qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v11 4/4] target/ppc: trigger PERFM EBBs from power8-pmu.c


From: Cédric Le Goater
Subject: Re: [PATCH v11 4/4] target/ppc: trigger PERFM EBBs from power8-pmu.c
Date: Tue, 15 Feb 2022 17:37:16 +0100
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:91.0) Gecko/20100101 Thunderbird/91.5.0

On 2/11/22 19:33, Daniel Henrique Barboza wrote:
This patch adds the EBB exception support that are triggered by
Performance Monitor alerts. This happens when a Performance Monitor
alert occurs and MMCR0_EBE, BESCR_PME and BESCR_GE are set.

fire_PMC_interrupt() will execute a new ebb_perfm_excp() helper that
will check for MMCR0_EBE, BESCR_PME and BESCR_GE bits. If all bits are
set, do_ebb() will attempt to trigger a PERFM EBB event.

If the EBB facility is enabled in both FSCR and HFSCR we consider that
the EBB is valid and set BESCR_PMEO. After that, if we're running in
problem state, fire a POWERPC_EXCP_PERM_EBB immediately. Otherwise we'll
queue a PPC_INTERRUPT_EBB.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

Looks good. One comment below.


---
  target/ppc/excp_helper.c | 48 ++++++++++++++++++++++++++++++++++++++++
  target/ppc/helper.h      |  1 +
  target/ppc/power8-pmu.c  |  3 +--
  3 files changed, 50 insertions(+), 2 deletions(-)

diff --git a/target/ppc/excp_helper.c b/target/ppc/excp_helper.c
index ad40a0f8e6..0c031e67b1 100644
--- a/target/ppc/excp_helper.c
+++ b/target/ppc/excp_helper.c
@@ -1948,6 +1948,54 @@ void helper_rfebb(CPUPPCState *env, target_ulong s)
          env->spr[SPR_BESCR] &= ~BESCR_GE;
      }
  }
+
+/*
+ * Triggers or queues an 'ebb_excp' EBB exception. All checks
+ * but FSCR, HFSCR and msr_pr must be done beforehand.
+ *
+ * PowerISA v3.1 isn't clear about whether an EBB should be
+ * postponed or cancelled if the EBB facility is unavailable.
+ * Our assumption here is that the EBB is cancelled if both
+ * FSCR and HFSCR EBB facilities aren't available.
+ */
+static void do_ebb(CPUPPCState *env, int ebb_excp)
+{
+    PowerPCCPU *cpu = env_archcpu(env);
+    CPUState *cs = CPU(cpu);
+
+    /*
+     * FSCR_EBB and FSCR_IC_EBB are the same bits used with
+     * HFSCR.
+     */
+    helper_fscr_facility_check(env, FSCR_EBB, 0, FSCR_IC_EBB);
+    helper_hfscr_facility_check(env, FSCR_EBB, "EBB", FSCR_IC_EBB);
+
+    if (ebb_excp == POWERPC_EXCP_PERFM_EBB) {
+        env->spr[SPR_BESCR] |= BESCR_PMEO;
+    } else if (ebb_excp == POWERPC_EXCP_EXTERNAL_EBB) {
+        env->spr[SPR_BESCR] |= BESCR_EEO;
+    }
+
+    if (msr_pr == 1) {
+        powerpc_excp(cpu, ebb_excp);
+    } else {
+        env->pending_interrupts |= 1 << PPC_INTERRUPT_EBB;
+        cpu_interrupt(cs, CPU_INTERRUPT_HARD);
+    }

Don't you need to lock the iothread ?

Thanks,

C.

+}
+
+void helper_ebb_perfm_excp(CPUPPCState *env)
+{
+    bool perfm_ebb_enabled = env->spr[SPR_POWER_MMCR0] & MMCR0_EBE &&
+                             env->spr[SPR_BESCR] & BESCR_PME &&
+                             env->spr[SPR_BESCR] & BESCR_GE;
+
+    if (!perfm_ebb_enabled) {
+        return;
+    }
+
+    do_ebb(env, POWERPC_EXCP_PERFM_EBB);
+}
  #endif
/*****************************************************************************/
diff --git a/target/ppc/helper.h b/target/ppc/helper.h
index f2e5060910..adc31235a8 100644
--- a/target/ppc/helper.h
+++ b/target/ppc/helper.h
@@ -19,6 +19,7 @@ DEF_HELPER_1(rfid, void, env)
  DEF_HELPER_1(rfscv, void, env)
  DEF_HELPER_1(hrfid, void, env)
  DEF_HELPER_2(rfebb, void, env, tl)
+DEF_HELPER_1(ebb_perfm_excp, void, env)
  DEF_HELPER_2(store_lpcr, void, env, tl)
  DEF_HELPER_2(store_pcr, void, env, tl)
  DEF_HELPER_2(store_mmcr0, void, env, tl)
diff --git a/target/ppc/power8-pmu.c b/target/ppc/power8-pmu.c
index d245663158..38e1ecb782 100644
--- a/target/ppc/power8-pmu.c
+++ b/target/ppc/power8-pmu.c
@@ -307,8 +307,7 @@ static void fire_PMC_interrupt(PowerPCCPU *cpu)
          env->spr[SPR_POWER_MMCR0] |= MMCR0_PMAO;
      }
- /* PMC interrupt not implemented yet */
-    return;
+    helper_ebb_perfm_excp(env);
  }
/* This helper assumes that the PMC is running. */




reply via email to

[Prev in Thread] Current Thread [Next in Thread]