[PATCH 1/5] hw/intc/arm_gicv3_its: Add trace events for commands

[Peter Maydell]

When debugging code that's using the ITS, it's helpful to
see tracing of the ITS commands that the guest executes. Add
suitable trace events.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/intc/arm_gicv3_its.c | 28 ++++++++++++++++++++++++++--
 hw/intc/trace-events    | 12 ++++++++++++
 2 files changed, 38 insertions(+), 2 deletions(-)

diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c
index 4f598d3c14f..77dc702734b 100644
--- a/hw/intc/arm_gicv3_its.c
+++ b/hw/intc/arm_gicv3_its.c
@@ -366,6 +366,19 @@ static ItsCmdResult process_its_cmd(GICv3ITSState *s, 
const uint64_t *cmdpkt,
 
     devid = (cmdpkt[0] & DEVID_MASK) >> DEVID_SHIFT;
     eventid = cmdpkt[1] & EVENTID_MASK;
+    switch (cmd) {
+    case INTERRUPT:
+        trace_gicv3_its_cmd_int(devid, eventid);
+        break;
+    case CLEAR:
+        trace_gicv3_its_cmd_clear(devid, eventid);
+        break;
+    case DISCARD:
+        trace_gicv3_its_cmd_discard(devid, eventid);
+        break;
+    default:
+        g_assert_not_reached();
+    }
     return do_process_its_cmd(s, devid, eventid, cmd);
 }
 
@@ -382,15 +395,16 @@ static ItsCmdResult process_mapti(GICv3ITSState *s, const 
uint64_t *cmdpkt,
 
     devid = (cmdpkt[0] & DEVID_MASK) >> DEVID_SHIFT;
     eventid = cmdpkt[1] & EVENTID_MASK;
+    icid = cmdpkt[2] & ICID_MASK;
 
     if (ignore_pInt) {
         pIntid = eventid;
+        trace_gicv3_its_cmd_mapi(devid, eventid, icid);
     } else {
         pIntid = (cmdpkt[1] & pINTID_MASK) >> pINTID_SHIFT;
+        trace_gicv3_its_cmd_mapti(devid, eventid, icid, pIntid);
     }
 
-    icid = cmdpkt[2] & ICID_MASK;
-
     if (devid >= s->dt.num_entries) {
         qemu_log_mask(LOG_GUEST_ERROR,
                       "%s: invalid command attributes: devid %d>=%d",
@@ -484,6 +498,7 @@ static ItsCmdResult process_mapc(GICv3ITSState *s, const 
uint64_t *cmdpkt)
     } else {
         cte.rdbase = 0;
     }
+    trace_gicv3_its_cmd_mapc(icid, cte.rdbase, cte.valid);
 
     if (icid >= s->ct.num_entries) {
         qemu_log_mask(LOG_GUEST_ERROR, "ITS MAPC: invalid ICID 0x%d", icid);
@@ -539,6 +554,8 @@ static ItsCmdResult process_mapd(GICv3ITSState *s, const 
uint64_t *cmdpkt)
     dte.ittaddr = (cmdpkt[2] & ITTADDR_MASK) >> ITTADDR_SHIFT;
     dte.valid = cmdpkt[2] & CMD_FIELD_VALID_MASK;
 
+    trace_gicv3_its_cmd_mapd(devid, dte.size, dte.ittaddr, dte.valid);
+
     if (devid >= s->dt.num_entries) {
         qemu_log_mask(LOG_GUEST_ERROR,
                       "ITS MAPD: invalid device ID field 0x%x >= 0x%x\n",
@@ -562,6 +579,8 @@ static ItsCmdResult process_movall(GICv3ITSState *s, const 
uint64_t *cmdpkt)
     rd1 = FIELD_EX64(cmdpkt[2], MOVALL_2, RDBASE1);
     rd2 = FIELD_EX64(cmdpkt[3], MOVALL_3, RDBASE2);
 
+    trace_gicv3_its_cmd_movall(rd1, rd2);
+
     if (rd1 >= s->gicv3->num_cpu) {
         qemu_log_mask(LOG_GUEST_ERROR,
                       "%s: RDBASE1 %" PRId64
@@ -601,6 +620,8 @@ static ItsCmdResult process_movi(GICv3ITSState *s, const 
uint64_t *cmdpkt)
     eventid = FIELD_EX64(cmdpkt[1], MOVI_1, EVENTID);
     new_icid = FIELD_EX64(cmdpkt[2], MOVI_2, ICID);
 
