << 1) - 1;
+    build_append_int_noprefix(e->table_data, mask, 8);
+}
+
+/* ACPI 4.0: 17.4.1 Serialization Action Table */
+void build_erst(GArray *table_data, BIOSLinker *linker, Object *erst_dev,
+    const char *oem_id, const char *oem_table_id)
+{
+    /*
+     * Serialization Action Table
+     * The serialization action table must be generated first
+     * so that its size can be known in order to populate the
+     * Instruction Entry Count field.
+     */
+    unsigned action;
+    GArray *table_instruction_data = g_array_new(FALSE, FALSE, sizeof(char));
+    pcibus_t bar0 = pci_get_bar_addr(PCI_DEVICE(erst_dev), 0);
+    AcpiTable table = { .sig = "ERST", .rev = 1, .oem_id = oem_id,
+                        .oem_table_id = oem_table_id };
+    /* Contexts for the different ways ACTION and VALUE are accessed */
+    BuildSerializationInstructionEntry rd_value_32_val = {
+        .table_data = table_instruction_data, .bar = bar0, .flags = 0,
+        .instruction = INST_READ_REGISTER_VALUE,
+        .register_bit_width = 32,
+        .register_offset = ERST_VALUE_OFFSET,
+    };
+    BuildSerializationInstructionEntry rd_value_32 = {
+        .table_data = table_instruction_data, .bar = bar0, .flags = 0,
+        .instruction = INST_READ_REGISTER,
+        .register_bit_width = 32,
+        .register_offset = ERST_VALUE_OFFSET,
+    };
+    BuildSerializationInstructionEntry rd_value_64 = {
+        .table_data = table_instruction_data, .bar = bar0, .flags = 0,
+        .instruction = INST_READ_REGISTER,
+        .register_bit_width = 64,
+        .register_offset = ERST_VALUE_OFFSET,
+    };
+    BuildSerializationInstructionEntry wr_value_32_val = {
+        .table_data = table_instruction_data, .bar = bar0, .flags = 0,
+        .instruction = INST_WRITE_REGISTER_VALUE,
+        .register_bit_width = 32,
+        .register_offset = ERST_VALUE_OFFSET,
+    };
+    BuildSerializationInstructionEntry wr_value_32 = {
+        .table_data = table_instruction_data, .bar = bar0, .flags = 0,
+        .instruction = INST_WRITE_REGISTER,
+        .register_bit_width = 32,
+        .register_offset = ERST_VALUE_OFFSET,
+    };
+    BuildSerializationInstructionEntry wr_value_64 = {
+        .table_data = table_instruction_data, .bar = bar0, .flags = 0,
+        .instruction = INST_WRITE_REGISTER,
+        .register_bit_width = 64,
+        .register_offset = ERST_VALUE_OFFSET,
+    };
+    BuildSerializationInstructionEntry wr_action = {
+        .table_data = table_instruction_data, .bar = bar0, .flags = 0,
+        .instruction = INST_WRITE_REGISTER_VALUE,
+        .register_bit_width = 32,
+        .register_offset = ERST_ACTION_OFFSET,
+    };
+
+    trace_acpi_erst_pci_bar_0(bar0);
+
+    /* Serialization Instruction Entries */
+    action = ACTION_BEGIN_WRITE_OPERATION;
+    build_serialization_instruction(&wr_action, action, action);
+
+    action = ACTION_BEGIN_READ_OPERATION;
+    build_serialization_instruction(&wr_action, action, action);
+
+    action = ACTION_BEGIN_CLEAR_OPERATION;
+    build_serialization_instruction(&wr_action, action, action);
+
+    action = ACTION_END_OPERATION;
+    build_serialization_instruction(&wr_action, action, action);
+
+    action = ACTION_SET_RECORD_OFFSET;
+    build_serialization_instruction(&wr_value_32, action, 0);
+    build_serialization_instruction(&wr_action, action, action);
+
+    action = ACTION_EXECUTE_OPERATION;
+    build_serialization_instruction(&wr_value_32_val, action,
+        ERST_EXECUTE_OPERATION_MAGIC);
+    build_serialization_instruction(&wr_action, action, action);
+
+    action = ACTION_CHECK_BUSY_STATUS;
+    build_serialization_instruction(&wr_action, action, action);
+    build_serialization_instruction(&rd_value_32_val, action, 0x01);
+
+    action = ACTION_GET_COMMAND_STATUS;
+    build_serialization_instruction(&wr_action, action, action);
+    build_serialization_instruction(&rd_value_32, action, 0);
+
+    action = ACTION_GET_RECORD_IDENTIFIER;
+    build_serialization_instruction(&wr_action, action, action);
+    build_serialization_instruction(&rd_value_64, action, 0);
+
+    action = ACTION_SET_RECORD_IDENTIFIER;
+    build_serialization_instruction(&wr_value_64, action, 0);
+    build_serialization_instruction(&wr_action, action, action);
+
+    action = ACTION_GET_RECORD_COUNT;
+    build_serialization_instruction(&wr_action, action, action);
+    build_serialization_instruction(&rd_value_32, action, 0);
+
+    action = ACTION_BEGIN_DUMMY_WRITE_OPERATION;
+    build_serialization_instruction(&wr_action, action, action);
+
+    action = ACTION_GET_ERROR_LOG_ADDRESS_RANGE;
+    build_serialization_instruction(&wr_action, action, action);
+    build_serialization_instruction(&rd_value_64, action, 0);
+
+    action = ACTION_GET_ERROR_LOG_ADDRESS_LENGTH;
+    build_serialization_instruction(&wr_action, action, action);
+    build_serialization_instruction(&rd_value_64, action, 0);
+
+    action = ACTION_GET_ERROR_LOG_ADDRESS_RANGE_ATTRIBUTES;
+    build_serialization_instruction(&wr_action, action, action);
+    build_serialization_instruction(&rd_value_32, action, 0);
+
+    action = ACTION_GET_EXECUTE_OPERATION_TIMINGS;
+    build_serialization_instruction(&wr_action, action, action);
+    build_serialization_instruction(&rd_value_64, action, 0);
+
+    /* Serialization Header */
+    acpi_table_begin(&table, table_data);
+
+    /* Serialization Header Size */
+    build_append_int_noprefix(table_data, 48, 4);
+
+    /* Reserved */
+    build_append_int_noprefix(table_data,  0, 4);
+
+    /*
+     * Instruction Entry Count
+     * Each instruction entry is 32 bytes
+     */
+    g_assert((table_instruction_data->len) % 32 == 0);
+    build_append_int_noprefix(table_data,
+        (table_instruction_data->len / 32), 4);
+
+    /* Serialization Instruction Entries */
+    g_array_append_vals(table_data, table_instruction_data->data,
+        table_instruction_data->len);
+    g_array_free(table_instruction_data, TRUE);
+
+    acpi_table_end(linker, &table);
+}
+
 /*******************************************************************/
 /*******************************************************************/
 static uint8_t *get_nvram_ptr_by_index(ERSTDeviceState *s, unsigned index)
-- 
MST




reply via email to

[Prev in Thread] Current Thread [Next in Thread]