[PULL 00/39] target-arm queue

[Peter Maydell]

The following changes since commit 55ef0b702bc2c90c3c4ed97f97676d8f139e5ca1:

  Merge remote-tracking branch 
'remotes/lvivier-gitlab/tags/linux-user-for-7.0-pull-request' into staging 
(2022-02-07 10:48:25 +0000)

are available in the Git repository at:

  https://git.linaro.org/people/pmaydell/qemu-arm.git 
tags/pull-target-arm-20220208

for you to fetch changes up to 4fd1ebb10593087d45d2f56f7f3d13447d24802c:

  hw/sensor: Add lsm303dlhc magnetometer device (2022-02-08 10:56:29 +0000)

----------------------------------------------------------------
target-arm queue:
 * Fix handling of SVE ZCR_LEN when using VHE
 * xlnx-zynqmp: 'Or' the QSPI / QSPI DMA IRQs
 * Don't ever enable PSCI when booting guest in EL3
 * Adhere to SMCCC 1.3 section 5.2
 * highbank: Fix issues with booting SMP
 * midway: Fix issues booting at all
 * boot: Drop existing dtb /psci node rather than retaining it
 * versal-virt: Always call arm_load_kernel()
 * force flag recalculation when messing with DAIF
 * hw/timer/armv7m_systick: Update clock source before enabling timer
 * hw/arm/smmuv3: Fix device reset
 * hw/intc/arm_gicv3_its: refactorings and minor bug fixes
 * hw/sensor: Add lsm303dlhc magnetometer device

----------------------------------------------------------------
Alex Bennée (1):
      arm: force flag recalculation when messing with DAIF

Edgar E. Iglesias (1):
      hw/arm: versal-virt: Always call arm_load_kernel()

Eric Auger (1):
      hw/arm/smmuv3: Fix device reset

Francisco Iglesias (1):
      hw/arm/xlnx-zynqmp: 'Or' the QSPI / QSPI DMA IRQs

Kevin Townsend (1):
      hw/sensor: Add lsm303dlhc magnetometer device

Peter Maydell (29):
      target/arm: make psci-conduit settable after realize
      cpu.c: Make start-powered-off settable after realize
      hw/arm/boot: Support setting psci-conduit based on guest EL
      hw/arm: imx: Don't enable PSCI conduit when booting guest in EL3
      hw/arm: allwinner: Don't enable PSCI conduit when booting guest in EL3
      hw/arm/xlnx-zcu102: Don't enable PSCI conduit when booting guest in EL3
      hw/arm/versal: Let boot.c handle PSCI enablement
      hw/arm/virt: Let boot.c handle PSCI enablement
      hw/arm: highbank: For EL3 guests, don't enable PSCI, start all cores
      arm: tcg: Adhere to SMCCC 1.3 section 5.2
      hw/arm/highbank: Drop use of secure_board_setup
      hw/arm/boot: Prevent setting both psci_conduit and secure_board_setup
      hw/arm/boot: Don't write secondary boot stub if using PSCI
      hw/arm/highbank: Drop unused secondary boot stub code
      hw/arm/boot: Drop nb_cpus field from arm_boot_info
      hw/arm/boot: Drop existing dtb /psci node rather than retaining it
      hw/intc/arm_gicv3_its: Use address_space_map() to access command queue 
packets
      hw/intc/arm_gicv3_its: Keep DTEs as a struct, not a raw uint64_t
      hw/intc/arm_gicv3_its: Pass DTEntry to update_dte()
      hw/intc/arm_gicv3_its: Keep CTEs as a struct, not a raw uint64_t
      hw/intc/arm_gicv3_its: Pass CTEntry to update_cte()
      hw/intc/arm_gicv3_its: Fix address calculation in get_ite() and 
update_ite()
      hw/intc/arm_gicv3_its: Avoid nested ifs in get_ite()
      hw/intc/arm_gicv3_its: Pass ITE values back from get_ite() via a struct
      hw/intc/arm_gicv3_its: Make update_ite() use ITEntry
      hw/intc/arm_gicv3_its: Drop TableDesc and CmdQDesc valid fields
      hw/intc/arm_gicv3_its: In MAPC with V=0, don't check rdbase field
      hw/intc/arm_gicv3_its: Don't allow intid 1023 in MAPI/MAPTI
      hw/intc/arm_gicv3_its: Split error checks

Richard Henderson (4):
      target/arm: Fix sve_zcr_len_for_el for VHE mode running
      target/arm: Tidy sve_exception_el for CPACR_EL1 access
      target/arm: Fix {fp, sve}_exception_el for VHE mode running
      target/arm: Use CPTR_TFP with CPTR_EL3 in fp_exception_el

Richard Petri (1):
      hw/timer/armv7m_systick: Update clock source before enabling timer

 hw/intc/gicv3_internal.h               |  23 +-
 include/hw/arm/boot.h                  |  14 +-
 include/hw/arm/xlnx-versal.h           |   1 -
 include/hw/arm/xlnx-zynqmp.h           |   2 +
 include/hw/intc/arm_gicv3_its_common.h |   2 -
 cpu.c                                  |  22 +-
 hw/arm/allwinner-h3.c                  |   9 +-
 hw/arm/aspeed.c                        |   1 -
 hw/arm/boot.c                          | 107 ++++-
 hw/arm/exynos4_boards.c                |   1 -
 hw/arm/fsl-imx6ul.c                    |   2 -
 hw/arm/fsl-imx7.c                      |   8 +-
 hw/arm/highbank.c                      |  72 +---
 hw/arm/imx25_pdk.c                     |   3 +-
 hw/arm/kzm.c                           |   1 -
 hw/arm/mcimx6ul-evk.c                  |   2 +-
 hw/arm/mcimx7d-sabre.c                 |   2 +-
 hw/arm/npcm7xx.c                       |   3 -
 hw/arm/orangepi.c                      |   5 +-
 hw/arm/raspi.c                         |   1 -
 hw/arm/realview.c                      |   1 -
 hw/arm/sabrelite.c                     |   1 -
 hw/arm/sbsa-ref.c                      |   1 -
 hw/arm/smmuv3.c                        |   6 +
 hw/arm/vexpress.c                      |   1 -
 hw/arm/virt.c                          |  13 +-
 hw/arm/xilinx_zynq.c                   |   1 -
 hw/arm/xlnx-versal-virt.c              |  17 +-
 hw/arm/xlnx-versal.c                   |   5 +-
 hw/arm/xlnx-zcu102.c                   |   1 +
 hw/arm/xlnx-zynqmp.c                   |  25 +-
 hw/intc/arm_gicv3_its.c                | 696 +++++++++++++++------------------
 hw/sensor/lsm303dlhc_mag.c             | 556 ++++++++++++++++++++++++++
 hw/timer/armv7m_systick.c              |   8 +-
 target/arm/cpu.c                       |   6 +-
 target/arm/helper-a64.c                |   2 +
 target/arm/helper.c                    | 118 ++++--
 target/arm/psci.c                      |  35 +-
 tests/qtest/lsm303dlhc-mag-test.c      | 148 +++++++
 hw/sensor/Kconfig                      |   4 +
 hw/sensor/meson.build                  |   1 +
 tests/qtest/meson.build                |   1 +
 42 files changed, 1308 insertions(+), 620 deletions(-)
 create mode 100644 hw/sensor/lsm303dlhc_mag.c
 create mode 100644 tests/qtest/lsm303dlhc-mag-test.c