+    trace_gicv3_its_cmd_movi(devid, eventid, new_icid);
+
     if (devid >= s->dt.num_entries) {
         qemu_log_mask(LOG_GUEST_ERROR,
                       "%s: invalid command attributes: devid %d>=%d",
@@ -779,6 +800,7 @@ static void process_cmdq(GICv3ITSState *s)
              * is already consistent by the time SYNC command is executed.
              * Hence no further processing is required for SYNC command.
              */
+            trace_gicv3_its_cmd_sync();
             break;
         case GITS_CMD_MAPD:
             result = process_mapd(s, cmdpkt);
@@ -803,6 +825,7 @@ static void process_cmdq(GICv3ITSState *s)
              * need to trigger lpi priority re-calculation to be in
              * sync with LPI config table or pending table changes.
              */
+            trace_gicv3_its_cmd_inv();
             for (i = 0; i < s->gicv3->num_cpu; i++) {
                 gicv3_redist_update_lpi(&s->gicv3->cpu[i]);
             }
@@ -814,6 +837,7 @@ static void process_cmdq(GICv3ITSState *s)
             result = process_movall(s, cmdpkt);
             break;
         default:
+            trace_gicv3_its_cmd_unknown(cmd);
             break;
         }
         if (result == CMD_CONTINUE) {
diff --git a/hw/intc/trace-events b/hw/intc/trace-events
index b28cda4e08e..e92662b405c 100644
--- a/hw/intc/trace-events
+++ b/hw/intc/trace-events
@@ -176,6 +176,18 @@ gicv3_its_write(uint64_t offset, uint64_t data, unsigned 
size) "GICv3 ITS write:
 gicv3_its_badwrite(uint64_t offset, uint64_t data, unsigned size) "GICv3 ITS 
write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u: error"
 gicv3_its_translation_write(uint64_t offset, uint64_t data, unsigned size, 
uint32_t requester_id) "GICv3 ITS TRANSLATER write: offset 0x%" PRIx64 " data 
0x%" PRIx64 " size %u requester_id 0x%x"
 gicv3_its_process_command(uint32_t rd_offset, uint8_t cmd) "GICv3 ITS: 
processing command at offset 0x%x: 0x%x"
+gicv3_its_cmd_int(uint32_t devid, uint32_t eventid) "GICv3 ITS: command INT 
DeviceID 0x%x EventID 0x%x"
+gicv3_its_cmd_clear(uint32_t devid, uint32_t eventid) "GICv3 ITS: command 
CLEAR DeviceID 0x%x EventID 0x%x"
+gicv3_its_cmd_discard(uint32_t devid, uint32_t eventid) "GICv3 ITS: command 
DISCARD DeviceID 0x%x EventID 0x%x"
+gicv3_its_cmd_sync(void) "GICv3 ITS: command SYNC"
+gicv3_its_cmd_mapd(uint32_t devid, uint32_t size, uint64_t ittaddr, int valid) 
"GICv3 ITS: command MAPD DeviceID 0x%x Size 0x%x ITT_addr 0x%" PRIx64 " V %d"
+gicv3_its_cmd_mapc(uint32_t icid, uint64_t rdbase, int valid) "GICv3 ITS: 
command MAPC ICID 0x%x RDbase 0x%" PRIx64 " V %d"
+gicv3_its_cmd_mapi(uint32_t devid, uint32_t eventid, uint32_t icid) "GICv3 
ITS: command MAPI DeviceID 0x%x EventID 0x%x ICID 0x%x"
+gicv3_its_cmd_mapti(uint32_t devid, uint32_t eventid, uint32_t icid, uint32_t 
intid) "GICv3 ITS: command MAPTI DeviceID 0x%x EventID 0x%x ICID 0x%x pINTID 
0x%x"
+gicv3_its_cmd_inv(void) "GICv3 ITS: command INV or INVALL"
+gicv3_its_cmd_movall(uint64_t rd1, uint64_t rd2) "GICv3 ITS: command MOVALL 
RDbase1 0x%" PRIx64 " RDbase2 0x%" PRIx64
+gicv3_its_cmd_movi(uint32_t devid, uint32_t eventid, uint32_t icid) "GICv3 
ITS: command MOVI DeviceID 0x%x EventID 0x%x ICID 0x%x"
+gicv3_its_cmd_unknown(unsigned cmd) "GICv3 ITS: unknown command 0x%x"
 
 # armv7m_nvic.c
 nvic_recompute_state(int vectpending, int vectpending_prio, int 
exception_prio) "NVIC state recomputed: vectpending %d vectpending_prio %d 
exception_prio %d"
-- 
2.25.1